MEGGER RCDT330 Downloadable RCD Tester

The Megger RCDT330 tester can perform 1/2I, 1xI and 5xI tests on RCDs rated at 10 mA, 30 mA, 100 mA, 300 mA, 500 mA & 1000mA on general and selective (time delayed) & programable RCD's. Add this to the fact that you can download via USB up to 1000 test results with the supplied download manager software and you've got a RCD tester for every eventuality! The RCDT330's Data is stored in non volatile memory, being retained when the instrument is switched off or batteries are exhausted. A Job reference number (up to 256) can be selected, allowing separate locations to be tested with the RCDT330 and easily separated when downloaded.  A memory bar graph acts as a ‘Fuel Gauge’ showing how much memory has been used. Test results are downloaded to CSV (Coma Separated Variable) spreadsheets. The RCD T330 is Meggers flagship downloadable RCD tester.


►Tests standard RCD's, DC RCD's, selective RCD, and programmable residual current devices (RCD's)
►Ramp testing
►Auto (Remote) testing
►3 Phase safe
►Weatherproof to IP54
►3 Year Megger warranty
►Megger calibration certificate
►Store test results & download with the USB interface
►Enables testing on 110 V centre tapped supplies
►Tough rubber armoured case with built-in cover
►Comes Supplied with Megger Download Manager Software FREE

► 3 Year Megger warranty
► Megger calibration certificate
► Plug ended test lead
► 2 wire test lead probe/ croc clip ended
► Hard carry case with shoulder strap
► Comes Supplied with Megger Download Manager Software FREE

MEGGER RCDT330 Specifications:

Weight:
980gms
Dimensions:
203x148x78 mm
Power Supply:
RCDT330 50 V - 280 V 45 Hz to 65 Hz
Batteries: 8 x 1,5 V cells IEC LR6 type (AA alkaline).
Rechargeable: 8 x 1.2 V NiCd or NiMH cells.
Battery Life: 2000 consecutive tests
RCD Test Ranges (to EN61557-6)
Test Current Accuracy:
No Trip Test:
(1/2I) –8% to –2%
Trip Test:
(I, 5I) +2% to +8%
Trip Time:
±1% ±1ms
Voltage measurement - (RCDT330, RCDT320 & RCDT310)
Range ac:
0V - 300V 25Hz to 450Hz
Accuracy:
±2% ±2 digits
Frequency measurement - (RCDT330 & RCDT320 ONLY)
Range:
25Hz to 450Hz
Accuracy:
200Hz to 450Hz ±1Hz
25.0Hz to 199.9Hz ±0.1Hz
Fault (Touch) Voltage:
Displayed range:
0 V to 50 V
Error: +5%/+15% ±0.5 V
Download / connectivity:  - (RCDT330 ONLY)
USB interface
Programmable RCD step Increments - (RCDT330 ONLY)
10 mA to 50 mA - 1 mA steps
50 mA to 500 mA - 5 mA steps
500 mA to 1000 mA - 10 mA steps
Test result storage (1000 results) - (RCDT330 ONLY)
Job Number 256 locations
Distribution Board no. 99 locations
Circuits 99 locations
Phases P1, P2, P3
Last recorded result may be recalled to the display.
All data can be downloaded to a PC using Download Manager (Supplied RCDT330 ONLY)
or Megger Powersuite Professional Windows software (Optional).

Temperature and humidity
Operating Range:
-5°C to +40°C
Operating Humidity:
93% R.H. at +40°C max.
Storage Range:
-25°C to +70°C
Maximum altitude:
2000m
Environmental Protection:
IP54

The Megger RCDT330 meets these Safety standards:
The requirements of IEC61010-1 Cat III 300V phase to earth.
IEC61557 Complies with the following parts of EN61557, Electrical safety in low voltage systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures:
Part1 - General Requirements
Part4 - Residual current devices
E.M.C.
In accordance with IEC61326-1