Radiodetection Builders Accessory Pack

Radiodetection Builders Accessory Pack

The Radiodetection Builders Accessory Pack provides users with a Radiodetection Genny4 signal generator, a standard 33kHz Sonde, M10 spring and 100mm (4") clamp. A soft carry case enables easy storage and transportation of the Genny and all accessories.

Radiodetection Genny4 Signal Generator

The Radiodetection Builders Accessory Pack includes a Radiodetection Genny4 Signal generator. The Genny4's patented simultaneous dual frequency signal output allows for the location of small diameter cables such as telecoms and street lighting. When used alongside a CAT4 locator (not supplied) both signals are detected at the same time. The Genny4's power boost function enables the user to locate signals over greater distances and depths, whilst coupling to utilities more easily.

All Radiodetection CAT4 and Genny4 products are Network Rail approved – please click here to view the Network Rail Certificate.

With a high strength Neodymium magnet the Genny4 can easily be attached to utility cables through magnetic street furniture such as lampposts or motoring signs. Compatible with C.A.T4 detectors, the Genny4 is also backwards compatible allowing use with all C.A.T3 and Genny3 accessories.

Radiodetection Standard Sonde 33kHz, depth up to 5m (10/SONDE-STD-33)

The Radiodetection Standard Sonde 33kHz is a self contained battery operated Sonde. It can be connected to a flexor for the location of pipes and ducting. The sonde has a frequency of 33kHz with a location depth of up to 5m.

Radiodetection M10 Spring Coupling

The M10 spiring coupling has both an M10 male and M10 female thread. The spring coupling fits between the end of a Flexrod and Sonde and reduces the shock to the Sonde hitting the wall of a pipe or to ease the Sonde around a need.

Radiodetection Genny Clamp 4" (100mm) (10/GENNY-CLAMP-100)

The Radiodetection Electricians Accessory Pack includes a 100mm clamp to apply a Genny single to a specific cable or pipe. This can be particularly useful where direct connection is not possible, or on live cables when these cannot be de-energized.

Key Features

• Genny4 provides Small cable locating
• High strength Neodymium magnet
• Genny4 signal boost the signal output up to ten times, allowing utility location over greater distances and depths.
• Reverse compatibility allowing the Genny4 to be used along side C.A.T3 and C.A.T4 locators.
• Radiodetection soft carry bag soft can hold a Radiodetection C.A.T Locator (not supplied), Genny and additional accessories
• Radiodetection Genny Clamp 4" (100m) allows a Genny signal to be applied to a specific cable or pipe.
• Standard Sonde 33kHz can be connected to a flexor for the location of pipes and ducting. The sonde has a frequency of 33kHz with a location depth of up to 5m.
• 100mm clamp to apply a Genny single to a specific cable or pipe