Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Fluke T150 Voltage/Continuity Tester

Fluke
SKU: FLUKT150
  • Audible, tactile and visual feedback of voltage detection results
  • Continuity testing, single-pole phase, phase rotation, resistance measurement
  • Exact values shown via LCD screen in addition to LED bar-graph display
More Info
In Stock - Available Next Day

"Buy a Fluke, get a FREE Fluke" promotion. Spend £150 or more on any qualified Fluke product(s) and claim a FREE Fluke gift!
[Click here to learn more] Offer is valid from 1st March to 31st August 2024.

Fluke T150 Voltage/Continuity Tester

The Fluke T150 Voltage/Continuity Tester is Fluke’s top-of-the-range two-pole voltage tester and detects voltage from 6 to 690V in addition to performing resistance measurement between 0 and 1999Ω and carrying out continuity testing. Other options for assessing electrical circuits include switched-load RCD testing and single-pole phase testing whilst a phase rotation indicator helps the user work out phase sequence in three-phase systems. Test results, including indications of detected voltage, are conveyed to the user via a range of media including vibration in the hand, a bright LED bar-graph display, and an audible buzzer.

The LED display gives a notional voltage for voltage and the buzzer sounds when continuity falls within set limits but the user can also use the Fluke T150’s integrated LCD screen to see exact readings for both voltage and resistance (0 to 1999Ω). This therefore means that the T150 functions as both a voltage detector and a voltmeter. Data hold allows the user to freeze readings on screen for further convenience. Current type for voltage is automatically detected by the device and relayed to the user via the LED display whilst high voltages trigger the warning light, thereby improving safety. The T150 automatically switches to voltage measurement mode if voltage is detected whilst the quick response time (<0.5s) gives the user near-instantaneous results.

The Fluke T150 has an integrated torch for working in poor light and the WearGuard insulation highlights damage to test leads. It is rated as Cat IV to 600V and Cat III to 690V whilst a self-test function safeguards accuracy. The T150 constitutes a very accurate voltage detector with several useful additional features.

Fluke part number: FLUKE T150

Fluke Voltage and Continuity testers

  Fluke T90 Fluke T110 Fluke T130 Fluke T150
Backlit LED Indicator ✔ ✔ ✔ ✔
Backlit LCD Digital Display     ✔ ✔
Continuity test- Visual Results ✔ ✔ ✔ ✔
Continuity test Audible Results ✔ ✔ With On/off ✔ With On/off ✔ With On/off
Vibration Indicator Under Load     ✔ ✔
Indication of Polarity ✔ ✔ ✔ ✔
Resistance Measurement       Up top 1999Ω
Switchable Load   ✔ ✔ ✔
Single pole Test for Phase Detection ✔ ✔ ✔ ✔
Rotary Tip Indicator   ✔ ✔ ✔
Probe Tip Protection ✔ ✔ ✔ ✔
Voltage Display with Discharged Batteries ✔ ✔ ✔ ✔
Electrical Torch Function   ✔ ✔ ✔
Wear/Indicator Test Lead Wire ✔ ✔ ✔ ✔
Voltage AC/DC 12V to 690V 12V to 690V 6V to 690V 6V to 690V
Continuity 0-400kΩ ✔ ✔ ✔ ✔
Frequency 0/40 to 400Hz ✔ ✔ ✔ ✔
Phase Rotation 100V to 690V ✔ ✔ ✔ ✔
Response Time (LED Indicator) <0.5s ✔ ✔ ✔ ✔
200 kΩ input impedance, Current draw 3.5 mA @ 690 V, Current draw 1.15 mA @ 230 V ✔ ✔ ✔ ✔
7 kΩ input impedance (with load buttons pressed)   Current draw 30 mA @ 230 V Current draw 30 mA @ 230 V Current draw 30 mA @ 230 V
Safety Rating CATII 690V/CATIII 600V CAT III 690V, CAT IV 600V CAT III 690V, CAT IV 600V CAT III 690V, CAT IV 600V
IP Rating IP54 IP64 IP64 IP64

Key Features

  • Automatically detects voltages greater than 6V
  • Nominal voltage indication through LED bar-graph display
  • LCD screen gives exact readings and other information
  • Exact readings for voltage (6-690V) and resistance (0-1999Ω)
  • Continuity testing with buzzer between 0 and 400kΩ
  • Single-pole phase testing
  • Phase rotation indication
  • Automatically detects whether voltage is AC or DC
  • Tactile, visual and audible feedback
  • Warning signals for high voltage
  • Cat IV to 600V, Cat III to 690V
  • WearGuard clearly shows insulation damage
  • Data hold
  • Self-test function

What's In The Box?

  • Fluke T150 Voltage/Continuity Tester
  • Fluke T150 Voltage/Continuity Tester instruction sheet
  • Probe tips
  • 2 x AAA batteries
Specification
  • AC/DC voltage range: 12V to 690V
  • Continuity range: 0 to 400kΩ
  • Frequency: 0/40 to 400Hz
  • Phase rotation: 100 to 690V
  • Resistance range: 0 to 1999Ω
  • Response time: <0.5s
  • 200kΩ input impedance: Current draw 3.5mA @ 690V; current draw 1.15mA @ 230V
  • 7kΩ input impedance (with load buttons pressed): Current draw 30mA @ 230V
  • Safety rating: Cat III 690V / Cat IV 600V
  • IP rating: IP64
  • Batteries: 2 x AAA
  • Net weight: 280g
  • Dimensions (L x W x H): 260 x 70 x 38mm