Dilog DLPK1 Proving Unit Kit with a Combivolt 1

This Dilog DLPK1 Safety Kit contains a Combivolt 1 Voltage tester and a PU260 proving unit in a carry case. The PU260 battery powered proving unit produces 690 Volts DC to enable contact type voltage indicators to checked. The Di-Log Combivolt 1 Voltage and Continuity tester can detect AC and DC voltages upto 690V AC and DC as well as all the features below:

CombiVolt 1 Features:

►  Testing voltages from 12 to 690V AC and DC
►  Automatic switching between voltage and continuity
►  Continuity testing with audible and visual indications
►  Three Phase Rotation Test
►  Single pole voltage indication up to or equal to 100V AC
►  Fully compliant with GS38 including probe tips
►  24 month warranty

Proving Unit Features:

►  Portable, battery powered Proving Unit for testing two pole Voltage testers up to 690 V
►  Continuity tester for proving your: test leads, fuses, fused test leads etc
►  Additional touch electrode for quick testing of fused leads
►  Optical and acousticle continuity indication
►  Low battery indication
►  Protective rubber holster
►  Supplied with batteries

Di-Log Combivolt 1 Voltage & Contuinuity Tester
Di-Log PU260 Voltage tester proving unit
Qty 10 AA batteries 1.5V
Di-Log Combivolt 1 Instruction manual
Di-log PU260 Instruction manual
CCPROKIT carry case

Voltage
Voltage Display : 12-690 V AC/DC 
LED resolution : 12, 24, 50, 120, 230, 400, 690V
Voltage detection: Automatic
Acoustic signal: AC voltage - DC voltage
Polarity Detection: Full range
Response Time: LED less than 0.1 secs
Frequency Range: 0 to 400 Hz
Operation time: 30 secs
Recovery Time: 10 mins
Auto powering on: Less than 12V AC/DC

Single Pole Voltage Indication
Voltage Range: 100-690 V AC
Frequency Range: 50-400Hz

Continuity
Continuity Measuring Range : 0-400Kohm

Phase Rotation Test
Voltage range : 100 to 690 V
Frequency: 45-65 Hz
Over voltage protection : 690 V AC/DC
Power supply : 2 x AAA (LR03) Batteries

CombiVolt 1 Dimensions and weight
255 x 70 x 28mm     210g

Proving Unit Output Voltage: 690V DC dependant on the load applied by the voltage indicator 

Proving Unit Dimensions and weight
Proving Unit Dimensions: 220mm H x 110mm W  x 40 mm D approx.

Warning
The Dilog PU260 Proving unit puts out a hazardous voltage and must only be used by a qualified person and in accordance with the manufacturers instruction supplied with the unit.