Megger TDR2000/2P Power Time Domain Reflectometer

Megger TDR2000/2P Power Time Domain Reflectometer

This product has now been discontinued and replaced with the Megger TDR2000/3 Advanced Dual Channel TDR.

The Megger TDR2000/2P Power Time Domain Reflectometer is a state of the art dual channel cable fault locator capable of identifying and locating a wide range of faults on metallic cables. This Power version of the TDR2000/2 has been specifically designed for the power industry. As such it is suitable for use on either dead or live cables to CATIII 300V phase to earth or 415V phase to phase. It comes complete with pairs of 2 metre long fused test leads, fitted with 30mm gape crocodile clips for easy connection to large diameter cables. The TDR2000/2P has a minimum resolution of 0.1m and a maximum range of 20 km at a velocity factor of 0.9 and 16 km at a velocity factor of 0.65. The TDR2000/2P can perform single or dual channel measurements on a wide range of metallic cables. Active channels can be compared with each other or with previously stored traces from memory. Differential channel measurements are possible and cross talk between channels can also be identified. All results are displayed on a high resolution, backlit monochrome display. Full contrast adjustment provides optimum display contrast in a variety of ambient light conditions.

Developed from the highly successful TDR2000 range this new model of cable fault locator offers an extensive range of extra functions. An 'intermittent mode' continually updates, capturing and displaying any transient reflections. The TDR2000 2P cable fault locator can display either single or dual cursors. The single cursor mode displays the distance from the start of the cable to the cursor. In dual cursor mode the distance between faults can be measured. As with the Megger TDR1000/2 a simple press of the find key will automatically position the cursor to the major event on the cable. TX Null helps eliminate the 'dead zone' at the start of the displayed trace. Both the amplitude and width of the output pulse can be adjusted to provide the best possible reflection for accurate location of cable faults. The Megger TDR 2000/2P offers an internal memory that can store up to 15 traces that can be recalled to the display for analysis or compared with an active display to aid in fault location. Additionally, stored results can be downloaded to a computer using the RS232 lead provided. The Trace Master software included with the time domain reflectometer provides download and upload facilities between the TDR and a computer. Traces can be individually selected, saved to a PC and annotated by the user. Tracemaster is the ideal tool for cable documentation.

Megger TDR2000/2P Power version Features:

• Specifically designed for the power industry
• Fused 2 metre croc-clip lead set
• Suitable for use on either dead or live cables
• For use on 300V CAT III (415 V phase to phase) power circuits with fused leads
• 20km range at VF 0.9
• 16km range at VF 0.65
• Intermittent fault location
• Dual cursor measurement
• Output pulse amplitude and width control
• 11 fault location modes
• External mains blocking filter not required
• Large backlit LCD display
• Screen contrast control
• TX Null technology
• Multi language operation, uploadable using TraceMaster software
• 3 step pulse amplitude control
• Adjustable display contrast
• 15 trace internal memory
• Rechargeable NiMH battery pack and charger
• Protected to IP54
• High impact ABS case
• Comes with test and carry case and test leads

Megger item number: 6411-038