BLACK FRIDAY SALE: Shop Now

Megger DET4TC2 Professional Earth Testing Kit 1000-404

Be the first to review this product

  • Features Megger DET4TC2 Earth Tester as primary instrument
  • Enhances capabilities with clamps for ART and stake-less testing
  • Includes additional professional ground testing kit

rrp £1,865.00

now £1,745.00 (Ex. VAT) £2,094.00 (Inc. VAT)

rrp £1,865.00

Please select a free gift below.

"Enhances the capabilities of the Megger DTC4TC2 Earth Tester"

  • Description

    Megger DET4TC2 Professional Earth Testing Kit

    The Megger DET4TC2 Professional Earth Testing Kit features the sophisticated Megger DET4TC2 Earth Tester as its primary device alongside several accessories which considerably enhance ground-testing capabilities. The instrument itself can perform one-, two-, and three-pole testing; leakage current measurement; and ground noise voltage measurement over impressive ranges. The device has voltage outputs of 25V or 50V with a range of different currents and frequencies which are all easily substituted, even with gloves. The Megger DET4TC2 Earth Tester is weatherproof to IP54 standard and meets all relevant safety standards including IEC61010-1 Cat IV 100V. It is powered by eight commonly available AA batteries so it is extremely practical.

    The Megger DET4TC2 Professional Kit enhances the earth tester’s capabilities on several levels. Firstly, as with the Megger DET4TC2 Earth Testing Kit with Clamps, the ICLAMP allows ART testing and the VCLAMP permits stake-less testing when conditions do not allow the user to drive stakes into the ground. In addition, the supplied field calibration check for the clamps and the instrument helps safeguard accuracy.

    The included professional ground testing kit provides everything the user might need to carry out comprehensive ground tests with the Megger DET4TC2. It includes two 50m wires, two 30m wires, four auger stakes, a tape measure and hard carry case. This is all provided on top of the standard stake and wire kit so the user’s measurement options are greatly increased. All in all, the Megger DET4TC2 Kit helps the user get the most out of his or her Megger DET4TC2 Earth Tester when carrying out accurate, comprehensive ground testing.

    Megger part number: 1000-404

    Key Features

    • Megger DET4TC2 Earth Tester
    • Professional ground testing kit including 2 x 50m wires, 2 x 30m wires, four auger stakes, a tape measure and hard carry case
    • Standard hard carry case
    • Standard stake and wire kit (15m, 10m, 10m, 3m)
    • ICLAMP for ART testing
    • VCLAMP for stake-less testing
    • Field calibration check for instrument and clamps
    • Right angle terminal adaptors for connecting bare wires to terminals
    • Calibration certificate
     DET3TADET3TCDET3TDDET4TC2DET4TC2Clamp KitDET4TC2Pro KitDET4TCR2DET4TCR2Clamp KitDET4TCR2Pro KitDET4TD2DET4TR2
    3 pole testing
    4 pole testing      
    Stakeless testing          
    ART testing        
    Compatible withclamps          
    Supplied withclamps              
    Supplied withPro ET Set                  
  • Specification

    • Ingress protection: IP54
    • C stake, P stake and Noise check: Automatic
    • Noise rejection: 40 V pk to pk
    • 2-wire, 3-wire, 4-wire test: Yes, no shorting links required
    • No disconnect testing (ART): Yes, with ICLAMP
    • Stakeless measurement: Yes, with ICLAMP and VCLAMP

    Instrument output

    • Voltage: ±25 V or ±50 V at 94 Hz, 105 Hz, 111 Hz and 128 Hz
    • Current: 4.5 mA or 0.45 mA or 0.045 mA
    • Ground current range with clamp: 0.5 mA to 19.9 A
    • Ground current accuracy: 5% ±3 digits
    • Ground voltage range: 0 to 100 V ac
    • Ground voltage accuracy: 2% ±2 V

    Resistance ranges

    • 2, 3, 4 pole: 0.01 Ω to 200 kΩ
    • ART: 0.01 Ω to 200 kΩ
    • Stakeless: 0.01 Ω to 200 Ω

    Resistance accuracy

    • 2P measurements: 2% ±3 digits
    • 3P measurements: 2% ±3 digits
    • 4P measurements: 2% ±3 digits
    • ART measurements: 5% ±3 digits
    • Stakeless measurements: 7% ±3 digits

    Maximum probe resistance

    • Rp limit: 200 kΩ (50 V output voltage)
    • Rc limit: 200 kΩ (50 V output voltage)
    • Limits reduced to 100 kΩ for 25 V output voltage
    • Limits reduced to 5 kΩ for 0.01 Ω resolution
    • Display: 3.5” digit high contrast liquid crystal, backlit
    • Battery type: DET4TC2: 8 off AA (LR6) cells
    • Operating temperature range: -15 °C to +55 °C / 5 °F to 131 °F
    • Storage temperature range: -40 °C to +70 °C / -40 °F to 158 °F

    Safety

    • Complies with the requirements of IEC61010-1 100V CAT IV between terminal pairs.*

    EMC

    • In accordance with IEC61326-1

    Standards Compliance

    • Complies with the requirements of KEMA K85B
    • Complies with the following parts of EN61557, “Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures”.
    • Part 1 - General requirements
    • Part 5 - Resistance to earth
    • Dimensions: 203 mm x 148 mm x 78 mm (8 in x 5.8 in x 3 in)
    • Weight: 1kg (2.2lb)

    *The CAT IV 100 V rating is dependant on the use of a lead set of
    at least this rating, for example the optional two wire lead set part
    number 1001-858.

  • Supplied Accessories

    • Megger DET4TC2 Earth Tester
    • Standard hard carry case
    • Standard stake and wire kit (15m, 10m, 10m, 3m)
    • ICLAMP for ART testing
    • VCLAMP for stake-less testing
    • Field calibration check for instrument and clamps
    • Right angle terminal adaptors for connecting bare wires to terminals
    • Calibration certificate

    PLUS professional ground testing kit including:

    • 2 x 50m wires
    • 2 x 30m wires
    • 4 x auger stakes
    • 1 x tape measure
    • 1 x hard carry case
  • Product Questions

    Please Sign in or Create an account to post a question.

    There are no entries.

  • Reviews

    There are currently no reviews for this product. If you have previously purchased it please leave a review using our quick and easy form to the right.

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

  • Delivery Information

    At Test-Meter.co.uk we understand the importance of a reliable delivery service when shopping online. Especially when the goods are often essential to your working day. If your goods are required by a certain date please feel free to contact us for an honest and realistic indication whether this can be met. We aim to process all orders we receive within 1 to 3 working days, however from time to time we do have an increased demand for certain products or there might be delays from the manufacturer. In such cases delivery of your equipment may be subject to a minor delay.

    We use DPD/Interlink for all larger items and Royal Mail for smaller items and accessories. With DPD/Interlink you will receive a 1 hour delivery window on the day of delivery via e-mail/text and a notification 15 minutes before arrival so you will not have to wait around all day. You can even manage your booking online and re-arrange delivery for another date or arrange the goods to be left with a neighbour of your choice.

    We also offer delivery options for goods required urgently on certain products, all which are sent by DPD/Interlink.

    Our charges for UK deliveries:

    • FREE Delivery (on select products only): typically 3-5 working days*
    • Standard Delivery at £4.95: 2-3 working days
    • Next Working Day Delivery (on select products only) at £7.50
    • Pre-Noon Next Working Day Delivery (on select products only) at £9.50*
    • Pre-10.30am Next Working Day Delivery (on select products only) at £18.50*
    • Saturday Pre-Noon Delivery (on select products only) at £14.50*
    • Sunday Pre-Noon Delivery (on select products only) at £14.50*

    *UK mainland only

    NOTE! For next working day or Saturday/Sunday delivery options the order MUST be placed no later than 3pm on the working day before delivery is required. After 3pm, please arrange with our staff before selecting a priority delivery service. Priority services are available to UK mainland residents only (this might exclude certain areas in the north of Scotland).

    Customers outside the UK:

    Test-Meter.co.uk exports to many countries all over the world. Prices for shipping vary on location and weight/dimensions. Costs are calculated for certain countries at the checkout. If your country is not included in this list please e-mail admin@test-meter.co.uk with your name, address and the items you would like to order for an accurate shipping quote or go to http://www.test-meter.co.uk/test-equipment-export for more information.

    For more information on delivery, please see our terms and conditions.