Transmille 6080 PAT Tester

The Transmille 6080 PAT Tester is part of the powered PAT tester range from Transmille which are the only Battery Powered PAT Testers on the market with a 10 and 25A Earth Bond Continuity Test. The IET recommends that appliances should be tested to 1,5 times its fuse rating.
The Transmille PAT Testers are currently the only battery powered PAT testers on the market that can accommodate that recommendation. The Transmille 6080 and 6080 Plus are also currently the only Dual Voltage Battery Powered PAT Testers available.

The Transmille 6080 is a downloadable PAT Tester. Up to 1000 test results can be stored on the Transmille 6080 PAT, and then downloaded onto the optional Transmille DSR PAT Software with a unique identifier number and date.

Lead lengths are easily adjustable with a length slide button that will take the resistance within the lead into account. A unique timesaving function. Unlike the Transmille 5080, the 6080 has a seperate Extension and IEC Lead Test. Simply connect your lead to the tester and Press the IEC button. The Transmille 6080 will then run an Earth bond test, Insluation test and a polarity test on the lead.
Pass and Fail results are clearly displayed on a red/green LED bar making it very easy to interpret your PAT Test result using the Transmille 6080. The self check function allows the 6080 Plus to be verified using its own built in test facility - simply connect to the self check outputs to confirm correct PAT operation. Another unique function.

The Transmille 6080 PAT series can perform these following tests: Earth Bond Continuity on 25A, 10A and 100mA (for IT equipment), Insulation Test, Earth Leakage Test, Polarity Test and a Fuse Test. This is a modern tester designed for professionals wanting to save time and move faster between tests.
When you purchase the Transmille 5080 PAT Tester from test-meter.co.uk you will receive 500 Pass and 200 Fail PAT Labels worth £29, free of charge.

►   Transmille 6080 Portable Appliance Tester  
►   Removable earth bond lead
►   Power charger 
►   Instruction manual
►   12 months manufacturers warranty
►   Roll of 500 Pass Labels FREE worth £19
►   Roll of 200 Fail Labels FREE worth £10

►   Earth Bond Continuity @ 100mA, 10A, 25A, Range 0 to 10 Ohms
►   Insulation Testing @ 500V DC, Range 0.1-100 Mohms
►   Leakage Current @ 0.1mA to 15mA @ 240V / 50Hz
►   Fuse Test:  Pass / Fail: Checks power switch on & fuse OK using 230V. 
►   Polarity Test: Checking internal wiring on IEC/Extension Leads
►   Self Check: Earth Bond @ 0.4 Ohms
►   Self Check: Insulation Resistance @ 7MOhms
►   Self Check: Leakage Current @ 1mA
►   Lead Length Correction Slider control 1 to 5m
►   Battery life:  Typical 500 tests before recharging (mains operation possible) 
►   Recharge time: 6 Hours
►   Memory Capacity: 1000 Tests (unlimited with PC based storage)
►   Weight & Dimensions 3,9 kg, 390 x 280 x 110mm