Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Kewtech KEW2009R TRMS 2000A AC/DC Clamp Meter

Kewtech
SKU: KEWTKEW2009R
TRMS high current 2000A AC/DC and CATIV (600V) clamp meter with fast peak hold function.
More Info
Typically ships in 1-3 working days

Kewtech KEW2009R TRMS 2000A AC/DC Clamp Meter

The Kewtech KEW2009R is a auto-ranging, true RMS CAT IV rated (600V) clamp meter capable of safely measuring both AC and DC currents of up to 2000A. The clamp meter is supplied with a two-wire test lead set, allowing for voltage measurement of up to 750VAC and 1000VDC, as well as providing the capability of measuring resistance and electrical supply frequency.

Featuring jaws that will open and close around conductors up to 55mm in diameter, the KEW2009R also has the ability to capture voltage and current variation that occur in as little as 10 milliseconds, as well as being able to record a peak and average values makes the KEW2009R ideal for low and high power circuit measurement alike.

Kewtech KEW2009R Clamp Meter key features:

  • Measures 2000A AC/DC Current
  • Accurate TRMS measurement
  • Category IV electrical safety rating (600V)

What's In The Box?

2-wire test lead set

Output plug

Carry case

2 x AA batteries

Instruction manual

Specification

KEW2009R Specification:

AC A: 400.0/2000A: ±1.3%rdg ±3dgt (0-400A,150-1700A)(45-66Hz) ±2.0%rdg ±5dgt (0-400A,150-1700A)(20Hz-1kHz) ±2.3%rdg ±3dgt (1701-2000A)(45-66Hz)

DC A: 400.0/2000A ±1.3%rdg ±2dgt

AC V: 40.00/400.0/750V ±1.0%rdg ±3dgt (45-66Hz) ±1.5%rdg ±5dgt (20Hz-1kHz)

DC V: 40.00/400.0/1000V ±1.0%rdg ±2dgt

Ω: 400.0/4000Ω ±1.5%rdg±2dgt (Electronic protection (no fuse) up to 600V)

Continuity buzzer: Buzzer sounds below 20 Ω

Hz: 10.0-4000Hz ±1.5%rdg±5dgt (Input sensitivity Current:more than 40A Voltage:more than 10V)

Output Recorder: DC400mV against AC/DC400.0A, DC200mV against AC/DC2000A

Withstand voltage: 6880V AC for 5 seconds

Max. conductor size: diameter 55mm max.

Applicable standards: IEC 61010-1 CAT.IV 600V CAT III 1000, IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1 Power source: R6(1.5V)x2

Dimensions/Weight: 250(L) 105(W) 49(D)mm / Approx. 540g(including batteries)