METREL MI3000 Easi Plus Multifunction Tester

The Metrel MI3000 Easi Plus 17th edition tester allows you to test and certify fixed electrical installation in compliance with the Part P, 17th Edition regulations, BS7671 and BS EN61557. The Metrel Easi Plus MI3000 can perform a variety of electrical tests including: Continuity Testing, Insulation Testing, Fully automatic RCD testing including Ramp Test and a no RCD trip feature, Earth Loop impedance testing, Real-time AC Voltage monitoring, PSC (prospective shirt circuit current) and Phase Rotation Testing. Basically all the tests you need to fully ensure safety within electrical installations in both commercial and domestic environments - Single and Three Phase. Its an ideal Installation Tester for electricians installers and commisioning engineers. Weighing less than 1.3kg, the Easi Plus has taken both speed of testing and portability into consideration.

The Metrel Easi Plus 17th Edition Tester also offers voltage protection on all its test ranges so the tester will not be damaged if incorrectly connected across phases. The Metrel MI3000 has substantial capabilities of testing RCD's. The "all 6 in 1 visit" RCD testing mode makes it easy!  Reset the breaker and the Easi Plus MI3000 will carry out all the tests needed. The RCD Ramp test will indicate actual trip current and the RCD Triplock feature will prevent any tripping of RCD's.
The Metrel range is also future proof and can be updated to comply with any future changes in regulations using the data lead for firmware upgrades on the Metrel MI3000.
The life of your batteries are saved with the Auto Power Off function, and with the colour coded rotary switch, and a large clear display, the Metrel Easi Plus MI3000 Multifunction Tester is very easy to use.
The long term reliability of this multifunction tester is guaranteed by Metrel's 3 year warranty and is ready for use with Calibration Certificate also found within the box.
A very cost effective and high quality Tester, if you are looking for a Multifunction Tester that meets all current standards and regulations, comes with a calibration certificate and fully tests both single and three phase installations. One of our best sellers!

►   17th edition compliant on both single and three phase
►   Real-time Voltage Monitoring
►   Includes 3 year manufacturers warranty and Calibration Certificate
►   Supports 110V Systems
►   Light weight, compact and easy to use
►   Fully automatic RCD Testing with NO TRIP RCD Feature

►   Metrel Easi Plus MI3000 Instrument
►   13 Amp mains plug
►   Test cable Universal connection 3 x 1,5 m
►   Power supply adapter + 6 NiMH AA accus
►   Test tip (blue, green, black)
►   Alligator clip, 3 pcs (blue, green, black)
►   Soft carrying neck belt
►   Soft carrying bag
►   Instruction manual-short
►   Instruction manual on CD
►   Handbook "Measurements on electric installations" on CD
►   Calibration Certificate
►   FREE Metrel TEK255 Multimeter (worth £34.95)

►   Continuity Test R1 & R2
►   Insulation tests @ 100v, 250v, 500v, and 1000v
►   Insulation range up to1000MΩ
►   Complete RCD Auto Test - "All 6 tests in 1 visit"
►   RCD Ramp Test - indicates actual trip current
►   RCD Triplock - Guaranteed not to trip RCD's
►   Loop, ZE,ZS,110V,230V and 415V
►   PSC (Measure the potential fault current between phase/neutral and earth/neutral conductors), LE and LN 
►   Multi Voltage System Support 
►   Multi Voltage Monitor  "online" single/3 phase
►   Phase rotation
►   Polarity Test
►   Frequency Test