MEGGER MST210 Socket Tester

The Megger MST210 socket tester is a plug-in style tester designed to identify wiring faults on UK BS1363 13A 3-pin power sockets.

With Over 17 combinations of wiring fault that can be identified including missing wires and incorrect or reversed connections. Faults are signalled by 3 bright LEDs on the front of the unit,with a simple diagnosis chart for typical errors included on the label next to the LEDs, 2 green LED’s signal a correctly wired socket, and a third red LED identifies a fault. If either green LED fails to light, or the red LED comes on, a fault is present and will require further investigation.

The Megger MST210 can be used for initial identification of socket faults following socket replacement or re-wire work of any kind. Simple miss-wires or missing connections can be quickly identified prior to full BS7671 electrical test and inspection, so saving time during the testing and certifi-cation process.The Megger MST210 may also be used during installation or commissioning of electrical equipment connected to 13A sockets (such as white goods) if a wiring fault is suspected.

The Megger MST210 Socket Tester is a convenient, compact plug-in style tester designed to identify wiring faults at UK 13A 3-pin power sockets. Over 17 combinations of wiring fault can be identified including missing wires and incorrect or reversed connections.Faults are signalled by 3 bright LED’s on the front of the unit, with a simple diagnosis chart for typical errors included on the label next to the LED’s. 2 green LED’s signal a correctly wired socket, and a third red LED identifies a fault.If either green LED fails to light, or the red LED comes on, a fault is present and will require further investigation.

Megger MST210 UK socket tester fetures:
► Simple and effective identification of faulty wiring at sockets
► Easy to use
► 2 green and 1 red LED’s for instant error reporting and fault diagnosis
► Identifies 17 missing wire and wrong connection combinations
► Rugged and reliable

Indicators: Bright              LED 2 Green; 1 Red
Supply Rating:                 230 V AC 50/60Hz single phase
Operating Temperature:     0°C to +40°C
Humidity:                          0 to +40°C <95%Rh
Safety rating:                    IEC/EN61010-1:2001-02 over voltage Cat III 300V EMC IEC/EN 61326:1998
Dimensions:                     69mm x 67mm x 32mm
Weight:                            80g
Warranty:                         1 year full replacement