Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Martindale FD650 Elite Fuse Finder Kit

Martindale
SKU: MARTFD650
The Martindale FD650 Elite Fuse Finder Kit brings microprocessor controlled multi-level sensitivity to fuse and breaker identification.
More Info
In Stock - Available Next Day

Martindale FD650 Elite Fuse Finder Kit

The Martindale FD650 Elite Fuse Finder Kit brings microprocessor controlled multi-level sensitivity to fuse and breaker identification. A 6 segment bargraph gives progressive indication of signal strength which allows even faster identification.

The Elite Fuse Finder can operate in two modes:

  • Automatic, which has a memory and the ability to automatically adjust sensitivity for foolproof identification.
  • Manual mode, which allows very rapid fuse finding using the 6 segment bargraph.

This fuse finder kit is capable of operating with either the 13A plug top lead for sockets or the TL83 lead for light fittings or other points in a circuit where there are no standard 13A power sockets. Complete with a non-contact voltage indicator, the FD650 really is a multipurpose version of the F550.

What's In The Box?

  • FD650/R receiver
  • FD600/T multi-purpose transmitter
  • IEC 13A mains adaptor
  • TL83 2 wire fused leads with IEC connector
  • Carry case
  • Battery
Specification

Transmitter

  • Voltage rating: 230V
  • Frequency range: 50-60Hz
  • Switching frequency: approx. 5Hz
  • Transmission pulse width: approx. 1.7μS
  • Transmission pulse amptitude: 20A max
  • Temperature range: -10°C to 40°C at max 60% RH
  • Dimensions: Approx: 65 x 65 x 46mm
  • Weight: 65g
  • Earth Leakage: Nil
  • Power supply: From mains
  • Power consumption: Approx. 1W
  • Overvoltage category: Cat III/300V
  • Pollution degree: 2
  • Protection Class: IP20

Receiver

  • Tracing depth for fuse assignment: approx. 0 - 10cm, depending on local conditions.
  • Sensitivity setting: via on/off potentiometer
  • Temperature range: -10°C to 40°C at max 60% RH
  • Dimensions: 202 x 32 x 22mm.
  • Weight: 150g (excluding battery)
  • Protection class: IP20
  • Power supply: 9V battery, MN1604/PP3, IEC 6LA61 (alkaline only)

Voltage Indicator

  • Voltage range: 40 - 600 V
  • Sensitivity: Indication distance from a flat PVC 1mm2 twin and earth cable suspended in free space.
  • 3mm at 110V AC 50Hz.
  • 23mm at 240V AC 50Hz.
  • Frequency range: 50Hz to 50kHz
  • Indication: Red LED and audible tone (2kHz) in the presence of an AC voltage. Green LED indicates internal battery condition.
  • Operating temperature: -5° to 40°C

Not recommended for use on high energy circuits.

Units are EMC compliant.

There are no user serviceable parts in the transmitter or receiver.