Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Martindale CM95 AC Flexible Clamp Meter

Martindale
SKU: MARTCM95
  • 10-inch flexible coil clamp ideal for cramped conditions
  • Measures 0 to 400A AC with 0.001A resolution and ±3% accuracy
  • Safety rated as Cat III 1000V and Cat IV 600V
More Info
In Stock - Available Next Day

Martindale CM95 AC Flexible Clamp Meter

The Martindale CM95 AC Flexible Clamp Meter has an 10”, 5.5mm diameter flexible clamp cable that can wrap around multiple conductors, fit around individual conductors in cramped wiring cabinets or be wrapped around extremely wide conductors up 85mm in diameter. The true RMS AC current measurement range goes from 0.001A to 400A AC and the accuracy stands at ±3%.

Measurements are shown on the Martindale CM95’s backlit digital screen and the user can select the appropriate range by using the simple dial. The clamp is attached to the meter by a 1.8m flexible cable and there are also push buttons that control screen brightness, min/max recording and data hold.

The Martindale CM95 is safety rated as Cat III 1000V, Cat IV 600V and has an ergonomic design so it is easy to use in challenging conditions. The battery lasts for roughly 120 hours and the clamp is supplied with batteries and a comprehensive instruction manual.

Martindale part number: MARCM95

Key Features

  • 18” flexible coil clamp
  • Max clamping diameter: 85mm
  • True RMS AC current range: 0 to 400A
  • AC current resolution: 0.001A
  • AC current accuracy: ±3%
  • Min/max recording
  • Cat III 1000V, Cat IV 600V

What's In The Box?

  • Martindale CM95 AC Flexible Clamp Meter
  • Instruction manual for Martindale CM95
  • 2 x AAA batteries
Specification

AC current

  • 0 to 400A
  • Resolution: 0.001A
  • Accuracy: ±3%

General

  • Display: Liquid crystal display with maximum reading 4200
  • Sample rate: 2 times/sec
  • Overrange: “ — OL — ” is displayed
  • Power: 2 x 1.5V, AAA alkaline batteries (IEC LR03, NEDA 24A)
  • Battery life: 120 hours typical with alkaline
  • Low battery indication: symbol is displayed
  • Auto power off: After 15 minutes
  • Dimensions: 120mm (L) x 70mm (W) x 26mm (D)
  • Cable length (probe to meter): 1.8m
  • Flexible sensor length: 254mm
  • Flexible sensor diameter: 5.5mm nominal
  • Maximum conductor diameter: 85mm
  • Weight (including batteries): 196g approx
  • Includes: 2 x 1.5V AAA batteries, instructions

ENVIRONMENTAL

  • Temperature & Humidity: (Operating): 0°C to 50°C <80% R.H., non-condensing; (Storage): -10°C to 60°C < 70% R.H., batteries removed
  • Altitude: Up to 2000m
  • Pollution degree: 2

SAFETY

  • Conforms to: BS EN 61010-1, BS EN 61010-2-032, CAT IV 600V, CAT III 1000 V
  • Class II, double insulation

EMC

  • Conforms to BS EN 61326-1