Metrel A1532XA Electric Vehicle Charging Station Adaptor
The Metrel A1532XA EV Adaptor is a compact, lightweight instrument designed for EVSE construction and testing. This version of the adaptor is compatible with 3-phase load testing up to 13A and alternate error types such as PE open. Alongside supported Metrel installation testers, the A1532XA is used to verify electrical safety and the functional testing of EVSE. When testing Mode 3 EV supply equipment with a type 2 connector, if used in conjunction with Metrel AutoSequences, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with the simple press of a button.
With banana socket outputs, the Metrel A1532XA is easy to connect to 3-phase installation testers. For simulating the presence of an EV cable and detecting current rating, a Proximity Pilot resistance option is included with the adaptor. Alternatively for simulation of electric vehicle status the A1532XA also features a Control Pilot resistance selector. Fault simulation of Diode short, PE-CP short and PE open is built-in as is an output BNC connector for CP signal monitoring. A socket for connection to a 1-phase installation tester (Phase 1, Neutral, PE) is included in addition to a Type 2 Male Plug connector for connection to EVSE.
The Metrel EV adaptor supports a functional test, EVSE Auto Sequence and 6 mA EV RCD testing. Utilising the Metrel Electrical Safety Manager Software, the A1532XA can be utilised to create professional station-based reports.
Standards Applied
The following standards are applied to the Metrel A1532XA EV Adaptor:
Building LV Installation
- EISinsp Competences: Low Voltage Electrical Installation Safety Inspection
- EISc Competences: Low Voltage Electrical Installation Safety for Contractors and Maintainers
- IEC/EN 61557 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - series
Electrical Vehicle Supply Equipment
- EVSE Competences: Electrical Vehicle Supply Equipment Safety
- IEC/EN 61851 Electric vehicle conductive charging system
Supported Instruments
|
A1352 XA EVSE |
EV RCD |
EV RCM |
Zs: no EV RCD Trip |
Functional Inspections |
EVSE Auto Sequences |
EVSE Report |
MI 3155 EurotestXD |
✔ |
✔ |
✔ |
✔ |
✔ |
✔ |
✔ |
MI 3152 EurotestXC |
✔ |
✔ |
✔ |
✔ |
✔ |
✔ |
✔ |
MI 3152H EurotestXC 2,5 kV |
✔ |
✔ |
✔ |
✔ |
✔ |
✔ |
✔ |
MI 3102 BT EurotestXE |
✔ |
✔ |
- |
- |
- |
- |
✔ |
MI 3102H BT EurotestXE 2,5 kV |
✔ |
- |
- |
- |
- |
- |
✔ |
MI 3125 BT Eurotest COMBO |
✔ |
✔ |
- |
✔ |
- |
- |
✔ |
MI 3100 SE EurotestEASI |
✔ |
- |
- |
- |
- |
- |
- |
MI 3100 s EurotestEASI |
✔ |
- |
- |
- |
- |
- |
- |
MI 3125 EurotestCOMBO |
✔ |
- |
- |
- |
- |
- |
- |
MI 3105 EurotestXA |
✔ |
- |
- |
- |
- |
- |
- |
MI 3101 EurotestAT |
✔ |
- |
- |
- |
- |
- |
- |
Key Features
- Voltage indicators on EVSE output
- Load testing
- Up to 13 A on socket (1 phase or on banana sockets) & 3 phase
- Banana socket outputs
- Proximity Pilot resistance selector
- Control Pilot resistance selector
- 1-phase installation tester socket output
- Type 2 Male Plug connector
- 6 mA EV RCD support
- Functional tests support*
- EVSE Auto Sequence suppor;*
- MESM report creation;**
- Fault simulation: Diode short, PE-CP short & PE open
- Output BNC connector
- Rated IP40
* Functional tests and Auto Sequence are supported only on the MI 3155 Eurotest XD, MI 3152 EurotestXC and MI 3152 H EurotestXC 2.5 kV testers.
** Report printing is only available via the MESM PC Software. The MESM license (P 1101) is to be purchased separately.
Metrel part number: A1532XA
Metrel A1532 and Metrel A1532XA EV Adaptor Comparison Table
|
A 1532 EVSE Adadpter |
A 1532 XA EVSE Adadpter |
Features |
EVSE Mode |
✔ |
✔ |
AUTOSEQUENCES |
✔ |
✔ |
EVSE Measurements |
Proximity Pilot 0-64 A |
✔ |
✔ |
Control Pilot States Settings |
✔ |
✔ |
Line Impedance for Charging Station |
✔ |
✔ |
Fault Loop Impedance for Charging Station |
✔ |
✔ |
Functional Test of Proximity Pilot |
✔ |
✔ |
Functional Test of Control Pilot |
✔ |
✔ |
Isolation Test for Charging Station |
✔ |
✔ |
1-Phase Charging Station Testing |
✔ |
✔ |
1-Phase Test Through Socket |
✔ |
✔ |
3-Phase Charging Station Testing |
✔ |
✔ |
Diode Short Error Simulation |
- |
✔ |
PE Open Error Simulation |
- |
✔ |
CP Short Error SImulation (E State) |
- |
✔ |
Load Test up to 13 A |
- |
✔ |
Building Facilities |
EVSE Construction and Testing |
✔ |
✔ |
Standards Applied Building LV Installation |
EISinsp Competences: Low Voltage Electrical Installation Safety Inspection |
✔ |
✔ |
EISc Competences: Low Voltage Electrical Installation Safety for Contractors and Maintainers |
✔ |
✔ |
IEC/EN 61557 Electrical Safety in Low Voltage Distribution Systems up to 1000V AC and 1500V DC - Equipment for testing, measuring or monitoring of protective measures - series |
✔ |
✔ |
Standards Applied Electrical Vehicle Supply Equipment |
EVSE Competences: Electrical Vehicle Supply Equipment Safety |
✔ |
✔ |
IEC/EN 61851 Electric Vehicle Conductive Charging System |
✔ |
✔ |