Fluke 1555 FC 10kV Insulation Tester kit

Fluke 1555 FC 10kV Insulation Tester

With the Fluke 1555 FC 10kV Insulation Tester kit users are able to perform digital insulation testing up to 10kV and is designed to improve user safety and save time whilst installing high voltage equipment such as switchgear, motors, generators and cables. Data can be transferred to a smart device via the included IR3000FC Connector and downloadable FlukeConnect App. Included in the kit is a Fluke hard carry case (IP67 rated) and high voltage test leads. The Fluke 1555 is able to perform test voltage testing at selectable 50V steps from 250V to 1000V and 100V steps above 1000V. With wireless start/stop capability the user is able to work remotely ensure their safety at all times.

The Fluke 1555 allows users to measure a wide range of parameters such as capacitance from from 0.01μF to 15μF, leakage current from 1nA to 2mA and resistance measurements up to 2TΩ. The included guard systems allows for the filtering out of surface leakage current on high resistance measurements. Automatic calculation of Electric Absorption (DAR) and Polarisation Index (PI) can be automatically accessed without the need for additional setup.

Fluke Connect®

Through the Fluke Connect® App the 1555 is capable of storing, sharing and analysing data, allowing users to prevent and predict issues in maintenance programs to help identify potential equipment failures before they occur. Remote operation with stop/start capabilities, allows for testing in hazardous environments to be conducted safely. Reports can be generated with company logos using pre-designed templates.The IR3000FC Connector can be upgraded via USB.

Fluke IR3000FC Connector

Using the included Fluke IR3000FC Connector users are able to wirelessly transfer data from the Fluke 1555 to a smart device. Users are able to immediately graph, save and share any readings with other team members via a smart device using the Fluke Connect® App.

The Fluke 1555 has a long battery life that allows for up to 750 tests to be completed between charges and an internal memory of 99 memory locations allows users to store recordings with user defined labels, allowing easy recall once testing has been completed. Comprehensive results analysis is capable through the Fluke 1555's large LCD screen with both digital and analogue displays. The Fluke 1555 has a safety rating of CAT III 1000V and CAT IV 600V and is capable of conducting the entire range of test voltage specified in IEEE 43-2000. A warning function alerts users whether line voltage is present and gives the voltage reading up to 600V AC or DC for increased user safety.

Key Features

• Test Voltage to 10kV
• Automatic calculation of Dielectric Absorption (DAR) and Polarisation Index (PI) with no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance measurements
• Selectable test voltages in 50V steps from 250V to 1000V, and 100V steps above 1000V
• Includes a Fluke IR3000FC Connector allowing wireless transfer data from Fluke 1555 to a smart device
• Remotely stop/start testing using the Fluke Connect® App
• CAT III 1000V, CAT IV 600V safety rating
• Warning function alerts the user that line voltage is present and gives the voltage reading up to 600V AC or DC for increased user safety
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Large digital/analog LCD for easy viewing of test data
• Capacitance and leakage current measurement/li>
• Ramp function for breakdown testing
• Resistance measurements up to 2TΩ
• Timer settings up to 99 minutes for timed tests
• 3-year warranty