NHS & School Discounts Available: Please call for more information.

Watch Video

TPI 709R Flue Gas Analyser Kit 5

Be the first to review this product

  • Detection of both CO and hydrocarbons in ambient surroundings
  • Calculation/measurement of CO, O2, CO2, efficiency, excess air, & tightness
  • CPA1 probe set included for work on flue-less appliances

rrp £590.00

now £472.00 (Ex. VAT) £566.40 (Inc. VAT)

rrp £590.00

OR

Please select a free gift below.

Choose Your Free Gift (please tick below)
  • Description

    TPI 709R Flue Gas Analyser Kit 5

    For a limited time only, get 20% off the TPI 709R Flue Gas Analyser Kit 5.

    The TPI 709R Flue Gas Analyser Kit 5 option has a range of useful accessories that allow tests on flue-less outlets, pipe surface temperature measurement, wireless on-site printing, and combustible gas leak detection. This is all in addition to the impressive measurement capabilities of the TPI 709R Flue Gas Analyser which measures CO and O2 in flue gas, ambient carbon monoxide, temperature and pressure. Using built-in software, the analyser can also calculate tightness, efficiency, carbon dioxide concentration, CO/CO2 ratio, and excess air content.

    The TPI 719 Gas Leak Detector warns the user if it detects the presence of several different organic gases including methane, butane and natural gas. With a sensitivity of just 30ppm for methane, it is sure to keep the user safe in the event of a gas leak. Similarly, if dangerous CO concentration is detected through the GK11M air probe, the TPI 709R will not switch off and also provides a warning.

    Measurements are taken through four different probe types: the CPA1 probe set (for flue-less appliances), two CK21M pipe clamps (for pipe surface temperature), a flue probe, and the air probe, thus providing the user with a comprehensive set of readings.

    The clear, backlit screen on the TPI 709R displays all readings and these can also be saved to the device’s internal memory (max 50 data sets). Furthermore, hard copies can be printed on site with the A740 IR Printer through wireless infrared communication.

    Integrated dust and water filters in the flue probe help keep the analyser in good working order and TPI offers a six-year warranty as long as the 709R is serviced annually by an approved service centre.

    TPI part number: 709R-Kit 5

    Key Features

    • Ambient CO and flue CO measurement to 10000ppm
    • Oxygen measurement to 25%
    • Carbon dioxide calculation to 25%
    • CO/CO2 ratio calculation
    • Efficiency, tightness and excess air calculation
    • CPA1 probe set for flueless installations
    • Temperature measurement from -40˚C to 800˚C
    • Pressure measuruement from -150mBar to +150mBar
    • CK21M clamp probes for surface temperature measurment (-50˚C to 250˚C)
    • A740 Infrared Printer
    • 791 Gas Leak Detector
    • Internal memory
    • Dust and water filters
    • 6-hour battery life
    • 6-year warranty

    We offer the following kits for the TPI 709R:

     Standard KitKit 1Kit 2Kit 3Kit 4Kit 5Oil Kit
    TPI 709R Flue Gas Analyser
    A740 IR Printer  
    2 x CM21K Temperature Pipe Clamp Probes      
    CPA1 Probe Set          
    TPI 719 Gas Leak Detector          
    Oil filter            
    Smoke Pump            

     

    TPI 709R Kit Featured Contents

    • TPI 709R Flue Gas Analyser

    TPI 709R Kit 1 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer

    TPI 709R Kit 2 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps

    TPI 709R Kit 3 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • CPA1 Probe Set

    TPI 709R Kit 4 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • TPI 719 Gas Leak Detector

    TPI 709R Kit 5 Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • CPA1 Probe Set
    • 719 Gas Leak Detector

    TPI 709R Oil Kit Featured Contents

    • TPI 709R Flue Gas Analyser
    • TPI A740 IR Printer
    • Smoke pump
    • Oil filter
  • Specification

    Instrument

    • Operating Temperature Range: -10°C to +50°C (14°F to +122°F)
    • Battery / Battery Life: Rechargeable Ni-MH / > 6 Hours
    • Charger Input Voltage: 115V or 230V : 50/60 Hz AC
    • Fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite, Coal, Coke, Butane, Wood, Bagasse
    • Pressure Ranges: mbar, kPa & inH2O
    • Display: Backlit Graphic LCD
    • Data Storage: 50 sets of readings, multiple pages
    • Time and Date: 24 Hour Real Time Clock
    • Dimensions: 200mm (7.8”) x 90mm (3.5”) x  60mm (2.4”)
    • Weight: 500g
    • Casing: Rubber Boot as Standard
    • Switch Off: Failsafe
    • Exhaust: Safety Spigot
    • Conforms to: EN50379

    Flue Temperature Probe

    • Construction: Pistol Grip with Stainless Steel Shaft
    • Hose Length: 2500mm (8.2’)
    • Insertion Length: 200mm (7.9”)
    • ‘K’ Type Thermocouple Accuracy: +/- 0.3% of fullscale, +/- 1°C (2°F)
    • Maximum Temperature: 800˚C (1472°F) 

    Parameter: Oxygen / Carbon Monoxide / Carbon Dioxide (calculated) / CO/CO2 Ratio / Combustion Efficiency

    • Range: 0-25% / 0-10,000 ppm / 0-25% / 0-0.999 / 0-100%  
    • Resolution: 0.1% / 1 ppm / 0.1% / 0.001 / 0.1% 
    • Accuracy: +/- 0.3% / (<20ppm) +/- 3 ppm (>=100ppm) +/- 5% / Calculated / +/- 0.3%

    Pressure Measurement

    • Unit options: mbar, kPa and inH2O
    • Range: 150 mbar to + 150 mbar
    • Resolution: 0.01 mbar & 0.1 mbar

    CK21M Pipe Temperature Clamp

    • Max diameter: 30mm
    • Lead length: 1.5m
    • Measurement range: -50˚C to 250˚C

    TPI 719 Combustible Gas Detector

    • Gases detected: Methane, Natural Gas, Gasoline, Diesel, Propane (LPG), Butane, Kerosene
    • Sensitivity: 30ppm (CH4)
    • Sensor Type: Low power semiconductor
    • Probe Length: 16”
    • Leak Indication: Audio / Visual
    • Adjustable Tic Rate: Yes
    • Battery: “C” cell (2)
    • Weight: 500g
  • Supplied Accessories

    • TPI 709R Flue Gas Analyser
    • Rubber Boot (A765) 1 each installed on analyser
    • Soft Carrying Case (A768) – 1 each
    • Sampling Probe (c/w Type “K” Thermocouple)
    • In-Line Water Trap Bowl Filter (c/w Spare Particle Filter)
    • Battery Charger (A766)
    • Mini In-Line Pump Protection Filter (c/w 5 spare filters)
    • Exhaust Spigot Removable (A764)
    • Battery Charger (A766) – 1 each
    • Mini Pump Protection Filter Assembly (A763) – 1 each
    • Exhaust Spigot Removable (A764) – 1 each
    • Pressure Tubing (2 x 1 metres)
    • GK11M Air Probe
    • Instruction Manual
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • CPA1 Probe Set
    • 719 Gas Leak Detector
  • Product Documents

    Product Attachments

    View FileTPI 709R Datasheet    Size: (661.39 KB)
  • Product Questions

    Please Sign in or Create an account to post a question.

    There are no entries.

  • Reviews

    There are currently no reviews for this product. If you have previously purchased it please leave a review using our quick and easy form to the right.

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

  • Delivery Information

    At Test-Meter.co.uk we understand the importance of a reliable delivery service when shopping online. Especially when the goods are often essential to your working day. If your goods are required by a certain date please feel free to contact us for an honest and realistic indication whether this can be met. We aim to process all orders we receive within 1 to 3 working days, however from time to time we do have an increased demand for certain products or there might be delays from the manufacturer. In such cases delivery of your equipment may be subject to a minor delay.

    We use DPD/Interlink for all larger items and Royal Mail for smaller items and accessories. With DPD/Interlink you will receive a 1 hour delivery window on the day of delivery via e-mail/text and a notification 15 minutes before arrival so you will not have to wait around all day. You can even manage your booking online and re-arrange delivery for another date or arrange the goods to be left with a neighbour of your choice.

    We also offer delivery options for goods required urgently on certain products, all which are sent by DPD/Interlink.

    Our charges for UK deliveries:

    • FREE Delivery (on select products only): typically 3-5 working days*
    • Standard Delivery at £4.95: 2-3 working days
    • Next Working Day Delivery (on select products only) at £7.50
    • Pre-Noon Next Working Day Delivery (on select products only) at £9.50*
    • Pre-10.30am Next Working Day Delivery (on select products only) at £18.50*
    • Saturday Pre-Noon Delivery (on select products only) at £14.50*
    • Sunday Pre-Noon Delivery (on select products only) at £14.50*

    *UK mainland only

    NOTE! For next working day or Saturday/Sunday delivery options the order MUST be placed no later than 3pm on the working day before delivery is required. After 3pm, please arrange with our staff before selecting a priority delivery service. Priority services are available to UK mainland residents only (this might exclude certain areas in the north of Scotland).

    Customers outside the UK:

    Test-Meter.co.uk exports to many countries all over the world. Prices for shipping vary on location and weight/dimensions. Costs are calculated for certain countries at the checkout. If your country is not included in this list please e-mail admin@test-meter.co.uk with your name, address and the items you would like to order for an accurate shipping quote or go to http://www.test-meter.co.uk/test-equipment-export for more information.

    For more information on delivery, please see our terms and conditions.