Chauvin-Arnoux-Promotion

Chauvin Arnoux Qualistar Power Quality Analysers are now available with free power quality clamps and data analysis software from Test-Meter. The range - consisting of the Chauvin Arnoux CA8331, CA8333, CA8336 and CA8435 - includes both three- and four-channel instruments and each model provides sophisticated analysis that allows the user to map consumption, detect faults and improve efficiency.

Chauvin Arnoux CA8331 & CA8333 Power Quality Analysers

The CA8331 and CA8333 Qualistar Analysers are both three-channel models that provide the user with detailed information on electricity usage which is particularly useful for spotting inefficiencies and malfunctioning systems. They both measure frequency, power, energy, harmonics (up to 50) and current whilst the higher-spec CA8333 has specific functions such as transient mode and Inrush current mode for system start up phases.

They are now both available with three free Chauvin Arnoux A193-450 current clamps that are capable of measuring current from 100mA to 10kA AC. The clamps have a 450mm flexible coil that can be fed around conductors in the tight spaces that are often associated with energy monitoring. A total clamping diameter of 140mm and a safety rating of Cat III 1000V and Cat IV 600V make them extremely practical.

Chauvin Arnoux CA8336 & CA8435 Power Quality Analysers

Both Chauvin Arnoux Qualistar four-channel analysers - the CA8336 and CA8435 - are suitable for snapshot capture or long-term monitoring and feature advanced measuring functions such as peak detection and simultaneous capture of parameters, transients, alarms, and waveforms. The Chauvin Arnoux CA8435 shares the powerful analysis capabilities of the CA8336 and is specifically designed for outdoor use with an ingress protection rating of IP67, making it both waterproof and dust-proof.

Both of these analysers are currently supplied with a free set of four A193-450 clamps in addition to Chauvin Arnoux DataView. This software package enables remote configuration of the analyser and execution of measurement processes in addition to real-time viewing of data from the analyser. It is also possible to create standardised and customised reports and export data in Excel so that information from the Qualistar analyser can be distributed and used.

Great Savings!

Normally a set of three A193-450 clamps bought alongside a Qualistar analyser would cost £428 whilst DataView software and four clamps would set you back nearly £800 so all four analysers are available with huge savings. With sophisticated analysis, powerful measurement and great free gifts, there has never been a better time to buy a Chauvin Arnoux Qualistar Power Quality Analyser!