Radiodetection SuperCAT4+ Utility Locator

Radiodetection SuperCAT4+ Utility Locator

The Radiodetection SuperCAT4+ Utility Locator , with enhanced features and improved safety practices, is one of three utility-specific locating tools in the extremely impressive Radiodetection SuperCAT4+ range. This model is incredibly efficient in finding buried cable types within the demanding environment of the construction industry. Compatible with a host of sondes and other accessories, this unit locates cables via a comprehensive set of active frequencies. Thanks to the widest frequency detection range in the series, when paired with the correct transmitter the SuperCAT4+ is adept at locating twisted-pair telecom cables, insulated pipe joints, power lines and more.

Operating Modes

Safe excavation of buried assets can be a complex process due to many unavoidable external factors, however it is vital this task is performed as accurately as possible in order to avoid unnecessary repairs, outages, delays or even personal injuries. The SuperCAT4+ Locator is ideally suited for this task as it features higher frequencies such as 131kHz & 65kHz which can be used to find
well-insulated higher resistance utilities, or lower frequency options such as 8kHz & 33kHz for long range locating of utilities with a lower resistance. Notably, there are several other detection modes included with the SuperCAT4+:

• Sonde Mode - Detects the signal radiated by a compatible sonde.
• Radio Mode - Detects long-range radio signals as they are re-radiated along buried metallic cables and pipes.
• Power Mode (50Hz /60Hz) - Detects the electromagnetic fields generated by loaded power cables.
• Active Line Mode (when using external T1 Transmitter) - Detects the T1 signals which are radiated by buried utilities.

Additionally, an active 33kHz frequency can be applied to a FlexiTrace accessory through the use of a T1-640 Transmitter for continuous signal tracing. Truly safe excavation can only be achieved by accurately locating buried assets, a task the Radiodetection SuperCAT4+ Locator can perform both swiftly and simply.

Safety Features

All SuperCAT4+ models are supplied with a range of safety features:

StrikeAlert - Despite guidelines insisting power cables are buried at a certain depth, it is not uncommon to find shallow cables. StrikeAlert warns the user of the presence of these incorrect utility lines and is automatically enabled for Power and Active Line Modes.

Depth Display - An automatic feature compatible with CPS and Active Line Mode, this will inform users of the accurate depth should conditions be suitable for a reading.

Dynamic Overload Protection - Typically found near substations or high-voltage transmission cables, high levels of electrical interference can overload some sensitive electronics. This protective safety measure will filter the interference out and enable the SuperCAT4+ CMS locator to continue operating successfully where other units may falter.

Built For On-Site Use

The Radiodetection SuperCAT4+ Locator is a light-weight, hard-wearing and IP54 rated unit protected by an ABS casing and suitable for all-weather operation. The tactile interface includes a trigger switch for on/off, mode selector switch, detachable loudspeaker and sensitivity control dial. At the bottom of the device a replaceable boot protects against drops and knocks whilst on the handle, a high contrast screen features an auto-backlight function and bar graph display. Powered by two D-Cell batteries, the locator is completed by a USB data port which ensures the unit can benefit from any future software upgrades.

T1 Transmitter

Enhance your SuperCAT4+ Utility Locator even further by introducing it to the Radiodetection T1-640 Transmitter. Exceptionally compact and portable, this highly useful piece of kit features simple frequency selection and an accessible accessory socket. While using the T1-640 Transmitter, your SuperCAT4+ Locator can utilise Active Line Mode.

The T1-640 Transmitter offers a direct connection to a valve, meter, junction box or any other access point or when direct connection is not possible, it can apply a transmitter signal via induction to a pipe or cable. For an alternative to the direct or induction connection, it is also safe to combine the T1-640 with a clamp.

For an additional alternative transmitter, please see the optional accessories above. The T1-640 Transmitter features 640Hz, 8kHz & 33kHz frequencies, the T1-640/65 Transmitter includes 640Hz, 8kHz & 65kHz frequencies whilst the T1-131 Transmitter comes complete with 131kHz, 8kHz & 33kHz frequencies.

Please note the Radiodetection SuperCAT4+ Utility Locator uses the metric system. If you require an Imperial system please contact us for price and availability.

Key Features

• Part of the Radiodetection SuperCAT4+ range
• Built to detect a comprehensive range of frequencies
• Designed to use a range of accessories including sondes
• Avoid outages, unnecessary repairs, delays or injuries
• Boasts a high level of sensitivity
• Features multiple operating modes
• Utilises the Metric system
• Compatible with multiple T1 series Transmitters
• StrikeAlert safety feature built-in
• Depth Display included
• Dynamic Overload Protection provided
• Compatible withe FlexiTrace accessory for continuous testing
• USB data port for introducing future software upgrades
• Auto-backlit display screen
• ABS outer casing rated IP54
• Lightweight and portable
• Battery powered

Radiodetection SuperCAT4+ Range

The Radiodetection SuperCAT4+ Range features three models each specifically designed to meet the needs of a specific industry challenge.