Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

FLIR TG54-2 Spot IR Thermometer

FLIR
SKU: FLIRTG542
  • Distance to spot ratio of 20:1
  • Maximum IR temperature measurement of 850ºC (1562ºF)
  • Class II laser sighting with built-in work light
More Info
In Stock - Available Next Day

FLIR TG54-2 Spot IR Thermometer

The FLIR TG54-2 Spot IR Thermometer provides non contact temperature readings in both electrical and mechanical inspections. Using the FLIR TG56-2 users can monitor equipment before it fails and ensure energy efficiency in building inspections. With a distance to spot ratio of 20:1, the FLIR TG54-2 uses infrared technology detect a maximum IR temperature measurement of 850ºC (1562ºF) with an accuracy of 0°C to 100°C (32°F to 212°F): ±1.0°C (±1.8°F). With an integrated Class II laser sighting, the FLIR TG54-2 uses a single point laser at the upper edge of the target with built-in bright work light helps to locate a target area even in dark work environments.

The FLIR TG54-2 has a user defined alarm with high and low alarms displayed on the 1.57" colour screen. The thermometer is powered by a 9V alkaline battery that provides u p to eight hours of continuous use. Auto power off after 5 or 15 seconds helps to preserve the battery life. Temperature measurements are stored on the device with 2 x 99 data storage available. The TG54-2 has Emissivity of 0.01 to 1.00 with 5 presets and MIX/MAX/AVG/DIF displays.

The FLIR TG54-2 is IP65 rated offering protection from water ingress and has been drop tested to withstand a drop from 3m (9.8ft).

Key Features

  • Spot infared thermometer
  • Measure non contact surface temperature measurements
  • Measure temperature up to 850ºC
  • Basic Accuracy: 0ºC to 100ºC (32ºF to 212ºF): ±1.0°C (±1.8°F)
  • Distance to spot ratio 20:1
  • Class II laser
  • Built-in work light
  • Emissivity: 0.01 to 1.00 with 5 presets
  • Colour screen
  • High/Low alarms
  • Max/Min: Min/Max/Avg/Dif
  • IP65 rated
  • 3m drop tested
  • Battery powered with up to eight hours continuous use

What's In The Box?

  • FLIR TG54-2 Spot IR Thermometer
  • 9V battery
  • Quick start guide
  • Storage pouch
Specification
  • Distance to spot ratio (D:S): 20:1
  • Basic Accuracy: 0ºC to 100ºC (32ºF to 212ºF): ±1.0°C (±1.8°F)
  • Emissivity: 0.01 to 1.00 with 5 presets
  • Display: 1.57" Colour EBTN

Imaging and optical:

  • IR Range: -30°C to 850°C (-22°F to 1562°F)
  • Laser orientation: Single point laser to upper edge of measurement
  • Laser power: ≤1mW, Class II
  • Resolution: 0.1C/0.1ºF
  • Spectral response: 8 µm to 14 µm

Measurement and analysis:

  • AVG: Last 20 readings
  • Basic accuarcy: 0°C to 100°C (32°F to 212°F): ±1.0°C (±1.8°F)
  • Differential (MAX/MIN): Yes
  • Distance to Spot Ratio (D:S): 20:1
  • Max/Min: Min/Max/Avg/Dif
  • Measurement Resolution: 0.1ºC/0.1ºF
  • Response: 250 Milliseconds

Communication and data storage:

  • Memory: 2 x 99 sets data storage

User interface

  • Display: 1.57" Colour EBTN

Power

  • Auto Power Off: 5 or 15 seconds (selectable)
  • Continuous Run Time: 8 hours maximum continuous temperature measurements
  • Power Source: 9V alkaline battery (included)

General

  • Alarm: High and low alarms with programmable set points
  • Alarm alert: Hi or Lo will; flash on display
  • Data logging: Manual and automatic data logger
  • Dimensions: 192mm x 94mm x 64mm (7.5in x 3.7in x 2.5in)
  • Includes: Spot IR Thermometer, 9V battery, Quick start guide and storage pouch
  • Locking system: Yes
  • Scanning Mode: Yes
  • Weight: 292g (10.3oz)
  • Work lights: Yes

Environmental and certifications

  • Certifications: CE, UKCA, RCM, WEEE and FDA
  • Drop Test: 3m (9.8ft)
  • Emissivity: 0.01 to 1.00 with 5 presets
  • IP rating: IP65
  • Warranty: Limited 3-year Warranty
Label Type Size Download
pdf FLIR TG54-2 Spot IR Thermometer Datasheet pdf 158.3 KB Download