LA-1011 LAN Cable Tester and Multimeter

SKU
LA1011
  • Multimeter testing functions such as current, voltage, resistance and continuity
  • Test the continuity and punching down of four-pair LAN cables and ground wire
  • Remote unit allows testing of data cables up to 300m length
More Info
inc VAT £40.74 ex VAT £33.95
In Stock - Available Next Day
 

Product Details

LA-1011 LAN Cable Tester and Multimeter

The LA-1011 LAN Cable Tester is capable of checking the continuity of eight-port LAN cables that have four pairs of copper wires as well as the ground wire. The status of each wire is given on the analogue display at the top of the meter and makes sure that the user can pick up any punching down errors on newly installed cables or systems that have developed faults. There is a remote terminator that has an LED display and it is capable of measuring continuity up to 300m away.

There are various test and measurement multimeter functions on the LA-1011 LAN Cable Tester including AC/DC voltage measurement (600V), AC/DC current (200mA), resistance measurement (20MΩ) and a continuity and diode testing function. Measurements are accurate and it has an autoranging function that maximises the reading resolution.

The clear digital screen on the LA-1011 LAN Cable Tester clearly shows readings in multimeter mode and will display the fault type in LAN testing mode whilst the remote probe and pin-out indicator will show which cable has a problem. There are maximum reading and data hold functions and operation is carried out using a simple dial and push button interface.

The LA-1011 LAN Cable Tester comes supplied with test leads, cables, a BN adaptor, 9V battery, two AAA batteries and a carry case as well as a remote probe.

Key Features

  • Checks LAN cable continuity
  • Tests ground wires
  • 300m range
  • AC/DC voltage: 600V
  • AC/DC current: 200mA
  • Resistance: 20MΩ
  • Continuity and diode tests
What's In The Box?
  • LA-1011 LAN Cable Tester
  • Remote LAN terminator
  • Test leads
  • Cables
  • BN adaptor
  • 9V battery
  • Two AAA batteries
  • Carry case
More Information
Specification
  • DC voltage range: 0 to 600V
  • DC voltage basic accuracy: ±0.5%
  • AC voltage range: 0 to 600V
  • AC voltage basic accuracy: ±1.2%
  • DC current range: 0 to 200mA
  • DC current accuracy: ±1.5%
  • AC current range: 0 to 200mA
  • AC current accuracy: ±2%
  • Resistance range: 20MΩ
  • Resistance accuracy: ±0.8%
  • Diode test: Test current 1mA max., open circuit voltage 1.5V typical
  • Continuity check: Audible signal if resistance <150Ω
  • Display: 2000 count 2 -1/2 digit LCD
  • Over range indication: LCD displays ‘OL’
  • Polarity: Minus sign for negative polarity
  • Low battery indication: “BAT” symbol indicates low battery.
  • Input impedance: >7.5MΩ (VDC & VAC)
  • AC response: Average responding
  • ACV Bandwidth: 50Hz to 60Hz
  • Auto power off: 15 minutes
  • Fuse: mA, µA ranges; 0.2A/250V, fast acting fuse
  • Batteries: 9V