Fluke 28 II Ex IP67 Intrinsically Safe Industrial Multimeter

Fluke 28 II Ex IP67 Intrinsically Safe Industrial Multimeter

The Fluke 28 II Ex Intrinsically Safe Industrial Multimeter is a sturdy industrial multimeter that is suitable for use in environments with potential explosion risks, for example, the oil and gas sector, pharmaceuticals and food factories as its ATEX ‘intrinsically safe’ approval certifies that it is incapable of releasing enough energy to form a spark and cause an explosion. It is suitable for IIC (gas), Zone 1 and 2 and IIIC (dust), and Zone 21 and 22.

The Fluke 28 II Ex boasts the capability to assess an impressive array of parameters including AC/DC voltage (1000V), AC/DC current (10A), resistance (50MΩ), conductance (60.00nS), duty cycle (99.9%), capacitance (9999µF), frequency (1999.99kHz), and temperature (-200˚C to 1090˚C).

Diode testing is also possible with the Fluke 28 II Ex whilst True RMS measurement for AC readings safeguards accuracy. Peak capture helps provide a really clear picture for the user. Options for auto and manual ranging provide further choice whilst relative mode compensates for test lead resistance. High resolution measurement allows testing of specialist equipment such as flame detectors and thermistors.

The backlit screen can be switched between 6000 and 20,000 counts and also has a bar graph display, auto hold, and min/max/avg data recording whilst the simple operation of the Fluke 28 II Ex makes it simple to use, especially useful in tricky conditions.

The Fluke 28 II Ex is IP67 rated for outdoor use and also has an extended operating temperature range of -15˚C to 55˚C. It can even operate down at -40˚C for a short period of 20 minutes. The resilient plastic holster can absorb a fall of up to 3m and the user can be sure that the device will stand up to the challenges of field use.

The inputs of the Fluke 28 II Ex are rated as Cat III to 1000V and Cat IV to 600V whilst a visual warning tells the user if the wrong inputs are engaged. The user also benefits from illuminated buttons, a long battery life and a supplied accessories that include crocodile clips, test leads and test probes.

Fluke part number: 28IIEx

Key Features

• ATEX-approved for IIC (gas), Zone 1 and 2 IIIC (dust), and Zones 21 and 22
• AC/DC voltage up to 1000V
• AC/DC current up to 10A
• Resistance up to 50MΩ
• Capacitance up to 9999µF
• Frequency up to 199.99kHz
• Temperature from -200˚C to 1090˚C (depending on thermocouple)
• True RMS measurement for AC values
• Diode testing
• IP67 dust and waterproof rating
• Large operating temperature range
• Cat III to 1000V and Cat IV to 600V
• 3m drop tested
• High resolution, backlit screen
• Auto hold, min/max/avg, peak hold
• 400-hour battery life