Elster A100C (Pulse) Electric Meter

 The Elster A100C  with pulse facility is ideal for use as a generation meter to claim feed in tariffs from solar PV or wind turbine systems. These are brand new Direct Connection Generation meters with no need for CT's (current transformers) so they are simple to install. They are housed in an extremely compact case. To security, the main meter cover is permanently secured to the base during the manufacturing process. This energy meter also provides the choice of IrDA communications or optical IEC 62056-21 (formerly IEC 61107) communications. The liquid crystal display has large (9.8mm), high contrast characters that can be viewed from a wide angle. Chevrons and multilingual legends on the nameplate identify the values being displayed. The energy registers can be configured for the required number of digits and for the position of the decimal point. The Elster A100C offers high security and detects many of the most commonly used tamper techniques. Security features of the A100C meter include reverse run energy total and count; power fail and elapsed time count; hours in anti-creep; hours in Rate 1, Rate 2 and hours since last power up time. These are stored as security data and can be included as part of the display sequence and read via the optical communications ports.

► Accuracy Class 2
► Up to 100Amp Direct Input (No need for CT's)
► 1 Phase 2 wire
► Pulse output for remote monitoring
► kWh import or kWh import/export
► 20 years certified life
► Large digit (9.8mm) multilingual display with chevron information indication
► Extensive security data
► Communications as standard
► 12kV impulse withstand
► High security, compact design (130mm Wide x 97mm High x 47mm Deep)
► BS double insulated, glass filled polycarbonate case
► Permanently fixed main cover
► IP53 in accordance with IEC 60529:1989

Solar Panel Installers?

This Elster A100 with pulse output is recommended for use by Mitsubishi Electric in PV Packs - Photovoltaic installations by MCS - Accredited installers, we can supply this kwH meter in 1 to 1000's, for larger quantities please ask for best prices.

Current Range: 10-100A, 20-100A
Voltage Range: 210-250V, 105-127V
Frequency: 50 or 60Hz
System Connection: 1 phase, 2 wire
Insulation: 4kV RMS 50Hz
Impulse Withstand: 12kV 1.2/50ms 40ohm source
Certified Product Life: 20 years (OFGEM model)
Temperature: -20C to +55C (Op range), -25C to +85C (Storage)
Pulse Output: 100ms pulse 100p/kWh (=10Wh/pulse)
Specifications kWh Class 1 or 2 EN 62053-21:2003
kvarh Class 2 or Class 3 EN 62053-23
Case IP53 to IEC 60529:1989

If you require any further information on the Elster A100C please see the pdf: