Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Fluke 190-202-III ScopeMeter Portable Oscilloscope 200MHz

Fluke
SKU: FLUKE190202-CONF
  • A 5.0GS/s sampling rate and a 200ps resolution is ideal for conducting testing that looks for troubleshooting issues
  • The Fluke 190-202-III has two scopes with can record and store up to 10,000 samples each for analysis and identification
  • Choose between the standard version of the product, or opt for a kit including a carry case, WiFi USB and FlukeView software
More Info

Fluke 190-202-III ScopeMeter Portable Oscilloscope 200MHz

The Fluke 190-202-III ScopeMeter has been expertly designed with high performance in mind, with the highest available safety ratings combined with versatility in a wide range of environments combining into an extremely effective testing tool. Suitable for a wide range of troubleshooting tasks, the ScopeMeter is able to highlight issues such as noise and disruption with a 5.0GS/s and 200ps resolution. The tool is also safe from water droplets, dust, humidity, and fluctuating temperatures thanks to an IP51 safety rating, which allows for use across a diverse range of challenging job sites. A high frequency measurement capability of 200MHz means that the Oscilloscope can measure more than other tools, with a gigasample per second rate of 5.0GS/s enhancing the tool into a requirement for industry professionals.

Created for use in the industrial electronics sector, you can be confident that the 190-202 can effectively troubleshoot on Sensors, Transducers, Motion Controllers, Rotary Encoders, Scanners, Readers and Printers. The high bandwidth of 200MHz, two scope inputs, and the ability to run advanced power measurements emphasises the versatility of this must-have tool. The 202 can hold around 20,000 samples across two scopes, which can then be analysed and compared in order to draw conclusions and find issues.

The Oscilloscope is also equipped with these exciting features:

  • Connect-and-View - this functionality enables precise triggering automatically by recognizing signal patterns. This triggering displays almost every signal, and also eliminates the need for a user to press a button.
  • TrendPlot - this serves as a digital recorder eliminating the need for paper and capable of storing data for up to 22 days, helping users in identifying intermittent faults. Typically, these faults can be challenging to find, but the ScopeMeter can locate and diagnose these issues.
  • ScopeRecord - the ScopeRecord memory can accommodate up to 30,000 or more data points per channel, adeptly capturing intermittent events and glitches as brief as 8 nanoseconds.

Fluke Connect-and-View

If the wrong settings are used on an oscilloscope, the wrong measurement data will be displayed which can severely impact the accuracy of results. Connect-and-View can recognise signal patterns, set up the correct triggering, and provide a stable and accurate display. The user can sit back as Connect-and-View automatically recognises signal changes.

Optional FlukeView

FlukeView can expand the power of Fluke's testing tools, by addressing the demands for reporting and documentation through documenting, storing, and the analysis of readings or measurements.

By selecting the kit option from the drop-down menu above, you will receive a code for the full version of FlukeView, which allows a user to edit an existing form or create a new form to customize the report to individual needs.

The 190-202-III Kit Option

The 190-202-III is supplied with a wide range of accessories, such as a Battery Charger/Mains Adaptor, BP290 Battery, and various test leads and clips that are listed in full below in the 'What's in the Box?' section. However, if you opt for the kit option, you will receive all of these accessories, plus a carry case, a code for FlukeView Software, and a Wi-Fi dongle.

Fluke Selection Guide - Decide What Is Best for You

Features 123 124 125 190-062 190-102 190-202 190-104 190-204 190-504
Bandwidth (MHz) 20 40 40 60 100 200 100 200 500
Scope Inputs 2 2 2 2 2 2 4 4 4
Dedicated DDM 2 2 2 1 1 1 - - -
Dual Input Trendplot ✓ ✓ ✓ ✓ ✓ ✓ - - -
Four Input Trendplot - - - - - - ✓ ✓ ✓
ScopeRecord Mode - - - ✓ ✓ ✓ ✓ ✓ ✓
Automatic Capture & Replay Mode - - - ✓ ✓ ✓ ✓ ✓ ✓
Cursors - ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Zoom - - - ✓ ✓ ✓ ✓ ✓ ✓
Bus Health Test Mode - - ✓ - - - - - -
Advanced Power Measurements     ✓ ✓ ✓ ✓ ✓ ✓ ✓
EN61010-1 CAT III Safety Rating 600V 600V 600V 1000V 1000V 1000V 1000V 1000V 1000V
EN61010-1 CAT IV Safety Rating - - - 600V 600V 600V 600V 600V 600V
Battery 7 hr NiMH 7 hr NiMH 7 hr NiMH 4 hr Li0Ion (8 hr Opt) 4 hr Li0Ion (8 hr Opt) 7 hr Li-Ion 7 hr Li-Ion 7 hr Li-Ion 7 hr Li-Ion
Optical RS-232 ✓ ✓ ✓ - - - - - -
Isolated USB Opt Opt Opt ✓ ✓ ✓ ✓ ✓ ✓
Isolated USB Memory - - - ✓ ✓ ✓ ✓ ✓ ✓

Fluke part number: 5282439/5282442

Key Features

  • CAT III 1000V/CAT IV 600V safety rated
  • 60MHz bandwidth
  • 5.0GS/s
  • 10,000 samples per channel waveform
  • Dedicated 5000 Count digital multimeter
  • Connect-and-View for automatic triggering
  • ScopeRecord mode that captures waveform sample data
  • TrendPlot offers trend measurement readings up to 22 days
  • Advanced automatic measurements of power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP51 rating
  • Li-Ion battery for extended operating time

What's In The Box?

Both the FLUKE-190-104-III and FLUKE-190-062-III-S are supplied with:
  • Fluke 190-202-III ScopeMeter
  • Battery Charger/Mains Adaptor
  • BP290 Battery
  • 2 x VPS410-x Probes (1 x red, 1 x blue)
  • 2 x Large Jaw Crocodile Clips (1 red, 1 blue)
  • 2 x TL175 Test Leads with Test Pins (1 red, 1 blue)
  • Hangstrap
  • Handstrap
  • Download Information for FlukeView-2 Demo Package
  • USB Interface Cable
The following things are only supplied should you opt for the S kit:
  • All the above, plus:
  • CXT293 Protective Carry Case
  • Activation Code for FlukeView Software
  • Wi-Fi Dongle
Specification
Input Voltage Range
  • Rated maximum floating voltage - CAT III 1000V/CAT IV 600V (maximum voltage between any contact and earth-ground voltage level)
  • Probe input voltage VPS410-II - CAT III 1000V/CAT IV 600V (maximum voltage between standard 10:1 probe tip and reference lead)
  • Probe input voltage VPS421 - CAT III 1000V/CAT IV 600V (maximum voltage between probe tip or reference lead to GND, 2000V max between probe tip and reference lead)
  • Maximum BNC input voltage - CAT IV 300V (maximum voltage on BNC input directly)
  • Maximum voltage on meter input - CAT III 1000V/CAT IV 600 V (safety designed banana input connectors)
Memory Save and Recall
  • Memory locations (internal) - 30 waveform memories plus 10 recording memories plus 9 screen copy memories
  • 30 waveform memories - Each memory can contain up to 2 or 4 waveforms plus corresponding setups
  • 10 recording memories - Each may contain: a 100 Screen Replay sequence, or a ScopeRecord Roll-mode recording (2 or 4 traces), or a TrendPlot recording of up to 4 measurements
  • External data storage - On PC, using FlukeView™-2 Software, or direct storage on external flash memory drive (maximum 32 GB) through USB host port
  • Screencopies - On PC, using FlukeView™-2 Software, or internally (in instrument) which can be copied on to external flash memory drive as .BMP-file, through USB host port
  • Volatility - Saving is done in non-volatile Flash-ROM and all data is secured, independent of battery or power status
  • Real-time clock - Provides date and time stamp information for ScopeRecord, for 100 Screen Replay sequences and for TrendPlot recordings
Case
  • Design - Rugged, shock-proof with integrated protective holster. Handstrap and hangstrap included as standard. Kensington lock supported to lock down instrument when left unattended
  • Drip and dust proof - IP51 according to IEC60529
  • Shock and vibration - Shock 30g, vibration (sinusoidal) 3g/ 0.03g2/Hz (Random), according to MIL-PRF-28800F Class 2
  • Display size - 133mm x 90mm (5.3in x 3.5in) LCD
  • Resolution - 1120 pixels x 765 pixels
  • Brightness - User-adjustable, up to 300 cd/m2
Mechanical Data
  • Size - 265mm x 192mm x 70mm (10.5in x 7.6in x 2.8in)
  • Weight (including battery) - 2.1kg (4.6lb)
Power
  • Line Power - Universal mains adapter/battery charger BC190/830 included, with detachable 2-wire power cords 100Vac to 240Vac, ±10 %, 50-60Hz
  • Battery Power - Re-chargeable Li-Ion battery (included). Battery swappable through easily accessible battery door at the rear of the instrument
  • Battery type (incl.) and capacity (+opt. battery) - BP290: 10.8V, 2500mAh, BP291: 5000mAh optional
  • Battery charge indicator - Battery has built-in status indicator for use with external charger, next to battery status indicator on instrument screen
  • Battery operating time (with backlight low) - Up to 3.5 using BP290 (included), up to 7 hours using BP291 (optional)
  • Battery charging time - 2 1/2 hours using BP290; 5 hours using BP291
  • Battery power saving functions - Auto ‘power down’ with adjustable power down time. Automatic ‘display off’ with adjustable power down time. On-screen battery power indicator
Safety
  • EN61010-1, Pollution Degree 2; IEC61010-2-030: CAT IV 600V/CAT III 1000V
Environmental
  • Operating temperature - Battery discharging: 0°C to 40°C (32°F to 104°F), Battery charging: 0°C to 40°C (32°F to 104°F)
  • Storage temperature - -20°C to 60°C (-4°F to 140°F)
  • Humidity - 0°C to 10°C (32°F to 50°F): noncondensing, 10°C to 30°C (50°F to 86°F): 95% (±5%), 30°C to 40°C (86°F to 104°F): 75% (±5%), 40°C to 50°C (104°F to 122°F): 45% (±5%)
  • Maximum operating altitude - CAT IV 600V, CAT III 1000V: up to 2000m (6,600feet), CAT IV 300V, CAT III 600V, CAT II 1000V: up to 4000m (13,000 feet)
  • Maximum storage altitude - 12km (40,000ft)
  • Electro-Magnetic Compatibility - IEC 61326-1: Industrial; CISPR 11: Group 1, Class A; Korea (KCC): Class A Equipment (Industrial Broadcasting and Communication Equipment): USA (FCC): 47 CFR 15 subpart C
  • Interfaces - Two USB-ports provided. Ports are fully insulated from instrument’s floating measurement circuitry. USB-host port directly connects to external flash memory drive (up to 32GB) for storage of waveform data, measurement results, instrument settings and screen copies. Alternatively, this USB-A port may be used to connect a WiFi. Adaptor for wireless PC connectivity. A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under PC-control using FlukeView-2.
  • Probe calibration output - Dedicated probe-cal output with reference contact provided, fully insulated from any measurement input channel. Generator Output: 1.225Vpp/500Hz square wave
  • Warranty - 3 years on main instrument, 1 year on battery and accessories