NHS & School Discounts Available: Please call for more information.

TPI 717R Flue Gas Analyser Kit 5

Be the first to review this product

  • TPI 719 Gas Leak Detector for sensing dangerous organic gases
  • Measures temperature, pressure, carbon monoxide concentration and oxygen
  • CK21M pipe clamp probes make use of differential temperature function

rrp £645.00

now £516.00 (Ex. VAT) £619.20 (Inc. VAT)

rrp £645.00

OR

Please select a free gift below.

Choose Your Free Gift (please tick below)
  • Description

    TPI 717R Flue Gas Analyser Kit 5

    For a limited time only, get 20% off the TPI 717R Flue Gas Analyser Kit 5.

    The TPI 717R Flue Gas Analyser Kit 5 contains the adaptable TPI 717R alongside several useful accessories which include an A740 IR printer, two CK21M pipe clamp temperature probes, a CPA1 probe set for flue-less appliances, and a TPI 719 gas leak detector for hydrocarbon gas detection.

    The analyser itself measures several different parameters including oxygen level, carbon monoxide level, temperature, and pressure. Differential pressure and temperature calculation on the TPI 717R allows advanced analysis of combustion system performance whilst the calculation system can provide values for CO2, CO/CO2 ratio, efficiency and excess air content. There are also options for timed tightness tests and timed ambient CO build-up tests. The CPA1 probe set allows measurement on flue-less installations.

    Both the TPI 717R and 719 contribute to maintaining a safe working environment. The analyser can measure ambient CO levels and will not shut down when dangerous concentrations are detected whilst the gas leak detector can sense a wide range of organic gases and has extremely high sensitivity.

    Results are shown on the analyser’s clear, backlit display which also gives a countdown to the next service due date when the TPI 717R is switched on. A maximum of 100 data sets can be saved to the internal memory and then wirelessly transferred to the infrared printer for printing on site.

    Water and dust filters in the flue gas probe help prevent ingress into the analyser and it is also protected by tough rubber-boot cladding. With a six-year warranty, the TPI 717R is an analyser you can rely on and it is perfectly supplemented by the accessories contained in Kit 5.

    TPI part number: 717R-Kit 5

    Key Features

    • O2 range: 0 to 25%
    • CO range: 0 to 10000ppm
    • CO2 range: 0 to 25%
    • Temperature range: -40˚C to 800˚C
    • Pressure range: -150mBar to +150mBar
    • Differential pressure/temperature
    • Efficiency & excess air calculation
    • Tightness/let by testing
    • Ambient CO measurement
    • Gas leak detector
    • Wireless infrared printer
    • CPA1 probe set for flue-less appliances
    • 2 x CK21M pipe clamp temperature probes
    • 6-year warranty

    We offer the following kits for the TPI 717R:

     Standard KitKit 1Kit 2Kit 3Kit 4Kit 5Oil Kit
    TPI 717R Flue Gas Analyser
    A740 IR Printer  
    2 x CM21K Temperature Pipe Clamp Probes      
    CPA1 Probe Set          
    TPI 719 Gas Leak Detector          
    Oil filter            
    Smoke Pump            

     

    TPI 717R Kit Featured Contents

    • TPI 717R Flue Gas Analyser

    TPI 717R Kit 1 Featured Contents

    • TPI 717R Flue Gas Analyser
    • TPI A740 IR Printer

    TPI 717R Kit 2 Featured Contents

    • TPI 717R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps

    TPI 717R Kit 3 Featured Contents

    • TPI 717R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • CPA1 Probe Set

    TPI 717R Kit 4 Featured Contents

    • TPI 717R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • TPI 719 Gas Leak Detector

    TPI 717R Kit 5 Featured Contents

    • TPI 717R Flue Gas Analyser
    • TPI A740 IR Printer
    • 2 x CK21M Pipe Clamps
    • CPA1 Probe Set
    • 719 Gas Leak Detector

    TPI 717R Oil Kit Featured Contents

    • TPI 717R Flue Gas Analyser
    • TPI A740 IR Printer
    • Smoke pump
    • Oil filter
  • Specification

    Carbon Monoxide (CO) Measurement

    • Range: 0 to 10,000 ppm
    • Resolution: 1 ppm
    • Accuracy: <20 ppm : ± 3ppm; >100 ppm : ± 5%

    Oxygen (O2) Measurement

    • Range: 0 to 25%
    • Resolution: 0.1%
    • Accuracy: ±0.3% 

    Carbon Dioxide (CO2)

    • Range: 0 to 25%
    • Resolution: 0.1%
    • Accuracy: Calculated

    Ratio (CO/CO2)

    • Range: 0 to 0.999
    • Resolution: 0.001
    • Accuracy: Calculated 

    Gross/Net Efficiency

    • Range: 0 to 100%
    • Resolution: 0.1%

    Temperature Measurement

    • Range: -40° to 800° C (-40° to 1472° F)
    • Resolution: 1°C or F
    • Accuracy (K-type): ±0.3%, ±1°C or ±2°F

    Draft/Pressure Measurement

    • Selectable Ranges: mBar,kPa, and inH2O
    • Range: -150 mBar to +150 mBar
    • Resolution: 0.01mBar
    • Accuracy: ±0/5% fsd 

    Instrument Specifications

    • Operating Temperature Range: -10° to 50°C
    • Battery: Rechargeable Ni-MH, >6 Hour Life
    • Charger Input Voltage: 115V or 230V; 50/60 Hz AC
    • Fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood (Dry), Bagasse, Wood Pellet
    • Display Backlit: LCD
    • Data Storage: 100 sets
    • Time & Date: 24 Hour Clock
    • Dimensions: 200 x 90 x 60mm
    • Weight: 500g
    • Conforms To: EN50379 / BS7967

    TPI 719 Combustible Gas Detector

    • Gases detected: Methane, Natural Gas, Gasoline, Diesel, Propane (LPG), Butane, Kerosene
    • Sensitivity: 30ppm (CH4)
    • Sensor Type: Low power semiconductor
    • Probe Length: 16”
    • Leak Indication: Audio / Visual
    • Adjustable Tic Rate: Yes
    • Battery: “C” cell (2)
    • Weight: 500g
  • Supplied Accessories

    • TPI 717R Flue Gas Analyser
    • Flue Temperature Probe
    • ‘K’-Type Temperature Air Probe GK11M
    • In-Line Water Trap Bowl Filter Complete
    • Mini Pump Protection Filter Assembly
    • Battery Charger
    • Protective Boot
    • Soft Carrying Case
    • Exhaust Spigot
    • TPI A740 IR Printer
    • 2 x TPI CK21M Pipe Clamp Temperature Probes
    • TPI 719 Gas Leak Detector
    • CPA1 probe set
  • Product Documents

    Product Attachments

    View FileTPI 717R Datasheet    Size: (414.05 KB)
  • Product Questions

    Please Sign in or Create an account to post a question.

    There are no entries.

  • Reviews

    There are currently no reviews for this product. If you have previously purchased it please leave a review using our quick and easy form to the right.

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

  • Delivery Information

    At Test-Meter.co.uk we understand the importance of a reliable delivery service when shopping online. Especially when the goods are often essential to your working day. If your goods are required by a certain date please feel free to contact us for an honest and realistic indication whether this can be met. We aim to process all orders we receive within 1 to 3 working days, however from time to time we do have an increased demand for certain products or there might be delays from the manufacturer. In such cases delivery of your equipment may be subject to a minor delay.

    We use DPD/Interlink for all larger items and Royal Mail for smaller items and accessories. With DPD/Interlink you will receive a 1 hour delivery window on the day of delivery via e-mail/text and a notification 15 minutes before arrival so you will not have to wait around all day. You can even manage your booking online and re-arrange delivery for another date or arrange the goods to be left with a neighbour of your choice.

    We also offer delivery options for goods required urgently on certain products, all which are sent by DPD/Interlink.

    Our charges for UK deliveries:

    • FREE Delivery (on select products only): typically 3-5 working days*
    • Standard Delivery at £4.95: 2-3 working days
    • Next Working Day Delivery (on select products only) at £7.50
    • Pre-Noon Next Working Day Delivery (on select products only) at £9.50*
    • Pre-10.30am Next Working Day Delivery (on select products only) at £18.50*
    • Saturday Pre-Noon Delivery (on select products only) at £14.50*
    • Sunday Pre-Noon Delivery (on select products only) at £14.50*

    *UK mainland only

    NOTE! For next working day or Saturday/Sunday delivery options the order MUST be placed no later than 3pm on the working day before delivery is required. After 3pm, please arrange with our staff before selecting a priority delivery service. Priority services are available to UK mainland residents only (this might exclude certain areas in the north of Scotland).

    Customers outside the UK:

    Test-Meter.co.uk exports to many countries all over the world. Prices for shipping vary on location and weight/dimensions. Costs are calculated for certain countries at the checkout. If your country is not included in this list please e-mail admin@test-meter.co.uk with your name, address and the items you would like to order for an accurate shipping quote or go to http://www.test-meter.co.uk/test-equipment-export for more information.

    For more information on delivery, please see our terms and conditions.