Fluke i30 AC/DC Current Clamp

SKU: FLUKEI30
  • Measures AC current up to 20A and DC current up to 30A
  • 19mm trigger-operated jaw clamp can fit into cramped spaces
  • Accuracy of ±1% and resolution of 1mA
More Info
Typically ships in 5-7 working days

"Buy a Fluke, get a FREE Fluke" promotion. Spend £150 or more on any qualified Fluke product(s) and claim a FREE Fluke gift!
[Click here to learn more] Offer is valid from 1st March to 31st August 2024.

Fluke i30 AC/DC Current Clamp

The Fluke i30 AC/DC Current Clamp can measure DC current between 30mA to 30A and AC current between 30mA to 20A. It takes readings through a 19mm jaw clamp and plugs into testers through a standard 4mm shrouded banana plug so it is compatible with a wide range of other instruments. Values are accurate to ±1% and the clamp has a resolution of 1mA. the user can adjust the zero function using a simple dial.

The clamp is supplied with a 1.5m cable and powered by a 9V battery. The Fluke i30 has a 30-hour battery life and is safety rated as Cat III 300V.

Fluke part number: i30

Key Features

  • DC current range: 30mA to 30A
  • AC current range: 30mA to 20A
  • 19mm jaw clamp
  • Zero function
  • 4mm shrouded banana connection

What's In The Box?

  • Fluke i30 AC/DC Current Clamp
  • 1 x 9V battery
  • Instruction manual for Fluke i30 AC/DC Current Clamp
Specification

Electrical Specifications

  • DC current range: 30 mA to 30 A DC 
  • AC current range: 30 mA to 20 A AC
  • Crest factor: 1.4 in
  • Output sensitivity: 100 mV/A
  • Accuracy: ±1% of reading or ±2 mA
  • Resolution: 1 mA
  • Load impedance: > 10 k Ohms and ≤ 100pF
  • Conductor position sensitivity: ±1% relative to centre reading
  • Frequency range: DC to 20 kHz (-0.5 dB)
  • Temperature coefficient: ±0.01% of reading/°C
  • Power supply: 9 V Alkaline, MN1604/PP3
  • Battery life: 30 hours
  • Working voltage: 300 V AC rms or DC

General Specifications

  • Maximum conductor diameter: 19 mm
  • Output connection: 4 mm safety connector
  • Output zero: Manual adjust via thumbwheel
  • Cable length: 1.5 meters
  • Operating temperature range: 0°C to +50°C
  • Storage temperature range (with battery removed): -20°C to +85°C
  • Operating humidity: 15% to 85% (non-condensing)
  • Weight: 250 g
  • Safety standards: BS EN 61010-1:2001; BS EN 61010-2-032:2002; BS EN 61010-031:2002 300 V rms, Category III, Pollution Degree 2
  • EMC Standards: EN 61326: 1998 +A1, A2, and A3