Kewtech Kewprove 3 Proving Unit

SKU: KEWTKEWPROVE3
An ideal way to prove whether your voltage indicators and detectors are working correctly. Proving units are an electricians essential safety device
More Info
Due to ship late May

Kewtech Kewprove 3 Proving Unit

Small and portable proving unit which outputs 690V AC/DC, using just two contact points for AC and DC voltages. This unit will enable you to verify your voltage testers and detectors on site.

Kewtech Kewprove 3 Key Features:

Important Information

The KEWPROVE Proving unit puts out a hazardous voltage and must only be used by a qualified person and in accordance with the manufacturers instruction supplied with the unit.

Specification

How to use

  • Test your voltage detector on the proving unit, by placing the probes into the front terminals.
  • The neon on the proving unit should light up and your voltage detector should indicate voltage.
  • Test on the circuit to be tested.
  • Prove your voltage detector is still working by placing the probes into the front terminals again.
  • The neon on the proving unit should light up and your voltage detector should indicate voltage.
  • Output voltage: 180V into 6.8KΩ, 720V - 820V into 10MΩ
  • Batteries: 6 x AA
Kit Option
Kewtech ELC800 Voltage Detection Kit
£129.00
Due to ship late May
Kit Option
Kewtech ELC900 Voltage Detection Kit
£149.00
Due to ship late May
Kit Option
Kewtech ELC100 Voltage Detection Kit
£115.00
Due to ship late May