Megger TPT220 Two Pole Voltage Detector

The new Megger TPT220 Two Pole Voltage Detector provides electricians and electrical engineers with safe and convenient voltage indication. The TPT220 voltage indicator also offers continuity testing, RCD function checking and 2 pole phase sequence indication. The Megger TPT 220 also offers an LCD display so that a numerical test result value can be shown. The display of this voltage tester has a back light with an ambient light sensor that will illuminate the screen in poorly lit conditions. Although primarily used for testing in electrical installations the TPT220 can be utilised for testing auto electrical, fire alarm systems and telecom.

The TPT220 has a dual coloured LED display that provides AC and DC voltage measurement from 6 volts to 1000 volts in eight steps, with any voltage measurements greater than 35V being accompanied by an acoustic sounder. Additionally the Megger TPT220 voltage tester has an RCD/FI test function that allows for the simple testing of 30mA RCDs, RCBOs and safety breakers. A test between phase and earth on a circuit protected by an RCD, RCBO or safety breaker will not trip these devices. Compared with many other types of two-pole tester, the phase sequence indication feature has been simplified so that the test probes are not required to cross. Audible continuity/resistance testing ranges from 0 to 2kΩ.

With safety in mind the TPT220 voltage detector is CAT IV 1000V rated with an IP65 rated body. The detector has a built-in safety feature to warn users of dangerous voltages even if the batteries are exhausted. The GS38 tips are also provided with protective shrouds.

Megger TPT220 Two Pole Voltage Detector features
► AC and DC voltage indication from 6V - 1000V
► Continuity/Resistance up to 2kΩ (acoustically)
► RCD function test
► Two pole phase sequence indication
► LCD display
► Built in torch
► Exhausted battery warning indicator
► Spare GS38 tips included
► On/Off switch
► Auto power off
► CAT IV 1000V rating

► Megger TPT 220 Two-Pole Voltage Detector
► 4 x GS38 tips

► Display: Optical 3 1/2 digit, LCD
► Operating panel: RCD button, On/Off button, D-Hold button
► Voltage: 6 - 1000V AC/DC
► Accuracy: 1.5% ±3 digits
► Frequency: 40 - 400Hz
► Continuity: 0 – 2000Ω
► Accuracy: 5% ±5 digits
► Phase indication: >100V AC
► Switchable load: Is <0.3 A ED (DT) = 30 sec.
► Operating frequency: 0 – 400Hz
► Torch: Ultra bright LED
► Power Supply: 2 x 1.5V batteries type AAA LR03
► Operating temperature: -10°C to 55°C
► Humidity: 96% Rh
► Ingress protection: IP65
► Safety: CAT IV 1000V
► Compliance: TÜV, GS IEC/EN 61243-3 (DIN VDE 0628-401)
► Dimensions: 70 x 238 x 30mm
► Weight: 200g