MARTINDALE FD650 Elite Fuse Finder Kit

The Martindale FD650 Elite Fuse Finder Kit brings microprocessor controlled multi-level sensitivity to fuse and breaker identification. A 6 segment bargraph gives progressive indication of signal strength which allows even faster identification.

The Elite Fuse Finder can operate in two modes:
Automatic, which has a memory and the ability to automatically adjust sensitivity for foolproof identification.
Manual mode, which allows very rapid fuse finding using the 6 segment bargraph.

This fuse finder kit is capable of operating with either the 13A plug top lead for sockets or the TL83 lead for light fittings or other points in a circuit where there are no standard 13A power sockets. Complete with a non-contact voltage indicator, the FD650 really is a multipurpose version of the F550.

► FD650/R receiver
► FD600/T multi-purpose transmitter
► IEC 13A mains adaptor
► TL83 2 wire fused leads with IEC connector
► Carry case
► Battery

Transmitter
► Voltage rating: 230V
► Frequency range: 50-60Hz
► Switching frequency: approx. 5Hz
► Transmission pulse width: approx. 1.7μS
► Transmission pulse amptitude: 20A max
► Temperature range: -10°C to 40°C at max 60% RH
► Dimensions: Approx: 65 x 65 x 46mm
► Weight: 65g
► Earth Leakage: Nil
► Power supply: From mains
► Power consumption: Approx. 1W
► Overvoltage category: Cat III/300V
► Pollution degree: 2
► Protection Class: IP20

Receiver
► Tracing depth for fuse assignment: approx. 0 - 10cm, depending on local conditions.
► Sensitivity setting: via on/off potentiometer
► Temperature range: -10°C to 40°C at max 60% RH
► Dimensions: 202 x 32 x 22mm.
► Weight: 150g (excluding battery)
► Protection class: IP20
► Power supply: 9V battery, MN1604/PP3, IEC 6LA61 (alkaline only)

Voltage Indicator
► Voltage range: 40 - 600 V
► Sensitivity: Indication distance from a flat PVC 1mm2 twin and earth cable suspended in free space.
3mm at 110V AC 50Hz.
23mm at 240V AC 50Hz.
► Frequency range: 50Hz to 50kHz
► Indication: Red LED and audible tone (2kHz) in the presence of an AC voltage. Green LED indicates internal battery condition.
► Operating temperature: -5° to 40°C
► Not recommended for use on high energy circuits.
► Units are EMC compliant.
► There are no user serviceable parts in the transmitter or receiver.