Metrel BetaPAT Plus MI3304 PAT Tester

The Metrel BetaPAT MI3304 Plus PAT Tester is the latest addtion to Metrel's PAT tester range. It has taken all the functions of the BetaPAT MI2141 and made it better and more fitting today's marked and technology.
The BetaPAT Plus is a Dual Voltage PAT Tester suitable for periodic testing, troubleshooting or as a tool for electrical safety in workshops. The tester can operate on both 230V and 110V supply voltage and is enclosed and well protected in a robust and waterproof case.

The tester itself has taken speed and ease of use into consideration, and has over 100 pre-programmed Auto Tests built into the tester. These test sequences will cover almost any type of appliance you will be testing, and it makes PAT testing a lot easier and quicker. Should you require any other Auto Test sequences, the user can programme and store up to 50 additional Auto Tests on the Metrel BetaPAT Plus.

The tester is equipped with a QWERTY keyboard for rapid data entry. Test results and PAT data is stored on the tester (the BetaPAT Plus MI3304 stores up to 6800 results) and can then be downloaded onto the Pat Link Pro Software using a USB or RS232 download lead. Download leads and basic software comes supplied with the tester. Time spent on hand written PAT certificates is no longer necessary.

Using the optional PATLink Pro Plus Software enables viewing and advanced analysing of PAT results (comparison/trends for selected appliances). Test reports can be compiled and printed off, and results can even be uploaded back onto the BetaPAT Plus MI3304 when re-testing appliances. This means that you would not need to re-type any information into the PAT tester when re-testing an old appliance. When memory has been uploaded back onto the tester you can recall that information by using either the QWERY keyboard or the optional Barcode Scanner and simply press "Start" to carry out the testing again. This rapidly speeds up the testing proceedure when testing the same appliances more than once.

The Metrel Beta PAT Plus Tester can test the trip-out time of portable RCD's and measure True RMS and Load Current using the optional Clamp Current Adaptor. These features are exclusive to the new versions of the BetaPAT and OmegaPAT Tester from Metrel

You can connect the BetaPAT Plus MI3304 to a printer for printing out barcode labels on-site. These can be used in conjunction with the optional Barcode Scanner. The printer can mounted to the PAT tester using a metal holder delivered with the Metrel printer. For big savings on these items, the Metrel BetaPAT Plus Kits would be recommended. Please call 0113 248 9966 to hear more about our PAT Kits.

The Metrel BetaPAT PLUS complies with all current standards such as IEC 60335-1, IEC 60598-1, IEC 60745, IEC 60950, VDE 701 T1, VDE 702 T2 and BS 89. The long term reliability of this PAT tester is guaranteed by Metrel's 3 year warranty.

This BetaPAT Plus PAT Tester is ideal for anyone who needs a fully comprehensive downloadable PAT Tester that has efficiency and speed of testing as a priority.

►   Metrel/Alphatek BetaPAT PLUS MI3304 PAT Tester
►   Metrel PATLink Pro Software
►   Removable Earth Bond Lead
►   PRCD Test Probe
►   USB Download Lead
►   RS232 Download Lead
►   Instruction Manual
►   Manufacturers Calibration Certificate
►   3 Year Manufacturers Warranty
►   500 Pass Labels and 200 Fail Labels (worth £29)
►   FREE 100 PermaTAG Tough Cable Labels worth £39.00
 

Earth Bond Continuity
► Currents: 100mA DC, 4A, 10A or 25A AC
► Measuring Range: 0.00-19.9 ohms
Insulation Test
► Voltage:  250V or 500V DC
► Measuring Range: 0.000 - 199.9 Mohms
Substitute Leakage
► Voltage: 40V
► Measuring range: 0.00- 1.99 mA
Touch Leakage
► Measuring range: 0.00- 19.99 mA  
Differential Leakage
► Measuring range: 0.00- 19.99 mA
Load Test
► Measuring range: 0 - 4 kVA
Polarity
► Output Voltage: 40V
► Faults: open, short, crossed, multiple fault
Portable RCD
► Trip-out time readout: 0 ms - 1999 ms (½xI∆N) ±3 ms
► Test currents: (I∆N)10 mA, 15 mA, 30 mA 0 ms - 300 ms (I∆N) ±3 ms
► Test current multipliers ½,1, 2 and 5xI∆N 0 ms - 150 ms (2xI∆N) ±3 ms
► Test modes: single, autotest 0 ms - 40 ms (5xI∆N) ±3 ms
Trip out times
► ½xI∆N: t∆ > 300ms
► 1xI∆N: t∆ < 300ms
► 5xI∆N: t∆ <40ms

► Dimensions: 335 x 160 x 335mm
► Weight: 8.4kg