Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Fluke 718 Pressure Calibrator

Fluke
SKU: FLUKE718-CONF
  • Pressure source and mA measurement tool which allows the user to perform pressure calibrations
  • This easy-to-clean instrument has been one meter drop tested and is protected from liquid damage
  • Available in 4 different models, the 718 offers complete flexibility that is tailored towards specific jobs
More Info

"Buy a Fluke, get a FREE Fluke" promotion. Spend £150 or more on any qualified Fluke product(s) and claim a FREE Fluke gift!
[Click here to learn more] Offer is valid from 1st March to 31st August 2024.

Fluke 718 Pressure Calibrator

The Fluke 718 Pressure Calibrator is the perfect tool for performing a pressure calibration on transmitter, gauges and switches. The ergonomic design of the instrument means it is highly-suitable to field work, being around a third of the size of other similar products. The 718 also has an extremely easy-to-clean pump which means that the instrument does not have to be disassembled for service. Using protective check valves which allow air to pass through and clean the pump, without allowing fluids to enter and cause damage to the instrument.

The simple but accurate error % calculation allows the user to make pass/fail decisions at speed, without sacrificing quality and accuracy. Complete with a min/max/hold function, it is simple for the user to compare, document, and analyse changing measurements as they happen. With an mA accuracy of 0.015% and an in-built pressure switch test function, you can be certain that the 718 will provide accurate results, and allow for widespread usage should that be what the job requires.

The Fluke 718 Pressure Calibrator is available in 4 different calibration models, which are:

  • FLUKE 718-1G (Range 68.9 mbar)
  • FLUKE 718-30G (Range 2 bar)
  • FLUKE 718-100G (Range 7 bar)
  • FLUKE 718-300G (Range 20 bar)

The 718 comes with several accessories, such as one pair of TL75 Test Leads, a set of AC175 Alligator clips, and an already-installed Protective Boot.

Fluke part number: FLUKE 718 1G, FLUKE 718 30G, FLUKE 718 100G, FLUKE 718 300G

Key Features

  • Measure the pressure source and mA to calibrate pressure on devices
  • Built-in pump for sourcing pressure to 300psi
  • Easy-to-clean, field-serviceable, in-built pressure pump
  • Built-in switch test for calibrating pressure switches
  • Extend pressure capabilities by using Fluke 750P pressure models
  • Error % calculation
  • Min/max/hold function
  • mA accuracy of 0.015%
  • Available in 1, 300, 100, and 300 psi ranges
  • Comes with lots of different accessories

What's In The Box?

  • Fluke 718 Pressure Calibrator
  • Protective Boot (already installed)
  • (2) 9V batteries (already installed)
  • Traceable calibration certificate with data
  • 1 pair of TL75 Test Leads
  • 1 set of AC175 Alligator Clips
  • A 3-year warranty
  • Quick Reference Guide

The FLUKE 178 1G (68.9 mbar) also comes with:

  • Protective Yellow Holster with test lead storage
  • Instructions Sheet (in 14 languages)
Specification

Technical Specifications

Fluke 718 Series

  • Measure pressure - (Internal sensor)
  • Accuracy - 0.025%, full scale
  • Functions - Zero, min/max, hold, damp
  • DRY AIR, NON-CORROSIVES ONLY

Fluke 718 1G

  • Range - -1psi to + 1psi, -68.9mbar to 68.9mbar (-6.89kPa to 6.89kPa)
  • Resolution - 0.0001psi, 0.001mbar, 0.0001kPa
  • Over pressure - 5x full scale
  • Functions - Zero, Min, Max, Hold, Damp

    • Fluke 718 30G

    • Range - -12psi to 30psi, (-850mbar to 2bar, -85 to 206.84kPa)
    • Resolution - 0.001psi, 0.1mbar, 0.01kPa
    • Over pressure - 5x full scale
    • Functions - Zero, Min, Max, Hold, Damp

    Fluke 718 100G

    • Range - -12psi to 100psi, (-850mbar to 7bar, -85 to 689.48kPa)
    • Resolution - 0.01psi, 1mbar, 0.1 kPa
    • Over pressure - 2x full scale
    • Functions - Zero, Min, Max, Hold, Damp

    Fluke 718 300G

    • Range - -12psi to 300psi, (-850mbar to 20bar, -85 to 2068.42kPa)
    • Resolution - 0.01psi, 1mbar, 0.1kPa
    • Over pressure - 375psi, 25bar
    • Functions - Zero, Min, Max, Hold, Damp

    Fluke 718 Series via 700 Series Pressure Modules

    • Range - 29 pressure modules, 0 – 1 inH20 to 10,000psi, 2.5mbar to 700bar. Over pressure per pressure module specs
    • Resolution - Per pressure module specs
    • Accuracy - To 0.025% of full span, per pressure module specs
    • Functions - Zero, Min, Max, Hold, Damp
    • MEDIA COMPATIBILITY PER PRESSURE MODULE SPECS

    Fluke 718 Series via Built in Pump

    • Range - -12psi or -850mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm
    • Loop power range - 24 V DC
    • Accuracy - ±10%
    • Drive; 20mA into 1000 Ω for battery > 6.8V; 700 Ω for battery 5.8 to 6.8V

    mA Measure

    • Range - 0mA to 24mA
    • Resolution - 0.001mA
    • Accuracy - 0.015% + 1 count

    General Specifications

    • Maximum Voltage - 30 volts (non-operating)
    • Temperature - -40°C to 60°C
    • Operating temperature - -10°C to 55°C
    • Relative humidity - 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C)
    • Operating altitude - 3,000 M max
    • Shock - 1M drop tested
    • Vibration - Random, 2g, 5Hz - 500Hz
    • Safety - CSA C22.2 No. 1010.1: 1992
    • EMC - EN50082-1: 1992 and EN55022: 1994 Class B
    • Size - 216 x 94 x 66mm (8.50 x 3.72 x 2.60in)
    • Weight - 992g (35oz)
    • Power, battery life - 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
    • Battery life - 4 to 20 hours typical, depending on functions used
    • Warranty - Three years (one year on pressure pump in Fluke 718)
    • Display - LCD, 5 digit pressure and current simultaneous
    • For use with non-corrosive gasses