Megger DCM320 Clampmeter - 400A AC

SKU: MEGGDCM320
Low cost current clamp with additional multimeter functions. Measures up to 400A AC and voltages up to 600V a.c. / d.c. + resistance to 20M ohms.
More Info
In Stock - Available Next Day

Megger DCM320 Clamp Meter 1000-304

The Megger DCM320 is an ideal clamp meter for use during the installation, maintenance and checking of electrical systems and equipment.

The DCM 320 clampmeter will measure AC current (50 - 60 Hz) up to 400 A, with a Data-hold feature to freeze the displayed value for use in confined situations where the display may be difficult to read. The DCM320 has the benefit of measurement ranges for a.c. and d.c. voltages up to 600 V, and resistance up to 20 MΩ, via the terminals and supplied test leads. It also has a continuity buzzer that operates up to 20 Ω.

The Megger DCM320 clamp meter is safety rated to IEC 61010 CAT III 600 V, so offering high levels of protection to the operator. A carrying case is included, and even without the case, this current clamp meter is rated to withstand a 1.2 m drop onto a hard surface without damage. The compact clamp jaw enables cables to be measured as large as 27 mm diameter, so covering the majority of applications within the electrical system installation industry. Ideal for use by anyone working on basic electrical systems or equipment, these instruments are also suitable for the majority of applications encountered by the electrical contractor.

  • Data Hold feature
  • Small pocket-size design
  • Exceptional battery lifetime
  • Supplied with carry case
  • Current only and multimeter models
  • Measures up to 400 A a.c. with low current ranges for improved resolution
  • 600 V ac/dc
  • 20 MΩ Resistance
  • IEC61010 CAT III 600 V
Specification
AC Current Range 0-40A, 40-200A, 201-400A
AC Current Accuracy ±1.9% ± 10 digits, ±1.9% ± 5 digits, ±1.9% ± 10 digits,
Position Error ±1.5% of reading
DC and AC Volts Ranges 0-200V, 200-600V
DC/AC Volts Accuracy DC: ±1% ±2 digits, AC: ¶±1.5%±5digits (50-500Hz)