Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

C.Scope YIRRFT80 80m Flexible Pipe Tracer

C-Scope
SKU: CSCOYIRRFT80
  • 80m tracing rod suitable for pre-excavation tracing and pipe inspections
  • Suitable for non-metallic pipes, ducts, sewers and drains
  • Energised with 33kHz frequency signal through C.Scope Signal Generator
More Info
Typically ships in 5-7 working days

C.Scope YIRRFT80 80m Flexible Pipe Tracer

The C.Scope YIRRFT80 80m Flexible Pipe Tracer is a flexible cable which has been designed for line and end tracing on thin, non-metallic ducts, pipes, sewers and drains. The ability to perform both line and end tracing is very useful as it allows pre-excavation inspections in addition to finding blockages or obstacles within the pipe itself. The 5mm diameter is suitable even for the thinnest pipes and the 10cm bend radius means it can be used on intricate systems.

The integral copper wires in the C.Scope YIRRFT80 are optimised for transmitting a 33kHz signal as supplied by a C.Scope Signal Generator/Transmitter. The tracer can be energised along its entire length for line tracing or solely at the end where a tiny integrated sonde can emit a stronger signal that penetrates up to 4m. This can be used for finding obstructions in plastic pipes and also permits depth measurement with suitable locators.

Several practical features make the C.Scope YIRRFT80 easy to use. It has a solid steel frame which turns on its axel to unravel the tracing rod as well as a slip ring on the axel which allows the Signal Generator to stay attached to the tracer whilst it is being fed into an underground conduit. The tracer rod and tip have sturdy fibreglass cladding with an IP rating of 68 to withstand challenging conditions in any pipe or duct system.

C.Scope part number: YIRRFT80

Key Features

  • Tracing rod length: 80m
  • Optimised signal frequency: 33kHz
  • Signal penetration: 4m at tip, 3m along line
  • Rod diameter: 5mm
  • Tip sonde diameter: 7.5mm
  • Min. rod bend radius: 10m
  • Slip ring keeps generator attached to tracer
  • IP68-rated fibreglass cladding
  • Integrated sonde at tip
Specification
  • Part No.: YIRRFT-80
  • Frequency: Optimised for 32,768Hz
  • Detection Depth Range: Line Detection - 3 m (10 foot) dependent upon Locator and Signal Generator type and site conditions; Tip Detection - 4 m (13 foot) dependent upon Locator and Signal Generator type and site conditions 
  • Compatibility: Any Signal Generator or Transmitter with 33kHz or 33/131kHz combined output 
  • Rod Length: 80m (260’)
  • Rod Diameter: 5mm nominal (0.2”)
  • Rod Material: Quality sleeved fibreglass rod with three integral copper wires 
  • Rod Minimum Bend Radius: 10 cm (3.9”) reducing to 15 cm (5.9”), 5 cm (1.9”) from Tip 
  • Rod Wire Diameter: 0.45mm each wire (0.018”)
  • Transmitting Sonde Diameter: 1.5mm max (0.3”)
  • Rigid Tip Length: 20mm max. (0.8”)
  • Tip Material: Brass
  • Frame Size: 58.8 x 28.8 x 48.5 cm (1’11” x 11.3” x 1’7”) 
  • Frame Material: Powder coated 16 mm steel tube (0.6”) 
  • Reel Diameter: 48cm (1’7”)
  • Weight: 1.5kg (16lb 8.5oz)
  • Slip ring assembly: Sealed multi-wire duplexed
  • Operational temperature range: -20˚C to 50˚C (-4˚F to 122˚F)
  • Storage temperature range: -20˚C to 50˚C (-4˚F to 122˚F)
  • Tracer rod and tip IP rating: 68
  • Casing IP rating: 54
  • IP rating for Terminal Box: 66
Label Type Size Download
pdf C.Scope Accessory Datasheet pdf 4.2 MB Download