Fluke i310s AC/DC Current Clamp Probe

SKU: FLUKEi310s
  • Capable of measuring current 300A AC and 450A DC
  • Jaws with an 19mm diameter
  • Utilises Hall effect technology for accurate measurements
More Info
Typically ships in 5-7 working days

"Buy a Fluke, get a FREE Fluke" promotion. Spend £150 or more on any qualified Fluke product(s) and claim a FREE Fluke gift!
[Click here to learn more] Offer is valid from 1st March to 31st August 2024.

Fluke i310s AC/DC Current Clamp Probe

The Fluke i310s AC/DC Current Clamp Probe utilises Hall Effect technology to take precise, non-intrusive measurements of AC and DC currents with a range of 30A to 300A AC and ±45A to 450A DC.

Employing a 19mm jaw clamp, the Fluke i310s Current Clamp Probe is used simultaneously with other recording instruments such as compatible oscilloscopes and multimeters. The output zero offset voltage may be affected by unavoidable environmental factors, however it is easily reset with a simple dial interface.

A 30 hour battery life complete with red warning LED, safety rating of CAT III 300V and a standard 4mm output jack makes the Fluke i310s a particularly practical current clamp probe.

Fluke part number: 2842344

Key Features

  • Capable of measuring current from 30A to 300A AC or ±45A to 450A DC
  • For use with oscilloscopes & digital multimeters
  • Zero Adjustment to reset the output voltage to zero
  • Non-intrusive measurement of AC, DC & complex waveform currents
  • LED warning light indicates battery voltage too low for normal operation
  • Battery life of 30hrs
  • Standard 4mm jack
  • CAT III 300V

What's In The Box?

  • 1 x Fluke i310s AC/DC Current Clamp Probe
  • 1 x 9V Battery
  • 1 x 2m Cable
Specification

Electrical Characteristics

  • Current ranges: 30 A and 300 A AC rms or ±45 A and 450 A DC
  • Measuring ranges: ±45 A and 450 A DC
  • AC rms or DC: ±45 A and 450 A
  • Inrush current: 600A AC rms MAX
  • Output sensitivity: 10 mV/A (30 A)
                                      1 mV/A (300 A)
  • Accuracy (at +23°C): (30 A range) ±1% of reading ±50 m
                                      (300 A range) ±1% of reading ±300 mA
  • Bandwidth to meet accuracy specification: 1 kHz
  • Phase shift below: 1 kHz < 2 degrees
  • Resolution: ±50 mA (30 A)
                       ±100 mA (300 A)
  • Load impedance: > 10 k Ohms and ≤100 pF
  • Conductor position sensitivity: ±1.5% relative to centre reading
  • Frequency range (small signal): DC to 20 kHz (-3 dB)
  • Phase shift below 1 kHz: < 2°
  • Temperature coefficient: ±0.1% of reading / °C
  • Power supply: 9 V Alkaline, MN1604/PP3
  • Battery life: 30 Hours, low battery indicator
  • Working voltage: 300 V AC rms or DC

 General Characteristics

  • Maximum conductor size: 19 mm diameter
  • Output connection: Safety BNC connector
  • Supplied with safety 4mm adaptor
  • Output zero: Manual adjust via thumbwheel
  • Cable length: 2 metres
  • Operating temperature range: -10 to +50°C
  • Storage temperature range (with battery removed): -20 to +85°C
  • Operating humidity: 15% to 85% (non-condensing)
  • Weight: 250 g
Label Type Size Download
pdf Fluke i310s AC/DC Current Clamp Probe Datasheet pdf 190.2 KB Download