Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

FLIR IRP-1 Infrared Inspection Window for 80 Degree Lens

FLIR
SKU: FLIRIRP1
  • Enhances electrical inspection safety by allowing thermal imaging without opening cabinets, reducing arc flash risk
  • The FLIR IRP-1 speeds up predicative maintenance by eliminating the need for PPE and removal of panels in inspection
  • Compatible with FLIR 80° lenses, and supports compliance with a number of standards for efficient, cost-efficient inspections
More Info
Typically ships in 7-10 working days

FLIR IRP-1 Infrared Inspection Window for 80 Degree Lens

The FLIR IRP-1 Infrared Inspection Window has been designed to improve worker safety and the efficiency of electrical inspections, all while reducing the installation costs that are typically associated with using thermal cameras to inspect indoor electrical cabinets. The IRP-1 is designed to support a quick and precise connection when combined with a FLIR 80° lens, with the lens-free port allowing technicians to survey switchgear and other enclosed equipment. The Infrared Inspection Window allows for this to happen without the need to open the cabinet, which greatly reduces the risk of an arc flash injury.

The FLIR IRP-1 allows for technicians to perform predictive maintenance inspections faster, which greatly reduces the time needed to undertake tasks such as equipping PPE, removing and replacing electrical panels, and adjusting thermal camera settings to account for IR windo transmission. The IRP-1 helps companies comply with electrical codes, such as NFPA 70B, allowing them to meet regulations without added expense.

FLIR part number: IRP-1

Key Features

  • Allows direct thermal imaging of electrical components without removing panels or adjusting for window transmission
  • Enables safe inspections without opening electrical cabinets, reducing potential for arc flash incidents
  • MInimises installation time and cost, especially when paired with a FLIR 80° wide-angle lens
  • Speeds up routine inspections by removing the need for PPE and panel access
  • Helps meet NFPA 70B requirements and supports safer, regulation-compliant maintenance practices
Specification

Imaging & Optical

  • Viewing Aperture Area - 123 mm² (0.1885 in²)
  • VIewing Aperture Diameter - 12.5 mm (0.49 in)
  • Visible Light Spectrum – No certification

Environmental & Certifications

  • Certifications – CE, UL (UL50V), IP67
  • Maximum Operating Temperature - 100°C/212°F
  • NEMA Environment Type - Standard 250
  • Storage Temperature Range - Maximum: 100°C/212°F

General

  • Body Material -
    Body: Plastic (PC/PBT)
    Cover: Anodized aluminium
    Hardware – Stainless steel
  • Required Hole Diameter (Nominal) – 21mm 0.827in)
  • Size – 19 x 84 x 104mm (0.75 x 3.3 x 4.1in)