Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Kewtech KT1710 Voltage Tester

SKU: KEWTKT1710
  • Indicates nominal voltage level via LED column - even without batteries
  • Performs two-pole testing, single-pole phase testing and continuity testing
  • Slimline probe tips according to GS38 standard
More Info
Typically ships in 1-3 working days

Kewtech KT1710 Voltage Tester

The Kewtech KT1710 Voltage Tester is a useful two-pole voltage detector that can detect voltage from 12 to 690V AC/DC. All the user needs to do to check for voltage is introduce the pole tips to the various phases, live, earth and neutral. It is also possible to perform a single-pole phase test and a continuity test with the tester.

When a voltage is detected, the Kewtech KT1710 gives a visual indication using the clear LED bar graph. The nominal voltage level is displayed at 12V, 24V, 50V, 120V, 230V, 400V and 690V and the LEDs will illuminate even without batteries. An additional audio signal also indicates voltage presence.

The Kewtech KT1710 has slimline slender probe tips according to GS38 standard and there is no need to swap ends. The ergonomic, lightweight design and simple controls make the tester very easy to use. It is safety rated Cat III 600V, Cat II 690V and is powered by two AA batteries.

Kewtech part number: KT1710

Key Features

  • Detection: 12V to 690V AC/DC
  • Two-pole tester
  • Single-pole phase test
  • Continuity test
  • LED bar graph
  • Audible tone
  • LEDs work without batteries
  • Cat III 600V, Cat II 690V
  • Comfortable, ergonomic design

What's In The Box?

  • Kewtech KT1710 Voltage Tester
  • Built in test leads
  • Batteries
  • Printed Instruction Manual
  • Certificate of Conformity
Specification

Voltage Test

  • Voltage Range: 12 - 690V AC/DC
  • Peak Current: Is <3.5mA CAT 400V
  • Internal Battery: Consumption Approx. 80mA
  • Measurement: Duty 30s ON/240s OFF duty
  • Nominal Voltage: 12/24/50/120/230/400/690V, AC50~60 Hz, DC (±)
  • LED Tolerance: According to EN61243-3
  • Response Time: <0.5s at 100% of each nominal voltage

Single Pole Phase Test

  • Voltage range: 100 to 690V AC (50/60Hz)

Continuity Test

  • Detection range: 0 to 500kΩ + 50%
  • Internal battery consumption: Approx 80mA

General

  • Operating ref. conditions: -15~55ºC no Condensation max 85% RH
  • Storage ref. condition: -20~70ºC no Condensation, max 85% RH
  • Safety standards: IEC 61010-1:2010, IEC 61243-3:2014
  • Category: CAT III 600, CAT II 690V, pollution deg 2
  • IP Rating: IP54 (IEC60529)
  • Approx dimensions: 215 x 58 x 25 mm
  • Weight: 145g (including batteries)
  • Batteries: 3V (2 x 1.5V AAA / R03)
Kit Option
Kewtech ELC100 Voltage Detection Kit
£115.00
In Stock - Available Next Day
More Info