TRANSMILLE 2080 Calibration Checker

This Calibration Checkbox allows managers, supervisors and electricians a fast way of carrying out regular verification of the most used electricians test meters and test instruments including 17th edition electrical test equipment. With this calibration check box you can meet the requirement of the NICIEC to verify your test instruments. Its low cost and portable it can be used on or off site. Its ideal for the verification of RCD Testers, Earth Loop Testers, Insulation and continuity testers and can also be used on the newer combined / multi-function installation testers. Use it to identify faulty instruments, faulty test leads and avoid both wasting and costly mistakes. 
 

Checking Insulation and Continuity Testers
• 3 high value resistors (1Mohm, 9.9Mohm & 99Mohm) for testing the insulation resistance measurement function.
• LED indication of test voltage at 100V • 250V • 500V • 1000V  • 3 low value resistors ( 0.5ohms, 2ohms & 10ohms) for testing the continuity function.
• AC line voltage output for testing voltage measurement

Checking RCD Testers
• Dedicated 13A socket provides functional check of RCD tester operation
• 3 selectable ranges : 10mA (Nominal) @150ms30mA  (Nominal) @ 150ms
• Indicators for Ready • Tripped • Over current

Checking Earth Loop Testers
A functional check of LOOP Testers, allowing direct measurement of supplied loop impedance and supplied loop impedance + 1 ohm via a dedicated 13A socket

Wiring Checks
When connected, the 2080 checkbox will indicate voltage between the following wires * P-E (Phase to Earth) • P-N (Phase to Neutral) • N-E (Neutral to Earth)  * Does not detect Neutral to Earth reversal
Specification summary:
Loop Testers:     Supply Loop • Supply Loop + 1ohm : 5%
--------------------------------------------------------------------------------
Insulation Testers:  1Mohm : 9.9Mohm : 99Mohm : 1%
Max. Test Voltage 1.2kV
--------------------------------------------------------------------------------
Continuity Testers: 0.5ohm : 2ohm : 10ohm : 1% ± 20mohm
Max. Current  300mA
--------------------------------------------------------------------------------
RCD Testers: 10mA (Nominal) @150ms30mA (Nominal) @ 150ms