Martindale FD600 Professional Fuse Finder Kit

The Martindale FD600 finds which fuse, RCD or MCB controls a circuit and also enables tracing from socket to socket on a circuit. The transmitter takes its power from the mains and emits a signal which the adjustable sensitivity receiver can pick up.  In addition the transmitter in the FD600 kit has an IEC socket with a standard UK 3 pin mains adaptor which extends the use to include 13A sockets. The TL83 leads provided in the kit also allow use with light fittings or other points in a circuit where there is no power socket. Both the transmitter and receiver can easily distinguish the appropriate circuit on a crowded fuse board and the thumb wheel allows you to adjust sensitivity to rapidly find the correct RCD.

The Martin dale FD600 allows you to trace from one distribution board to another or to work on lighting circuits.

► Martindale Electric FD500/R receiver
► Martindale Electric FD600 transmitter 
► IEC 13A mains lead adaptor
► TL83 2 wire fused leads with IEC connector
► Carry case
► Battery

Transmitter
► Voltage rating: 230V
► Frequency range: 30 - 70Hz
► Switching frequency: Approx. 5Hz
► Transmission pulse width: approx. 1.7μS
► Transmission pulse amptitude: 20A max.
► Temperature range: -10°C to 40°C at max 60% RH
► Dimensions: Approx: 65 x 65 x 46mm
► Weight: 65g
► Earth Leakage: Nil
► Power supply: From mains
► Power consumption: Approx. 1W
► Overvoltage category: Cat III/300V
► Pollution degree: 2
► Protection Class: IP20

Receiver
► Tracing depth for fuse assignment: approx. 0 - 10cm, depending on local conditions.
► Sensitivity setting: via on/off potentiometer
► Temperature range: -10°C to 40°C at max 60% RH
► Dimensions: 160 x 55 x 30mm
► Weight: approx. 135g (including battery)
► Protection class: IP20
► Power supply: 9V battery, MN1604/PP3, IEC 6LA61 (alkaline only) - not included.

► Units are EMC compliant.
► There are no user serviceable parts in the transmitter or receiver.