METREL MI3100 Multifunction Tester

The Metrel MI3100 Eurotest Easi 17th edition installation tester allows you to test and certify fixed electrical installation in compliance with the Part P, 17th Edition regulations, BS7671 and BS EN61557. The New Eurotest Easi features a unique "Pass/Fail" screen with tables for fuse characteristics. All this in a New Compact and Lightweight case, which features Rubber Hand Grips and Protection. Schematic Help Screen shows how to carry out tests.

The Alphatek/Metrel MI 3100 Eurotest Easy can perform a variety of electrical tests including: Continuity Testing, Insulation Testing, RCD testing including Ramp Test and a no RCD trip feature, Earth Loop impedance testing and PSC (prospective shirt circuit current. Basically all the tests you need to fully ensure safety within electrical installations in both commercial and domestic environments. Its an ideal electrical test meter for electricians installers and commisioning engineers. 
The Metrel MI3100 Eurotest Easy Multifunction Tester is battery powered and comes supplied with a charger. Weighing less than 1.3kg, the Eurotest Easi  has taken both speed of testing and portability into consideration.

The Metrel MI3100 Eurotest Easi 17th Edition Tester is also voltage protected on all its test ranges so the tester will not be damaged if incorrectly connected across phases. The Metrel Easiplus has substantial capability of testing RCD's. The "all 6 in 1 visit" RCD testing mode makes it easy!  Reset the breaker and the MI3100 will carry out all the tests needed. The RCD Ramp test will indicate actual trip current and the RCD Triplock feature will prevent any tripping of RCD's.
The life of your batteries are saved with the Auto Power Off function, and with the colour coded rotary switch, and a large clear display, this electrical installation tester is very easy to use. The Alphatek Metrel EasiPlus comes supplied with a manufacturers certificate of conformity and a 3 year warranty.  A cost effective testing meter if you are looking for a Multifunction Tester that meets all current standards and regulations.

►   Fast and reliable loop resistance measurements without RCD tripping
►   Built-in Fuse characteristics database for quick evaluation of measuring results at ZLINE measurement
►   On-line voltage monitor shows voltage levels for L-L, L-N and L-PE during the measurement
►   TN/TT/IT Multi System support
►   Multi-functional tip commander for faster execution of a measuring sequence
►   Rechargeable battery pack with a charger is included in a standard set

►   13 Amp mains plug
►   Multi-function Tip Commander test Probe 
►   Test cable Universal connection 3 x 1,5 m
►   Power supply adapter + 6 NiMH AA accus
►   Test tip (blue, green, black)
►   Alligator clip, 3 pcs (blue, green, black)
►   Soft carrying neck belt
►   Soft carrying bag
►   Instruction manual-short
►   Instruction manual on CD
►   Guide to  "Measurements on electric installations" on CD
►   Manufacturers 3 year Warranty
►   Calibration Certificate
►   FREE Metrel TEK255 Multimeter (worth £34.95)

►   Continuity Test R1 & R2
►   Insulation tests @ 100v, 250v, 500v, and 1000v
►   Insulation range up to1000MΩ
►   Complete RCD Auto Test - "All 6 tests in 1 visit"
►   RCD Ramp Test - indicates actual trip current
►   RCD Triplock - Guaranteed not to trip RCD's
►   Loop, ZE,ZS,110V,230V and 415V
►   PSC (Measure the potential fault current between phase/neutral and earth/neutral conductors), LE and LN 
►   Multi Voltage System Support 
►   Multi Voltage Monitor  "online" single/3 phase
►   Phase rotation
►   Polarity Test
►   Frequency Test

Dimensions (w x h x l): 230 x 103 x 115 mm   Mass (without accessories): 1.3 kg