Electrical Installation Tester Hire

Showing 13 Items

  1. Features:

    • 15mA and 200mA Continuity
    • Insulation resistance 100, 250, 500 and 1kV
    • Patented 2 wire anti-trip loop test
    • Tests 3 phase and Type B RCDs
    • Conducting line to line loop tests,
      confirming phase sequences
    • Suitable for single and 3-phase
      installation testing

    £59.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    The Megger MFT1721 Multifunction Tester is suitable for maintaining and certifying single and three phase electrical installations in order to ensure compliance with Part P of the building regulations and the IET 18th edition wiring regulations (BS7671).

    Capable of conducting line to line loop tests, confirming phase sequences and testing 3 phase RCDs, the Megger MFT1721 multifunction tester is ideal for certifying three phase electrical installations. Moreover, the MFT 1721 is one of a handful of installation testers capable of testing specialist type B RCDs commonly found protecting temporary generator supplies and other DC installations.

  2. Features:

    • 15mA and 200mA Continuity
    • Insulation resistance 100, 250, 500 and 1kV
    • 2 and 3 wire Anti trip loop test
    • Auto RCD and ramp test including 3 phase
    • PSC/PFC 
    • Phase rotation and earth resistance (ART and Stakeless measurements available with optional clamps*)

    £69.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    The newest and most advanced multifunction tester within Megger’s range, the MFT1731 caters for all natures of BS7671 electrical inspection and testing. Featuring two continuity modes, a wide range of insulation resistance tests and Auto RCD testing including ‘B’ type RCDs, the MFT1731 is also capable of conducting 2 pole, 3 pole, stakeless and ART earth resistance measurements.

    *Megger iClamp and vClamp required for stakeless and ART earth testing available upon request for an additional £75+VAT per week

  3. Features:

    • Fluke Connect & FlukeCloud connectivity via smartphone
    • Insulation test voltages of 50V, 100V. 250V, 500V & 1000V
    • Measures AC voltage, insulation resistance, loop and line impedance
    • Auto-test function for efficiency
    • PreTest feature detects appliances to avoid damage
    • CAT III to 500V, Cat IV to 300V overvoltage protection rating

    £69.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    The Fluke 1664FC Multifunction Tester is the only tester with an insulation PreTest feature, enabling it to stop insulation tests and provide warning if the unit detects an appliance connected to the system. This feature can be crucial for avoiding costly damage to customers’ peripheral appliances. In addition, this multifunction tester can read True-RMS AC voltage, insulation resistance, loop and line impedance, prospective earth fault current, RCD tripping speed, earth resistance and RCD/FI tripping current. The 166FC is a well-rounded instrument with multiple impressive features and modes.

  4. Features:

    • 15mA and 200mA Continuity
    • Insulation resistance 100, 250, 500 and 1kV
    • 2 and 3 wire Anti trip loop test
    • Auto RCD and ramp test including 3 phase
    • For EVSE Testing using 6mA DC charge point test
    • Confidence meter for assessing loop measurements

    £79.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    The Megger MFT1741+ Multifunction Tester is an upgraded version of the popular Megger MFT1741, capable of fully automatically testing 6mA DC RCDs. This makes it the perfect all-in-one solution for not only testing domestic, commercial and industrial low voltage electrical installations, but in addition to the standard MFT1741 the MFT1741+ also tests electric vehicle charging stations (EVSE) in compliance with the 18th Edition of the wiring regulations.

    • Earth loop impedance and 7mA or 200mA continuity test functions
    • Insulation resistance tests with output voltage between 50-1000VDC
    • Includes Metrel A1401 Tip Commander Probe
    • Includes S 2026 20m earth test kit with spikes
    • Large, colour touch screen user interface
    • Suitable for all scopes of electrical installation testing

    £89.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    Testing with the MI3152 can be as exclusive as conducting a one-off diagnostic test, or as inclusive as programming the instrument with specific test sequences. The unit caters for the ‘Part-P’ registered domestic electrical installer, completing tasks such as occasional minor works, installation certificates or perhaps a frequent electrical installation condition reports. With built in help screens and BS7671:2008 amendment 3 fuse tables governing a pass/fail indication for loop test measurements, the Metrel MI3152 is a rapid and easy-to-use instrument suitable for all scopes of electrical contractor.

  5. Features:

    • Megger MFT1741+ & EVCA210-UK Electric
      Vehicle Charge Point Adaptor
    • Compatible with all single and 3-phase
      electric vehicle charging points
    • 2 and 3 wire Anti trip loop test
    • Auto RCD and ramp test including 3 phase
    • For EVSE Testing using 6mA DC charge point test
    • Confidence meter for assessing loop measurements

    £89.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    The Megger EV Test Kit 1 comes complete with a Megger MFT1741+ Multifunction Electrical Installation Tester and a Megger EVCA210-UK Electrical Vehicle Charger Adaptor. This MFT is the upgraded version of the 1741 model and an ideal all-in-one solution fully capable of automatically testing 6mA DC RCDs alongside testing electric vehicle charging stations (EVSE), all in compliance with the IET 18th edition. The EVCA210-UK Adaptor is a compact instrument with a wide array of functions for thoroughly testing Mode 3 AC Electric Vehicle charge points be they single or three phase EV charging stations.

    The Megger EVCA210-UK Electric Vehicle Charge Point Adaptor is built to simulate the connection between an electrical vehicle and a charging point currently under test. Supplied with both Type 1 plugs for charging points with fixed cables & vehicle connectors and Type 2 plugs for fixed cables with vehicle connectors or charging points featuring panel mounted socket outlets.

  6. Features:

    • Auto ranging 200mA Continuity tests
    • Insulation resistance 100, 250, 500 and 1kV
    • Anti trip Loop testing on all types of RCD
    • Automatic RCD Test at 30mA/li>
    • PSC/PFC tests

    £49.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    The Kewtech KT63DL Multifunction 5 in 1 Tester packs an array of features into a simple, user-friendly system ideal for testing and certifying both domestic and commercial electrical installations. The device is capable of insulation testing up to 1000V with an auto discharge function, auto ranging continuity measurements up to 2000Ω and full no trip Loop testing on all types of RCD.

    PSC/PFC results are displayed simultaneously with loop impedance and new anti-trip loop testing technology which when combined with continuous live monitoring, ensures no bangs during testing including throughout the auto test for RCDs up to 30mA. These results include a low susceptibility to RCD uplift and noise interference for maximum reliability, a ramp test function is also incorporated.

  7. Features:

    • RCD-LOC XLT non-trip loop test
    • Insulation test at 250V, 500V and 1kV
    • 200mA continuity test
    • Auto RCD testing for time and current
    • PSC/PFC testing
    • Phase rotation and socket polarity testing

    Please note: Free gifts with purchase units only, not available for hire.

    £59.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    Dilog's flagship multifunction tester, this durable, UK-made unit offers a full range of installation test functions including loop/line testing, PFC/PSC testing, RCD trip current and trip time testing, phase rotation testing, socket polarity testing, insulation testing and much more. It has a no-trip loop test function and comes supplied with a remote probe and neck harness for ease of use.

  8. Features:

    • Continuity
    • Insulation resistance 100, 250, 500 and 1kV
    • Anti trip loop test
    • Auto RCD and ramp test
    • PSC/PFC 
    • Phase rotation

    £59.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    The Metrel MI3000 is our most popular multifunction tester and a firm favourite with electrical installers. It provides a wide range of 18th Edition and Part P tests including continuity, insulation up to 1000V, auto RCD and phase rotation testing. Complete with onscreen help diagrams and voltage protection on all test ranges, the MI3000 works well on both single and three phase installations in domestic and commercial environments.

  9. Features:

    • High resolution loop test up to 0.001 Ohms
    • Advanced memory system for detailed storage of tests
    • Fuse ratings in line with IET Wiring Regulations BS 7671:2008(2011)
    • RCD Auto Test: 10, 30, 100, 300, 500 & 1000 mA
    • Earth resistance test

    £79.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    The Kewtech KT65DL is an impressively versatile multifunction tester, suitable for all BS7671:2008 (17th Edition) and Part P electrical installation applications. This model features all of the tests needed for both domestic and industrial electricians working on multi-phase circuits. Some of these features include a high resolution loop test, capable of displaying as low as 0.001 Ohms and a fuse rating function, able to provide pass/fail limits in accordance with IET Wiring Regulations BS 7671:2008 (2011). An advanced memory system enables the KT65 to store the test type, circuit, distribution board and site number for export to supplied Kewtech Kew report software, further adding to its convenience.

  10. Features:

    • Compatible with all single and 3-phase
      electric vehicle charging points
    • Testing adaptor for Mode 3 Electric
      Vehicle charge points (AC)
    • Performs PE Pre-Test, CP Error/PE Error simulations
    • Includes Type 2 & Type 1
      Charging plugs
    • Input voltage of up to 430V in a three phase system
    • Input voltage of up to 250V in a single phase system

    £39.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    Built to simulate the connection of an electrical vehicle to an under test charging point, the Megger EVCA210-UK adaptor is an EVSE tester which can determine if dangerous voltages are present on the PE. The intuitive user interface includes push buttons and a tactile rotary dial for streamlined testing.

    Alongside the PE pre-test button feature, a CP Error "E" simulation imitates an error on the control pilot circuit whilst a PE Error simulation (Earth Fault) feigns a disconnect of the PE circuit. The rotary switch alternates between providing Proximity Pilot (PP) State simulation and Control Pilot (CP) state simulation.

  11. Features:

    • Megger MIT330 Continuity/Insulation Tester
    • Megger LTW335 Loop Tester
    • Megger RCDT330 RCD Tester
    • Insulation resistance 250, 500 and 1kV
    • Anti trip loop test
    • Auto RCD and ramp test

    £59.00 + VAT per week

    Excludes £10 carriage charge each way (collection optional)

    This kit includes a Megger Insulation & Continuity Tester, 2-wire Loop Tester and an RCD Tester, providing users with everything needed to perform electrical inspections on domestic, commercial and industrial installations for single and three phase applications. Each tester has the capacity for storing results which can be downloaded to a PC however additional Powersuite software is required for producing certificates and reports. The instruments are all built to last in rubber armoured housing and all three come supplied within a single briefcase for easy transportation.

  12. Features:

    • 2 and 3 pole earth tester - ART method optional*
    • Electrical noise filter
    • 0.01Ω to 2000Ω range
    • Automatic C and P spike check
    • Selectable 25V or 50V output
    • Supplied with lead and ground stake kit

    £90.00+VAT
    PER WEEK 

    Excludes £10 carriage charge each way (collection optional)

    A simple to use earth resistance tester capable of checking ground resistances between 0.01Ω to 2000Ω. Featuring a 25V or 50V output, the Megger DET3TC is suitable for a range of testing applications including earth rod tests, lightning system tests and general ground resistance checks. With an inbuilt electrical noise filter capable of rejecting noise of up to 40V, the DET3TC can provide accurate measurements, even in noisy environments such as substations and plant rooms.

    *Megger iClamp available for ART testing upon request for an additional £35+VAT per week

Showing 13 Items