Chauvin Arnoux CA 8230 Power and Quality Analyser

The Chauvin Arnoux CA 8230 Single Phase Power and Quality Analyser is designed to measure and carry out diagnostic and power quality work on single-phase and balanced three-phase networks. Waveforms can be obtained instantly and monitored over a period of time while the multi-tasking measurement system of the CA 8230 can simultaneously handle all the measurement functions as these waveforms are displayed. The Chauvin Arnoux CA8230 provides all measurements needed for a comprehensive diagnostic of power and energy in an electrical installation. The CA8230 power quality meter allows the user to measure and qualify electrical network harmonics and has an inrush mode for starter currents that shows a detailed waveform during the first few seconds of powering up. Direct access buttons allow simple operation of the Chauvin Arnoux 8230 power analyser's various functions and the unit will automatically recognise the type of sensor it is connected to.

The 8230 power quality tester measures TRMS voltage and TRMS current from the real effective display of AC/DC at the ½period to peak values. It also measures overall harmonic rates and a short term Flicker measurement is available. The C.A. 8230 enables the various harmonic values to be measured up to order 50 RMS value with the expert mode allowing harmonic direction to be determined. This Chauvin Arnoux power analyser has a recording period of all values over a period of up to several days.

CA 8230 Power Quality Analyser features
► Intuitive to use
► Measures very weak and very strong currents
► Analysis of energy quality
► Analysis of phase shift
► Energy balance
► Displays Min/Max Volts, Amps, Crest Factor, Peak value and K-Factor
► Calculates Watts, VARs, kWh, VA, power factor & displacement power factor
► Displays total harmonic distortion for voltage and current.
► Displays and records up to 17 different power quality parameters
► Captures, displays & stores INRUSH current waveforms
► Simultaneous access to all measurement modes
► Stores up to 8 screen captures.
► Large VGA colour LCD screen

Please note the Chauvin Arnoux QualiSTAR 8334B is supplied at this price without clamps. To order this device with clamps please choose from the list below and call test-meter on 0113 248 9966 to order or for more information.

► CA 8230 with MN93A (P01160631): £1070
Supplied with MN93A 120A Low Current Clamps with 20mm jaw size.
► CA 8230 with AmpFLEX (P01160632): £1060
Supplied with A193 flexible current clamps: 10 to 6500Aac (10Hz to 20kHz) 450mm long and flexible.

► Chauvin Arnoux C.A. 8230 Power Analyser
► Chauvin Arnoux CA8230 carry case
► 2 x banana leads
► 2 x 4mm test probes
► 2 x crocodile clips
► 6 x 1.2V rechargeable batteries
► 230V mains adaptor
► USB cable
► Power Analyser Transfer software
► Operating manual on CD

► Sampling: 256 samples per cycle
► Voltage (TRMS): 660V AC/DC (phase-phase), 600V AC/DC (phase-neutral)
► Frequency: 40 - 70Hz
► Measurements: kW, kVAR, PF, DPF, kWh, kVARh, kVAh, K-Factor
► Flicker, Harmonic, Phase shift, Phase rotation, INRUSH.
► Harmonics: THD-R, THD-F, V, A, VA upto 50th order with direction & sequence
► Alarms: Stores up to 2096 events
► Data storage: 1.5MB partitioned for waveforms, alarms and trend recording
► Power supply: Rechargeable NiMH batteries
► Compliance: IEC 61010 CAT III 600V
► Dimensions: 211 x 108 x 60mm
► Weight: 880g