Intrinsically Safe Equipment Hire

Our Intrinsically Safe hire fleet consists of smart communicators, pressure calibrators and process calibrators. They are all ATEX-certified for use in dangerous environments where there is a risk of explosion, for example in mining, oil extraction and other industries. Please phone us on 0113 248 9966 for more information or to arrange a hire.
  1. Druck DPI 620 Intrinsically Safe Process Calibrator (Hire Only)

    Features:

    • Measures and sources numerous parameters
    • Provides isolated 24V loop energy supply
    • Includes HART digital configurator
    • Intrinsically safe
    • IP65 weatherproof rating
    • Displays up to 6 readings

    The Druck DPI 620 is an advanced, intrinsically safe instrument designed for use in hazardous areas (ATEX and IECEx) where there is a risk of explosion, for example in the oil and gas industry. It can measure and source multiple parameters including current, voltage (in millivolts and volts), resistance, frequency, pressure and a variety of RTDs and T/Cs. This allows advanced modular calibration of processes and the calibrator also functions as a HART communicator.

    The process calibrator has an IP64 dust and water resistance rating so it is more than capable of standing up to the rigours of regular use in challenging working environments. The vibrant screen can show up to 6 readings simultaneously.

    Part number: HPCA.3

    7 Day Hire
    £125.00+VAT

    Excludes £25+VAT carriage charge each way

    More Info
  2. Emerson HART 475 Smart Communicator (Hire Only)

    Features:

    • Intrinsically safe
    • Sturdy and reliable
    • Hart protocol
    • Fieldbus protocol

    The HART 475 is an excellent instrument for calibrating and commissioning field instrumentation by communicating with transmitters over regular communication lines using both analogue and digital methods with current from 4 to 20mA. The HART and Fieldbus protocols are available with this instrument.

    Part number: HART.4

    7 Day Hire
    £120+VAT

    Excludes £25+VAT carriage charge each way

    More Info
  3. Fluke 707Ex Intrinsically Safe Loop Calibrator (Hire Only)

    Features:

    • Current measurement: 0 to 24mA
    • Current sourcing: 0 to 20mA
    • Current simulation: 0 to 20mA
    • Loop power: 24V
    • DC voltage measurement: 28V
    • Approved for ATEX environemtns

    The Fluke 707Ex is intrinsically safe and therefore safe to use in ATEX environments that carry a risk of explosion. It can source and simulate current up to 20mA as well as measuring current up to 24mA and DC voltage up to 28V. For current measurement, a 24V isolated loop voltage is generated. Advanced features include a push-button 25% step for speedy linearity checks, a ramp function, and a 250Ω loop resistor for use with Hart devices.

    There is a vibrant digital display which shows current source and simulation levels and measurements for the different parameters. Operation is undertaken via the simple dial and push-button interface.

    Part number: HLOP.1

    7 Day Hire
    £35.00+VAT

    Excludes £25+VAT carriage charge each way (collection optional)

    More Info
  4. Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator (Hire Only)

    Features:

    • Simultaneous source and measurement
    • Certified for ATEX environments
    • DC voltage (source): 10V
    • DC voltage (measurement): 30V
    • DC current (source): 24mA
    • DC current (measurement): 24mA
    • DC current (simulate): 24mA
    • Resistance (source): 3200Ω
    • Resistance (measurement): 3200Ω
    • Frequency (source): 10kHz
    • Frequency (measurement): 10kHz

    The ATEX-certified Fluke 725Ex Intrinsically Safe Process Calibrator is an advanced instrument which is safe to use even in hazardous environments where there is a risk of explosion. It sources, simulates and measures DC voltage, DC current, resistance, frequency, temperature and pressure (with optional Fluke-700PEx module) in order to calibrate all manner of process equipment. Sourcing and measurement can be carried out simultaneously with internal loop supply meaning that a separate digital multimeter is not required.

    Step-ramp, slow-ramp and fast-ramp testing are all available in order to ensure accuracy and precision during calibration. The calibrator saves the most frequently-used test settings and is very easy to operate. It offers the ideal solution for calibration of process loops in ATEX hazardous environments.

    Part number: HPCA.2

    7 Day Hire
    £125.00+VAT

    Excludes £25+VAT carriage charge each way (collection optional)

    More Info