Martindale LP2000 Loop Tester

The Martindale LP2000 Loop Tester is a high current loop tester that is fast, accurate and has an auto-ranging ability. The LP2000 can carry out both phase earth testing and phase neutral testing and it automatically displays PSCC readings.

A TL61 green wander lead is provided with this tester, enabling you to test bonded metalwork and making this a highly verstile loop tester.

► Soft protective case
► TL205 mains test lead
► TL61 green wander lead
► Manual

► Voltage range: 200 - 260V rms
► Frequency range: 50 - 60Hz
► Test Current: 24A, rms, for two half cycles at 240V
► Loop Range: 0 to 15Ω nominal in steps of 0.01Ω, 15 to 199.9Ω in steps of 0.1Ω
► Accuracy: ±2% of reading, ±2 digit
► Temperature Coefficient: ±0.1% / °C
► Ipsc Range: 0 to 19.99kA in steps of 0.01kA
► Fuse: 5A, HBC, Anti-Surge ceramic, DIN 5 X 20mm
► Transient Protection: VDR at input
► Thermal Protection: Electronic delay
► Operating Temperature: 0°C to +40°C
► Storage Temperature: -20°C to +70°C
► Operating Humidity: 90% RH max at +40°C
► Overvoltage Category: Category III

► Complies with EMC: To BS EN 50081-1, BS EN 50082-1
► Complies with LVD: To BS EN 61010-1

► Dimensions: 54 x 190 x 90mm
► Weight: 400g