NHS & School Discounts Available: Please call for more information.

Watch Video

TPI 709R Flue Gas Analyser Kit 3

Be the first to review this product

  • Measures ambient CO and stays on to warn of dangerous levels
  • Temperature, O2, CO, and pressure measurement
  • CPA1 flue gas probe set for flue-less installations

rrp £540.00

now £432.00 (Ex. VAT) £518.40 (Inc. VAT)

rrp £540.00


Please select a free gift below.

Choose Your Free Gift (please tick below)
  • Description

    TPI 709R Flue Gas Analyser Kit 3

    For a limited time only, get 20% off the TPI 709R Flue Gas Analyser Kit 3.

    The TPI 709R Flue Gas Analyser Kit 3 contains a CPA1 probe set, two CK21M temperature pipe clamps, and a TPI A740 IR Printer to go alongside the analyser itself. It can measure oxygen and carbon monoxide levels in flue gas as well as detecting CO in ambient air. For additional safety, the instrument will not switch off when dangerous levels of CO are detected. Non-gas measurements include flue temperature and pressure, which permits calculation of tightness and let by. Other calculation options include carbon dioxide level, efficiency and excess air.

    Alongside the standard flue probe, the TPI 709R CPA1 probe set provides accuracy and precision on flue-less piping whilst the two temperature pipe clamps furnish the user with a more complete picture of combustion-system performance. A GK11M air probe allows the measurement of ambient CO.

    Readings are shown on the TPI 709R’s backlit digital screen and they are stored in the analyser’s internal memory. There is space for up to 50 digital recording sets whilst hard copies can be printed out on the A740 printer via wireless infrared data transfer. Operation is simple thanks to clearly labelled push buttons and internal software helps analyse the results of inspections.

    The TPI 709R is built to last with supplied water and dust filters to help keep the instrument sealed. Shock-proof rubber casing and a six-year warranty (with annual approved servicing) provide further peace of mind.

    Key Features

    • CO range: 0 to 10000ppm
    • CO2 range: 0 to 25%
    • O2 range: 0 to 25%
    • CO/CO2 ratio calculation
    • Efficiency, tightness, and excess air calculation
    • Flue temperature range: -40˚C to 800˚C
    • Pipe surface temperature range: -50 to 250˚C (via CK21M clamps)
    • CPA1 probe set
    • A740 infrared printer
    • Internal memory for 50 reading sets
    • Six-year warranty (with approved servicing)
    • Dust and water filters

    We offer the following kits for the TPI 709R:

     Standard KitKit 1Kit 2Kit 3Kit 4Kit 5Oil Kit
    TPI 709R Flue Gas Analyser
    A740 IR Printer  
    2 x CM21K Temperature Pipe Clamp Probes      
    CPA1 Probe Set          
    TPI 719 Gas Leak Detector          
    Oil filter            
    Smoke Pump            


    TPI 709R Kit Featured Contents

    • TPI 709R Flue Gas Analyser

    TPI 709R Kit 1 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer

    TPI 709R Kit 2 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps

    TPI 709R Kit 3 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • CPA1 Probe Set

    TPI 709R Kit 4 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • TPI 719 Gas Leak Detector

    TPI 709R Kit 5 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • CPA1 Probe Set
    • 719 Gas Leak Detector

    TPI 709R Oil Kit Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • Smoke pump
    • Oil filter
  • Specification


    • Operating Temperature Range: -10°C to +50°C (14°F to +122°F)
    • Battery / Battery Life: Rechargeable Ni-MH / > 6 Hours
    • Charger Input Voltage: 115V or 230V : 50/60 Hz AC
    • Fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite, Coal, Coke, Butane, Wood, Bagasse
    • Pressure Ranges: mbar, kPa & inH2O
    • Display: Backlit Graphic LCD
    • Data Storage: 50 sets of readings, multiple pages
    • Time and Date: 24 Hour Real Time Clock
    • Dimensions: 200mm (7.8”) x 90mm (3.5”) x  60mm (2.4”)
    • Weight: 500g
    • Casing: Rubber Boot as Standard
    • Switch Off: Failsafe
    • Exhaust: Safety Spigot
    • Conforms to: EN50379

    Flue Temperature Probe

    • Construction: Pistol Grip with Stainless Steel Shaft
    • Hose Length: 2500mm (8.2’)
    • Insertion Length: 200mm (7.9”)
    • ‘K’ Type Thermocouple Accuracy: +/- 0.3% of fullscale, +/- 1°C (2°F)
    • Maximum Temperature: 800˚C (1472°F) 

    Parameter: Oxygen / Carbon Monoxide / Carbon Dioxide (calculated) / CO/CO2 Ratio / Combustion Efficiency

    • Range: 0-25% / 0-10,000 ppm / 0-25% / 0-0.999 / 0-100%  
    • Resolution: 0.1% / 1 ppm / 0.1% / 0.001 / 0.1% 
    • Accuracy: +/- 0.3% / (<20ppm) +/- 3 ppm (>=100ppm) +/- 5% / Calculated / +/- 0.3%

    Pressure Measurement

    • Unit options: mbar, kPa and inH2O
    • Range: 150 mbar to + 150 mbar
    • Resolution: 0.01 mbar & 0.1 mbar

    CK21M Pipe Temperature Clamp

    • Max diameter: 30mm
    • Lead length: 1.5m
    • Measurement range: -50˚C to 250˚C
  • Supplied Accessories

    • TPI 709R Flue Gas Analyser
    • Rubber Boot (A765) 1 each installed on analyser
    • Soft Carrying Case (A768) – 1 each
    • Sampling Probe (c/w Type “K” Thermocouple)
    • In-Line Water Trap Bowl Filter (c/w Spare Particle Filter)
    • Battery Charger (A766)
    • Mini In-Line Pump Protection Filter (c/w 5 spare filters)
    • Exhaust Spigot Removable (A764)
    • Battery Charger (A766) – 1 each
    • Mini Pump Protection Filter Assembly (A763) – 1 each
    • Exhaust Spigot Removable (A764) – 1 each
    • Pressure Tubing (2 x 1 metres)
    • GK11M Air Probe
    • Instruction Manual
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • CPA1 Probe Set
  • Product Documents

    Product Attachments

    View FileTPI 709R Datasheet    Size: (661.39 KB)
  • Product Questions

    Please Sign in or Create an account to post a question.

    There are no entries.

  • Reviews

    There are currently no reviews for this product. If you have previously purchased it please leave a review using our quick and easy form to the right.

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

  • Delivery Information

    At Test-Meter.co.uk we understand the importance of a reliable delivery service when shopping online. Especially when the goods are often essential to your working day. If your goods are required by a certain date please feel free to contact us for an honest and realistic indication whether this can be met. We aim to process all orders we receive within 1 to 3 working days, however from time to time we do have an increased demand for certain products or there might be delays from the manufacturer. In such cases delivery of your equipment may be subject to a minor delay.

    We use DPD/Interlink for all larger items and Royal Mail for smaller items and accessories. With DPD/Interlink you will receive a 1 hour delivery window on the day of delivery via e-mail/text and a notification 15 minutes before arrival so you will not have to wait around all day. You can even manage your booking online and re-arrange delivery for another date or arrange the goods to be left with a neighbour of your choice.

    We also offer delivery options for goods required urgently on certain products, all which are sent by DPD/Interlink.

    Our charges for UK deliveries:

    • FREE Delivery (on select products only): typically 3-5 working days*
    • Standard Delivery at £4.95: 2-3 working days
    • Next Working Day Delivery (on select products only) at £7.50
    • Pre-Noon Next Working Day Delivery (on select products only) at £9.50*
    • Pre-10.30am Next Working Day Delivery (on select products only) at £18.50*
    • Saturday Pre-Noon Delivery (on select products only) at £14.50*
    • Sunday Pre-Noon Delivery (on select products only) at £14.50*

    *UK mainland only

    NOTE! For next working day or Saturday/Sunday delivery options the order MUST be placed no later than 3pm on the working day before delivery is required. After 3pm, please arrange with our staff before selecting a priority delivery service. Priority services are available to UK mainland residents only (this might exclude certain areas in the north of Scotland).

    Customers outside the UK:

    Test-Meter.co.uk exports to many countries all over the world. Prices for shipping vary on location and weight/dimensions. Costs are calculated for certain countries at the checkout. If your country is not included in this list please e-mail admin@test-meter.co.uk with your name, address and the items you would like to order for an accurate shipping quote or go to http://www.test-meter.co.uk/test-equipment-export for more information.

    For more information on delivery, please see our terms and conditions.