SEAWARD Primetest 250 PAT Tester

The new Primetest 250 PAT tester will perform all tests required to comply with the IEE Code of Practice. These include RCD trip testing, protective conductor current and touch current testing. The Seaward Primetest 250 also carries out Insulation Testing at either 250V or 500V DC. The Seaward Prime test 250 is battery powered and can be plugged into the mains supply to run the protective conductor current and touch current tests.

As innovators within PAT, Seaward have also enabled the Seaward Primetest 250 to carry out full testing on 3-phase equipment found in factories, workshops, schools and colleges. The PT250 is the only tester on the current market that will test for Differential Leakage Current on 3-phase equipment using an optional Seaward 3-phase adaptor.

The battery powered Primetest 250 PAT tester is very easy to use with auto sequence test buttons and a large display with clear PASS/FAIL indication. This makes it an ideal choice of PAT tester for both novices to PAT testing or experienced test engineers who need to test a wide range of electrical equipment while fully complying the IEE guidelines. The Seaward Prmetest 250 is the next step in their already highly successful range of battery powered Primetest PAT testers, packing it with loads of features which will aid Electrical Safety within the workplace and help companies fully comply.

Seaward Primetest 250 Main Features:
►   Fully complies with the IEE Code of Practice
►   RCD Trip Time Testing
►   Battery driven for mains free testing
►   Tests IEC leads including polarity check
►   Automatic Test Sequences
►   Hand held and Lightweight Appliance Safety Tester
►   Selectable 250V or 500V Insulation Test.
►   3-Phase Equipment testing (using optional adaptor)
►   Carries out Protective Conductor/Touch Current (using mains supply)
 
 

► Seaward Primetest 250 PAT Tester
► Deluxe semi rigid carry case with zipped pouches
► Mains lead with 13A UK Plug for mains powered tests
► 230V Extension Lead Adaptor
► Test Lead with crocodile clip and mains lead
► Instruction manual
► 6 x AA Batteries
► FREE Roll of 500 Pass Labels
► FREE Roll of 200 Fail Labels
► FREE 100 PermaTAG Tough Cable Labels worth £39.00
► TEST-METER EXCLUSIVE: FREE PAT Testing Frequency & Test Limit Reference Guide
► 12 months manufacturers warranty

Earth continuity
► Output Current: 200mA
► Test Voltage (o/c): 9V DC nominal
► Test Duration (Class I Test): 2s nominal
► Display Range: 0.01 ohm to 19.99 ohm
► Pass Value (Class I Test): 0.2O
Insulation resistance
► Test Voltage: 250/500VDC @1mA nominal, < 2mA (s/c)
► Test Duration (Class I or II): 2s
► Display Range: 0.01 Mohm to 19.99 Mohm
► Pass Value: 1.0 MO Class I
► 2.0 MO Class II
Equivalent leakage
► Test Voltage: 40V Nominal AC 50Hz Open Circuit
► Test Duration: 2s – 30s nominal
► Display Range: 0.1 mA to 19.99mA
► Pass Value: 0.75mA CLI / 0.25mA CL II
IEC lead test
► Test voltage: 5V DC nominal
► Test Duration: Time for test (2s max)
► Test: Live / Neutral Checks for o/c, s/c and crossed
Protective Conductor Current
► Test Voltage: Supply Voltage, max current 13A
► Test Duration: 30s maximum
► Display Range: 0.15 mA to 9.99 mA
► Pass Value: 0.75mA/3.5mA (user selectable with 0.75mA as default)
Touch current
► Test Voltage: Supply Voltage, max current 13A
► Test Duration: 30s maximum
► Display Range: 0.10 mA to 5.00 mA
► Pass Value: 0.25mA
3 phase differential leakage current
***Requires 3 phase adaptor accessory ***
► Test Voltage: 3 phase supply voltage
► Test Duration: continuous measurement
► Display Range: 0.10 mA to 9.99 mA
► Pass Value: 3.5mA
RCD trip time
► Test Voltage: Mains supply voltage
► Test Current: 10mA / 30mA rms sinusoidal
► Test Current Phase: 0°/180° auto switched on alternate tests
► Measuring Range: 0ms – 500ms
► Pass Value: 200ms
Power socket check
► Input voltage range: 225 – 254V AC max current 13A UK
► Indicates configuration of voltage potential: 
    Line potential phase to earth
    Line potential phase to neutral
    Line potential neutral to earth