Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Fluke 190-502-III ScopeMeter Portable Oscilloscope 500MHz

Fluke
SKU: FLUKE190502-CONF
  • A sampling rate of 5.0GS/s and a resolution of 200ps makes the tool perfect for troubleshooting tasks and issues
  • The Fluke 190-502-III can gather around 20,000 accurate and important samples thanks to two in-built input channels
  • Choose between the standard version of the product, or opt for a kit including a carry case, WiFi USB and FlukeView software
More Info

Fluke 190-502-III ScopeMeter Portable Oscilloscope 500MHz

The Fluke 190-502-III ScopeMeter prioritises high performance and functionality to create an effective test tool, that can be deployed in a wide range of environments. Equipped with the highest available safety ratings (CAT III 1000V/CAT IV 600V), the 502 has two scope inputs and two channels, and can operate for up to seven hours when used with the supplied by BP291 battery. The scope is able to capture and display unknown waveform shapes, amplitudes, or disturbances, which allows the user to idetify issues and act on them. This is due to a 5.0GS/s and 200ps resolution, which makes identification simple yet effective. The tool is also IP51 rated, which offers protection against water droplets, humidity, dust, and fluctuating temperatures, which enhances its capabilities across a range of diverse job sites. The tool is also shock-proof and built to last under continuous usage.

Designed for use in manufacturing, field service, and equipment installation, the 190-502 can effectively troubleshoot on a range of equipment. A bandwidth of 500MHz means that the sample interval is faster, leading to more accuracy and detail in results. With two scopes and an in-built ability to run power measurements, the 502 proves a versatile and necessary tool for industry professionals. When the device is in 'Scope Mode', each channel is able to store up to 10,000 samples, meaning that the 502 can hold around 20,000 samples that can be later analysed and compared. This oscilloscope can run two automatic scope measurements at the same time, and is also equipped with several exciting softwares which are listed below.

The Oscilloscope is also equipped with these exciting features:

  • Connect-and-View - this allows users to get the benefit of precise triggering automatically, without needing to manually press a button. This does not sacrifice reliability and accuracy, so the user can sit back and let Connect-and-View do the work.
  • TrendPlot - this acts as a digital recorder and stores equipment faults, eliminating the need for paper or alternative records. The ScopeMeter can identify intermittent faults, which are often challenging to locate.
  • ScopeRecord - the ScopeRecord memory can accommodate up to 30,000 or more data points per channel, adeptly capturing intermittent events and glitches as brief as 8 nanoseconds.

Fluke Connect-and-View

If the wrong settings are used on an oscilloscope, the wrong measurement data will be displayed which can severely impact the accuracy of results. Connect-and-View can recognise signal patterns, set up the correct triggering, and provide a stable and accurate display. The user can sit back as Connect-and-View automatically recognises signal changes.

Optional FlukeView

FlukeView can expand the power of Fluke's testing tools, by addressing the demands for reporting and documentation through documenting, storing, and the analysis of readings or measurements.

By selecting the kit option from the drop-down menu above, you will receive a code for the full version of FlukeView, which allows a user to edit an existing form or create a new form to customize the report to individual needs.

The 190-502-III Kit Option

The 190-502-III is supplied with a wide range of accessories, such as a Battery Charger/Mains Adaptor, BP291 Battery, and various test leads and clips that are listed in full below in the 'What's in the Box?' section. However, if you opt for the kit option, you will receive all of these accessories, plus a carry case, a code for FlukeView Software, and a Wi-Fi dongle.

Fluke Selection Guide - Decide What Is Best for You

Features 123 124 125 190-062 190-102 190-202 190-104 190-204 190-504
Bandwidth (MHz) 20 40 40 60 100 200 100 200 500
Scope Inputs 2 2 2 2 2 2 4 4 4
Dedicated DDM 2 2 2 1 1 1 - - -
Dual Input Trendplot ✓ ✓ ✓ ✓ ✓ ✓ - - -
Four Input Trendplot - - - - - - ✓ ✓ ✓
ScopeRecord Mode - - - ✓ ✓ ✓ ✓ ✓ ✓
Automatic Capture & Replay Mode - - - ✓ ✓ ✓ ✓ ✓ ✓
Cursors - ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Zoom - - - ✓ ✓ ✓ ✓ ✓ ✓
Bus Health Test Mode - - ✓ - - - - - -
Advanced Power Measurements     ✓ ✓ ✓ ✓ ✓ ✓ ✓
EN61010-1 CAT III Safety Rating 600V 600V 600V 1000V 1000V 1000V 1000V 1000V 1000V
EN61010-1 CAT IV Safety Rating - - - 600V 600V 600V 600V 600V 600V
Battery 7 hr NiMH 7 hr NiMH 7 hr NiMH 4 hr Li0Ion (8 hr Opt) 4 hr Li0Ion (8 hr Opt) 7 hr Li-Ion 7 hr Li-Ion 7 hr Li-Ion 7 hr Li-Ion
Optical RS-232 ✓ ✓ ✓ - - - - - -
Isolated USB Opt Opt Opt ✓ ✓ ✓ ✓ ✓ ✓
Isolated USB Memory - - - ✓ ✓ ✓ ✓ ✓ ✓

Fluke part number: 5282495/5282508

Key Features

  • CAT III 1000V/CAT IV 600V safety rated
  • 60MHz bandwidth
  • 5.0GS/s
  • 10,000 samples per channel waveform
  • Dedicated 5000 Count digital multimeter
  • Connect-and-View for automatic triggering
  • ScopeRecord mode that captures waveform sample data
  • TrendPlot offers trend measurement readings up to 22 days
  • Advanced automatic measurements of power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP51 rating
  • Li-Ion battery for extended operating time

What's In The Box?

Both the FLUKE-190-502-III and FLUKE-190-502-III-S are supplied with:
  • Fluke 190-502-III ScopeMeter
  • Battery Charger/Mains Adaptor
  • BP291 Battery
  • 2 x VPS410-II-x Probes 500MHz (1 x red, 1 x blue)
  • Hangstrap
  • Handstrap
  • Download Information for FlukeView-2 Demo Package
  • USB Interface Cable
The following things are only supplied should you opt for the S kit:
  • CXT293 Protective Carry Case
  • Activation Code for FlukeView Software
  • Wi-Fi Dongle
Specification
Input Voltage Range
  • Rated maximum floating voltage - CAT III 1000V/CAT IV 600V (maximum voltage between any contact and earth-ground voltage level)
  • Probe input voltage VPS410-II - CAT III 1000V/CAT IV 600V (maximum voltage between standard 10:1 probe tip and reference lead)
  • Probe input voltage VPS421 - CAT III 1000V/CAT IV 600V (maximum voltage between probe tip or reference lead to GND, 2000V max between probe tip and reference lead)
  • Maximum BNC input voltage - CAT IV 300V (maximum voltage on BNC input directly)
  • Maximum voltage on meter input - CAT III 1000V/CAT IV 600V
Memory Save and Recall
  • Memory locations (internal) - 30 waveform memories plus 10 recording memories plus 9 screen copy memories
  • 30 waveform memories - Each memory can contain up to 2 or 4 waveforms plus corresponding setups
  • 10 recording memories - Each may contain: a 100 Screen Replay sequence, or a ScopeRecord Roll-mode recording (2 or 4 traces), or a TrendPlot recording of up to 4 measurements
  • External data storage - On PC, using FlukeView™-2 Software, or direct storage on external flash memory drive (maximum 32 GB) through USB host port
  • Screencopies - On PC, using FlukeView™-2 Software, or internally (in instrument) which can be copied on to external flash memory drive as .BMP-file, through USB host port
  • Volatility - Saving is done in non-volatile Flash-ROM and all data is secured, independent of battery or power status
  • Real-time clock - Provides date and time stamp information for ScopeRecord, for 100 Screen Replay sequences and for TrendPlot recordings
Case
  • Design - Rugged, shock-proof with integrated protective holster. Handstrap and hangstrap included as standard. Kensington lock supported to lock down instrument when left unattended
  • Drip and dust proof - IP51 according to IEC60529
  • Shock and vibration - Shock 30g, vibration (sinusoidal) 3g/ 0.03g2/Hz (Random), according to MIL-PRF-28800F Class 2
  • Display size - 133mm x 90mm (5.3in x 3.5in) LCD
  • Resolution - 1120 pixels x 765 pixels
  • Brightness - User-adjustable, up to 300 cd/m2
Mechanical Data
  • Size - 265mm x 192mm x 70mm (10.5in x 7.6in x 2.8in)
  • Weight (including battery) - 2.2kg (4.8lb)
Power
  • Line Power - Universal mains adapter/battery charger BC190/830 included, with detachable 2-wire power cords 100Vac to 240Vac, ±10 %, 50-60Hz
  • Battery Power - Re-chargeable Li-Ion battery (included). Battery swappable through easily accessible battery door at the rear of the instrument
  • Battery type (incl.) and capacity (+opt. battery) - BP291: 10.8V, 5000mAh
  • Battery charge indicator - Battery has built-in status indicator for use with external charger, next to battery status indicator on instrument screen
  • Battery operating time (with backlight low) - Up to 3.5 using BP290 (included), up to 7 hours using BP291 (optional)
  • Battery charging time - 5 hours using BP291
  • Battery power saving functions - Auto ‘power down’ with adjustable power down time. Automatic ‘display off’ with adjustable power down time. On-screen battery power indicator
Safety
  • EN61010-1, Pollution Degree 2; IEC61010-2-030: CAT IV 600V/CAT III 1000V
Environmental
  • Operating temperature - Battery discharging: 0°C to 40°C (32°F to 104°F), Battery charging: 0°C to 40°C (32°F to 104°F)
  • Storage temperature - -20°C to 60°C (-4°F to 140°F)
  • Humidity - 0°C to 10°C (32°F to 50°F): noncondensing, 10°C to 30°C (50°F to 86°F): 95% (±5%), 30°C to 40°C (86°F to 104°F): 75% (±5%), 40°C to 50°C (104°F to 122°F): 45% (±5%)
  • Maximum operating altitude - CAT IV 600V, CAT III 1000V: up to 2000m (6,600feet), CAT IV 300V, CAT III 600V, CAT II 1000V: up to 4000m (13,000 feet)
  • Maximum storage altitude - 12km (40,000ft)
  • Electro-Magnetic Compatibility - IEC 61326-1: Industrial; CISPR 11: Group 1, Class A; Korea (KCC): Class A Equipment (Industrial Broadcasting and Communication Equipment): USA (FCC): 47 CFR 15 subpart C
  • Interfaces - Two USB-ports provided. Ports are fully insulated from instrument’s floating measurement circuitry. USB-host port directly connects to external flash memory drive (up to 32GB) for storage of waveform data, measurement results, instrument settings and screen copies. Alternatively, this USB-A port may be used to connect a WiFi. Adaptor for wireless PC connectivity. A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under PC-control using FlukeView-2.
  • Probe calibration output - Dedicated probe-cal output with reference contact provided, fully insulated from any measurement input channel. Generator Output: 1.225Vpp/500Hz square wave
  • Warranty - 3 years on main instrument, 1 year on battery and accessories