NHS & School Discounts Available: Please call for more information.

FLIR CM275 Thermal Imaging Clamp Meter

Be the first to review this product

  • Thermal imaging capability helps spot overheating components in circuitry
  • Measure AC/DC current, AC/DC voltage, resistance and capacitance
  • Save images and readings to internal memory with wireless data transfer

rrp £655.00

now £638.00 (Ex. VAT) £765.60 (Inc. VAT)

rrp £655.00

Please select a free gift below.

  • Description

    FLIR CM275 Thermal Imaging Clamp Meter

    The FLIR CM275 Thermal Imaging Clamp Meter combines accurate measurement of electrical parameters with FLIR’s state-of-the-art thermal imaging technology. It can measure AC/DC current up to 600A via its 35mm jaw whilst the meter can also perform contact measurement of voltage (1000V), resistance (6kΩ), and capacitance (1000µF). Other functions include diode testing and inrush current measurement for assessing the start-up phases of motors. VFD mode is perfect for motor drives and true RMS measurement makes AC parameters more accurate.

    In addition to its advanced measurement functions, the FLIR CM275 has a 160 x 120 pixel thermal sensor which measures surface temperature from -10˚C to 150˚C with ±3˚C or 3% accuracy. The 150mK thermal sensitivity means that temperature differences of just 0.15˚C can be depicted on screen across a 50˚ x 38˚ field of view. A laser pointer helps the user direct the camera and there is the choice of iron, rainbow and greyscale palettes. These thermal capabilities highlight overheated components that may indicate other problems within the system.

    It is easy to select the function on the FLIR CM275 using the simple dial. Other buttons allow ranging, fine adjustments and different measuring modes such as min/max recording and data hold. Results and thermal images are shown on the 2.4” screen and both readings and images can be saved to clamp meter’s internal memory. Files can then be wirelessly transferred via Bluetooth® to the user’s smartphone using the FLIR Tools or FLIR InSite apps.

    The practical design of the FLIR CM275 makes it suitable for working in tricky or cramped conditions. The integrated torch illuminates the area in dark cabinets and the slimline clamp jaws can fit into awkward cavities. It is drop tested to 2m and is safety rated as Cat III 1000V / Cat IV 600V. The clamp meter benefits from a ten-year manufacturer’s warranty.

    FLIR part number: CM275

    Key Features

    • Combination thermal imager and clamp meter
    • AC/DC current range: 0 to 600A
    • AC/DC voltage range: 0 to 1000V
    • Resistance range: 0 to 6kΩ
    • Capacitance range: 0 to 1000µF
    • Diode test
    • Inrush, LoZ, VD, true RMS
    • Thermal resolution: 160 x 120 pixels
    • Temperature range: -10˚C to 150˚C
    • Thermal sensitivity: 150mK
    • Temperature accuracy: ±3˚C or 3%
    • Field of view: 50˚ x 38˚
    • Memory for images and readings
    • Wireless data transfer to smartphone
    • 2.4” colour screen
    • 10-year warranty
  • Specification

    Thermal Imaging

    • IR Resolution: 160 x 120 (19,200 pixels)
    • Thermal Imaging Detector: FLIR Lepton® microbolometer
    • Temperature Sensitivity: 150 mK
    • Emissivity Settings: 4 Presets with custom adjustment
    • Temperature Accuracy: ±3°C or 3%
    • Temperature Range: -10°C to 150°C (14°F to 302°F)
    • Field of View: 50.0° x 38°
    • Laser Pointer: Yes
    • Focus: Fixed
    • Thermal Imaging Palettes: Iron, Rainbow, Grayscale

    Measurements

    • True RMS: Yes 
    • Auto-ranging: Yes, with manual range option
    • AC / DC Volts: 1000 V 
    • Accuracy: ±1.0%
    • VFD AC Volts: 1000 V 
    • Accuracy: ±1.0%
    • AC / DC LoZ V: 1000 V
    • Accuracy: ±1.0%
    • AC / DC Amps: 600.0 A
    • Accuracy: ±2.0%
    • VFD AC Amps: 600.0 A
    • Accuracy: ±2.0%
    • AC Inrush: 600.0 A
    • Accuracy: ±3.0%
    • Resistance: 6.000 kΩ 
    • Accuracy: ±1.0%
    • Capacitance: 1000 μF
    • Accuracy: ±1.0%
    • Diode Test: 1.5 V
    • Accuracy: ±1.5%
    • Flex Input AC A: 3000 A
    • Accuracy: ±1.0%
    • Flex Input Frequency Counter: 10.00 kHz
    • Accuracy: ±0.1%

    Additional Measurements

    • Continuity Check: 30 Ω
    • Measuring Rate: 3 samples per second
    • Min/Max: Yes


    General Information

    • Connectivity: Bluetooth®
    • Data Logging & Storage: 10 sets of 40K scalar measurements, 100 images
    • Jaw Opening: 35mm
    • Auto Power Off: Yes
    • Worklights: Yes
    • Display Size: 2.4”
    • Battery: 3 x AA batteries
    • Drop Test: 10m
    • Safety Category Rating: CAT III-1000V, CAT IV-600V
    • Size (H x W x L): 48.5 x 97 x 255 mm (1.9 x 3.8 x 10 in)
    • Weight: 460 g (16 oz)
    • Warranty: 10 yrs on product and detector
  • Supplied Accessories

    • FLIR CM275 Thermal Imaging Clamp Meter
    • 3 x AA batteries
    • Premium Cat IV silicone test leads
    • Quick start guide
    • Instruction manual for FLIR CM275
  • Product Questions

    Please Sign in or Create an account to post a question.

    There are no entries.

  • Reviews

    There are currently no reviews for this product. If you have previously purchased it please leave a review using our quick and easy form to the right.

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

  • Delivery Information

    At Test-Meter.co.uk we understand the importance of a reliable delivery service when shopping online. Especially when the goods are often essential to your working day. If your goods are required by a certain date please feel free to contact us for an honest and realistic indication whether this can be met. We aim to process all orders we receive within 1 to 3 working days, however from time to time we do have an increased demand for certain products or there might be delays from the manufacturer. In such cases delivery of your equipment may be subject to a minor delay.

    We use DPD/Interlink for all larger items and Royal Mail for smaller items and accessories. With DPD/Interlink you will receive a 1 hour delivery window on the day of delivery via e-mail/text and a notification 15 minutes before arrival so you will not have to wait around all day. You can even manage your booking online and re-arrange delivery for another date or arrange the goods to be left with a neighbour of your choice.

    We also offer delivery options for goods required urgently on certain products, all which are sent by DPD/Interlink.

    Our charges for UK deliveries:

    • FREE Delivery (on select products only): typically 3-5 working days*
    • Standard Delivery at £4.95: 2-3 working days
    • Next Working Day Delivery (on select products only) at £7.50
    • Pre-Noon Next Working Day Delivery (on select products only) at £9.50*
    • Pre-10.30am Next Working Day Delivery (on select products only) at £18.50*
    • Saturday Pre-Noon Delivery (on select products only) at £14.50*
    • Sunday Pre-Noon Delivery (on select products only) at £14.50*

    *UK mainland only

    NOTE! For next working day or Saturday/Sunday delivery options the order MUST be placed no later than 3pm on the working day before delivery is required. After 3pm, please arrange with our staff before selecting a priority delivery service. Priority services are available to UK mainland residents only (this might exclude certain areas in the north of Scotland).

    Customers outside the UK:

    Test-Meter.co.uk exports to many countries all over the world. Prices for shipping vary on location and weight/dimensions. Costs are calculated for certain countries at the checkout. If your country is not included in this list please e-mail admin@test-meter.co.uk with your name, address and the items you would like to order for an accurate shipping quote or go to http://www.test-meter.co.uk/test-equipment-export for more information.

    For more information on delivery, please see our terms and conditions.