NHS & School Discounts Available: Please call for more information.

Keller LEX1 Ei Intrinsically Safe Digital Manometer (400bar)

Be the first to review this product

  • Pressure range of 0 to 400bar, accuracy of ±0.05% FS, and resolution of 20mbar
  • Intrinsically safe with classification of Ex II 2 G and Ex ia IIC T6 Gb
  • IP65 ingress protection rating, battery life of 2000 hours
(Ex. VAT) £590.00 (Inc. VAT) £708.00

Please select a free gift below.

  • Description

    Keller LEX1 Ei Intrinsically Safe Digital Manometer (400bar)

    The Keller LEX1 Ei Intrinsically Safe Digital Manometer has an absolute pressure measurement range of 0 to 400bar with an accuracy of ±0.05% FS and a resolution of 20mbar. It is suitable for specialist applications including calibration and laboratory use and takes measurements via a G ¼” male connector.

    The Keller LEX1 Ei is an intrinsically safe instrument and is therefore safe to use in hazardous environments where there is a risk of combustion. It has an intrinsically safe classification of zone 1: Ex II 2 G and Ex ia IIC T6 Gb and certification files PTB 05 ATEX 2012 X and IECEx PTB 13.0028 X.

    Pressure readings are available in a number of different units on the Keller LEX1 Ei’s clear digital screen. It has a digital calibration function with a zero point and end point whilst the min/max recording feature captures extreme values.

    The Keller LEX1 Ei is capable of communicating with a monitoring network over its RS485 Fischer connection, however a Keller K114A Cable Adaptor is needed for this function. Keller CCS30 software – available for free from the Keller website – can be used to coordinate the system with up to 128 instruments in a Keller-Bus protocol.

    The Keller Lex1 Ei has just two buttons, which makes operation very easy, and also boasts an IP65 rating and a 2000-hour battery life.

    Keller part number: 303030.2004

    Key Features

    • Intrinsically safe
    • Suitable for calibration
    • Suitable for laboratories
    • Range: 0 to 400bar
    • Accuracy: ±0.05% FS
    • Resolution: 20mbar
    • Digital calibration feature
    • Works in wider monitoring system
    • IP65 ingress protection rating
    • 2000-hour battery life
      ECO2 LEO1 LEO2 LEO3 LEO5 LEO Record LEX1
    -1 to 3bar
    -1 to 30bar
    0 to 100bar
    0 to 300bar
    0 to 400bar
    0 to 700bar
    0 to 1000bar
    Accuracy ±0.5% FS ±0.1% FS ±0.1% FS ±0.1% FS ±0.05% FS ±0.1% ±0.05% FS
    Resolution
    (at smallest range)
    10mbar 1mbar 1mbar 1mbar 1mbar 1mbar 0.1mbar
    Temperature range 0˚C to 50˚C
    Temperature accuracy ±1˚C
    Intrinsically safe
    version
    Peak mode
    Pressure connector 7/16" UNF G 1/4" 7/16" UNF G 1/4" G 1/4" G 1/4" G 1/4"
    Analogue output
    Internal memory
    Data port RS485 Binder USB RS485 Fischer RS485 Fischer
    Compatible with
    Keller-Bus protocol
  • Specification

    Intrinsically Safe Categorisation

    • Classification: Zone 1: Ex II 2 G Ex ia IIC T6 Gb
    • Certification files: PTB 05 ATEX 2012 X and IECEx PTB 13.0028 X

    Performance

    • Absolute pressure range: 0 to 400bar
    • Overpressure: 800bar
    • Resolution: 20mbar
    • Accuracy @ RT (20˚C to 25˚C): ≤±0.05% FS. Nonlinearity (BFSL), pressure hysteresis, non-repeatability, zero point, amplification.
    • Total error band (0˚C to 50˚C): ≤±0.05% FS. Max. deviation within the specified pressure and temperature range.
    • Long-term stability: ±0.1% FS. > 1 bar, per year under reference conditions, yearly recalibration recommended.
    • Long-term stability: ±0.1mbar. ≤ 1 bar, per year under reference conditions, yearly recalibration recommended.
    • Degree of dependency on location: <±1.5mbar. Calibrated in vertical installation position with pressure connection facing downwards.
    • Accuracy of temperature measurement: ±1˚C typ.
    • Pressure range reserve: ±10%

    Electrical Data

    • Battery: 3 V, type CR2430. LEX1 Ei only permitted for use in haz- ardous atmospheres when used with the Renata CR2430
    • Battery life: Approx. 2000 hours when used continuously
    • External power supply: 8...28 VDC
    • Overvoltage protection and reverse polarity of external power supply: ± 32 VDC
    • RS485 voltage insulation: -7...+12 VDC
    • GND case insulation: > 10 MΩ @ 50 VDC
    • External interface: RS485 half-duplex
    • Interface measuring rate: 30 measurements per second
    • Electrical connection: Fischer D 103 A054-130
    • CE conformity as per 2014/30/EU (EMC): EN 61000-6-1 to -6-4; EN 61326-1 / EN 61326-2-3

    Temperature Range

    • Compensated temperature range: 0...50 °C
    • Media temperature: 0...50 °C
    • Ambient temperature: 0...50 °C
    • Storage temperature: -20...70 °C

    Display

    • Dimensions/appearance: See Dimensions & options
    • Number of digits on LC display: 2 rows with 5 digits each
    • Display mode: Pressure + min/max or pressure + temperature
    • Measuring rate: 2 measurements per second
    • Configurable units of pressure: [bar], [mbar], [hPa], [kPa], [MPa], [PSI], [mH2O], [cmH2O], [inH2O], [ftH2O], [mmHg], [inHg], [kp/cm2]
    • Additional units of pressure: 5 user-defined units can be configured

    Mechanical data

    • Pressure connection: Stainless steel AISI 316L
    • Pressure transducer separating diaphragm: Stainless steel AISI 316L
    • Pressure transducer seal (internal): FKM (Viton® type A)
    • Pressure connection seal (external): FKM (Viton® type A)
    • Display housing: Faradex AS-1003
    • Oil filling sensor: Silicone oil
    • Pressure connection: G1/4, see Dimensions & options
    • Diameter x height x depth (approx.): 76 x 118 x 55 mm
    • Weight (approx.): 300 g
    • Protection: IP65
  • Product Documents

    Product Attachments

    View FileKeller LEX1 Datasheet    Size: (1.73 MB)
  • Product Questions

    Please Sign in or Create an account to post a question.

    There are no entries.

  • Reviews

    There are currently no reviews for this product. If you have previously purchased it please leave a review using our quick and easy form to the right.

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

  • Delivery Information

    At Test-Meter.co.uk we understand the importance of a reliable delivery service when shopping online. Especially when the goods are often essential to your working day. If your goods are required by a certain date please feel free to contact us for an honest and realistic indication whether this can be met. We aim to process all orders we receive within 1 to 3 working days, however from time to time we do have an increased demand for certain products or there might be delays from the manufacturer. In such cases delivery of your equipment may be subject to a minor delay.

    We use DPD/Interlink for all larger items and Royal Mail for smaller items and accessories. With DPD/Interlink you will receive a 1 hour delivery window on the day of delivery via e-mail/text and a notification 15 minutes before arrival so you will not have to wait around all day. You can even manage your booking online and re-arrange delivery for another date or arrange the goods to be left with a neighbour of your choice.

    We also offer delivery options for goods required urgently on certain products, all which are sent by DPD/Interlink.

    Our charges for UK deliveries:

    • FREE Delivery (on select products only): typically 3-5 working days*
    • Standard Delivery at £4.95: 2-3 working days
    • Next Working Day Delivery (on select products only) at £7.50
    • Pre-Noon Next Working Day Delivery (on select products only) at £9.50*
    • Pre-10.30am Next Working Day Delivery (on select products only) at £18.50*
    • Saturday Pre-Noon Delivery (on select products only) at £14.50*
    • Sunday Pre-Noon Delivery (on select products only) at £14.50*

    *UK mainland only

    NOTE! For next working day or Saturday/Sunday delivery options the order MUST be placed no later than 3pm on the working day before delivery is required. After 3pm, please arrange with our staff before selecting a priority delivery service. Priority services are available to UK mainland residents only (this might exclude certain areas in the north of Scotland).

    Customers outside the UK:

    Test-Meter.co.uk exports to many countries all over the world. Prices for shipping vary on location and weight/dimensions. Costs are calculated for certain countries at the checkout. If your country is not included in this list please e-mail admin@test-meter.co.uk with your name, address and the items you would like to order for an accurate shipping quote or go to http://www.test-meter.co.uk/test-equipment-export for more information.

    For more information on delivery, please see our terms and conditions.