Fluke 729 Pro Automatic Pressure Calibrator (choose option)

Fluke 729 Pro Automatic Pressure Calibrator (choose option)

The Fluke 729 Pro Automatic Pressure Calibrator has been expertly designed to simplify the process of pressure calibration, and provide faster, more accurate testing results. The 720 Pro makes pressure calibration easier than ever, with an internal electric pump that provides automatic pressure generation and regulation. Rugged and easy-to-use, the 729 Pro allows the user to simply type in a target pressure, which will then be automatically pumped up to the desired point. Pressure is then automatically stabilised at the required value, thanks to internal fine adjustment controls. A test template can also be filled, and the 729 Pro will then both automatically pump and document a multiple-point pressure calibration test at the touch of a button.

The Fluke 729 Pro is able to automatically test multiple pressure test points, and can then automatically document the results. The instrument will document and flag out-of-tolerance test results in red on the display, for applied pressure, measure mA, mV or digital PV, or for % error for each test point. The pressure calibrator has been tested and warranted to withstand a 1-meter drop test, ensuring it is fit for field work, and can be relied on in situations where they are needed most. The user is able to choose between one of two models, which are as follows:

• 4M up to 600 psi (40 bar, 4000 kPa)
• 7M up to 1000 psi (70 bar, 7000 kPa)

These Automatic Pressure Calibrators are designed to perform whenever and wherever you need them. For greater accuracy and resolution on low pressure calibrations, the Fluke 729 Pro allows the user to select and insert one of 6 Fluke Pressure Modules to expand the pressure range between 0-600psi (40 bar, 4000 kPa). Simply select one of these from the ‘Optional Accessories’ tab on this product page, or click here to view them in further detail.

HART Communication

Built in HART communication capabilities allow for HART transmitter mA adjustments, HART configuration, and the ability to adjust to applied 0% and 100% values. Aswell as these abilities, the 729 is also able to set fixed mA outputs for troubleshooting, variables & read device diagnostics, and read device configuration.

Key Features

• Select one of two pressure control modules: 4M up to 600 psi (40 bar, 4000 kPa), and 7M up to 1000 psi (70 bar, 7000 kPa)
• Has built-in test templates with one-key calibration
• HART communication allows for the sending and receiving of digital data
• Allows for pressure leakage testing
• Automatic fine-pressure adjustment and automatic pressure stabilisation
• Equipped with a powerful, replaceable Li-ion battery
• Rugged and portable design with a three-year warranty
• Can be equipped with one of six Fluke Pressure Modules for customisation and tailoring to the job required