Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Metrel A1532 Electric Vehicle Charging Station Adaptor

Metrel
SKU: METRA1532
  • Test EVSE electric vehicle charging points for safety and functionality
  • Allows MFT to simulate vehicle attached to charging point in various states
  • Compatible with any Metrel MFT, particularly MI3152 Eurotest XC
More Info
In Stock - Available Next Day

Metrel A1532 Electric Vehicle Charging Station Adaptor

The Metrel A1532 Electric Vehicle Charging Station Adaptor allows the user to carry out functional and safety tests on an electrical vehicle (EVSE) charging point under live conditions without having to disassemble the charging point to access the terminals. It is suitable for Mode 3 EV supply equipment with type 2 connectors.

The Metrel A1532 works with any Metrel multifunction tester (single- and three-phase) although some specific instruments - for example the Metrel MI3152 Eurotest XC - have dedicated functionality and test routines to complement the adaptor. This includes an automatic sequence which will test safety and functionality on a state-by-state basis at the push of a button.

The adaptor effectively simulates a vehicle connected to the charging point with selectable options for different charge outputs: disconnected, charge ready, charging, and pilot error. This includes vehicles with or without cooled/ventilated power requirements and proximity pilot simulation can be adjusted to a range of different currents. It is also possible to test progressive RCDs (30mA AC and 6mA DC) as well as type B RCDs.

All testing with the Metrel A1532 can be carried out without having to open up the charging point in order to access internal terminals. Furthermore the adaptor has a BNC connector that is directly connected to the Control Pilot, allowing analysis of station signals for different charging states. It is also possible to perform a full test of the associated connecting cables, plugs and sockets under live conditions.

Supported Instruments

  A1352 EVSE Test Adaptor 30/6mA EV RCD Type B RCD RCM Test Functional Test EVSE Autosequence EVSE Report with MESM Pro
MI3152 ✔ ✔ ✔   ✔ ✔ ✔
MI3102BT ✔ ✔ ✔       ✔
MI3100 ✔            
MI3125BT ✔ ✔ ✔       ✔
MI3125-L ✔            

Key Features

  • Safety and functionality test on EV charging points
  • Test under live conditions without disassembling point
  • Test connecting cables, plugs and sockets
  • Compatible with any Metrel MFT
  • Auto test sequence with Metrel MI3152
  • Simulates vehicle attached to charging point
  • Proximity pilot and control pilot testing

Metrel part number: A1532

Metrel A1532 and Metrel A1532XA EV Adaptor Comparison Table

  A 1532 EVSE Adadpter A 1532 XA EVSE Adadpter
Features
EVSE Mode ✔ ✔
AUTOSEQUENCES ✔ ✔
EVSE Measurements
Proximity Pilot 0-64 A ✔ ✔
Control Pilot States Settings ✔ ✔
Line Impedance for Charging Station ✔ ✔
Fault Loop Impedance for Charging Station ✔ ✔
Functional Test of Proximity Pilot ✔ ✔
Functional Test of Control Pilot ✔ ✔
Isolation Test for Charging Station ✔ ✔
1-Phase Charging Station Testing ✔ ✔
1-Phase Test Through Socket ✔ ✔
3-Phase Charging Station Testing ✔ ✔
Diode Short Error Simulation - ✔
PE Open Error Simulation - ✔
CP Short Error SImulation (E State) - ✔
Load Test up to 13 A - ✔
Building Facilities
EVSE Construction and Testing ✔ ✔
Standards Applied
Building LV Installation
EISinsp Competences:
Low Voltage Electrical Installation
Safety Inspection		 ✔ ✔
EISc Competences:
Low Voltage Electrical Installation
Safety for Contractors and Maintainers		 ✔ ✔
IEC/EN 61557 Electrical Safety
in Low Voltage Distribution Systems up to 1000V AC and 1500V DC
- Equipment for testing, measuring or monitoring of protective measures - series		 ✔ ✔
Standards Applied
Electrical Vehicle Supply Equipment
EVSE Competences:
Electrical Vehicle Supply
Equipment Safety		 ✔ ✔
IEC/EN 61851 Electric Vehicle
Conductive Charging System		 ✔ ✔

What's In The Box?

  • Metrel A1532 EVSE Charger Adaptor
  • Small soft carrying bag
  • Instruction manual
Specification
  • Input voltage: 400V (3-phase)
  • Frequency: 50Hz
  • Test current: 13A
  • Proximity Pilot (PP) simulation: Open circuit; 13A; 20A; 32A; 63A
  • Control Pilot (CP) simulation: State A (not connected), State B (connected, not charging);
  • State C (charging without ventilation); State D (charging with ventilation); State E (error - CP short to PE via diode)
  • Overvoltage category: 300V Cat II
  • Protection degree: IP40
  • Pollution degree: 2
  • Protection classification: Double insulation
  • Altitude: 3000m sea level
  • Dimensions (L x W x H): 200mm x 100mm x 70mm
  • Test lead length: 0.5m
  • Weight: 0.82kg
  • Working temperature range: 0˚C to 40˚C @ 95% RH, non-condensing
  • Storage temperature range: -20˚C to 70˚C
  • Maximum storage relative humidity: 90% RH (10˚C to 40˚C); 80% RH (40˚C to 60˚C)
Kit Option
Metrel EVSE Test Standard Kit
£925.00
In Stock - Available Next Day
More Info
Kit Option
Metrel MI3152 EurotestXC EVSE Pro Test Kit
£1,399.00
In Stock - Available Next Day
More Info