Free Delivery Over £249*

Next Day Delivery*

60 Day Returns Guarantee

Seaward Primetest 250 PLUS 3-Phase PAT Testing Kit

Seaward
SKU: SEAW2503PHASEKIT
  • THE ultimate PAT kit for actively testing 3-Phase appliances
  • Includes Seaward TPA 3-Phase Adaptors for 16A and 32A 5 Pin equipment
  • Includes a vast range of other essential PAT testing accessories
More Info
£1,138.80 £949.00
Out Of Stock

Seaward Primetest 250 PLUS 3-Phase PAT Testing Kit

The Seaward Primetest 250 PLUS PAT 3-Phase Kit has been designed for users who are required to conduct a full PAT test on 16A and 32A 3-Phase equipment found in factories and workshops. Complete with manual entry software this is the ideal kit for keeping a record of tested appliances along with report printing functionality.

Seaward Primetest 250 PLUS Key Features:

  • Logs and downloads PAT results and appliance ID numbers
  • Tests to full compliance with the IEE Code of Practice
  • Full and comprehensive 3-Phase Equipment testing (using supplied adaptors)
  • RCD Trip Time Testing
  • Battery driven for mains free testing
  • Tests IEC leads including polarity check
  • Automatic Test Sequences
  • Hand held and Lightweight
  • Selectable 250V or 500V Insulation Test.
  • 3-Phase Equipment testing (using supplied adaptor)
  • Carries out Protective Conductor/Touch Current (using mains supply on both single and 3-phase.

The Seaward Primetest 250 PLUS Portable Appliance Tester offers simple operation for performing PAT testing, RCD testing and 3-phase testing. In addition this PAT tester also has a 250V DC insulation test for sensitive appliances and surge protected leads.

Test results are stored on the internal memory and can be downloaded into a basic PAT utility programme or manually typed into PATGuard Elements software for creating professional certificates and reports. 

The Primetest 250 PLUS 3-Phase kit comes suppplied in a bespoke bag to fit the PAT tester and basic accessories. This also includes the NTB-1 RCD Isolator allowing trip time testing on portable RCD's in accordance with the IET Code of Practice while isolating the RCD and thus not risking trippping the mains supply when testing. 

The auto test sequence buttons and clear display of Pass/Fail with test results make the Primetest 250 PLUS PAT tester perfect for both entry-level and intermediate users. 

This is the ideal kit if you are looking for a versatile and battery powered PAT tester supplied with the equipment suitable for properly PAT testing 16A and 32A 3-phase appliances. 

This kit includes:

What's In The Box?

  • Seaward Primetest 250 PAT Tester
  • SimplyPATs Version 7 Manual Software
  • Seaward 16A Three Phase Adaptor
  • Seaward 32A Three Phase Adaptor
  • Seaward NTB-1 RCD Adaptor
  • Microwave Leakage Detector
  • 150 Microwave Emission Labels
  • 110V Appliance Adaptor
  • 110V Extension Lead Adaptor
  • IEC PAT Adaptor Kit
  • TEK989 Socket Tester
  • 1000 Pass Labels
  • 200 Fail Labels
  • 250 PassWrap Cable Labels
  • 100 PermaTAG Industrial Cable Labels
  • Earth Bond Lead
  • 230V Extension Lead
  • Mains Lead
  • 6 x AA Batteries
  • Seaward PATBag Carry Case
Specification

Earth Continuity

  • Output Current: 200mA
  • Test Voltage (o/c): 9V DC nominal
  • Test Duration (Class I Test): 2s nominal
  • Display Range: 0.01 ohm to 19.99 ohm
  • Pass Value (Class I Test): 0.2 ohms

Insulation Resistance

  • Test Voltage: 250/500VDC @1mA nominal, < 2mA (s/c)
  • Test Duration (Class I or II): 2s
  • Display Range: 0.01 Mohm to 19.99 Mohm
  • Pass Value: 1.0 Mohm (Class I), 2.0 Mohms (Class II)

Equivalent Leakage

  • Test Voltage: 40V Nominal AC 50Hz Open Circuit
  • Test Duration: 2s – 30s nominal
  • Display Range: 0.1 mA to 19.99mA
  • Pass Value: 0.75mA (Class I), 0.25mA (Class II)

IEC Lead Test

  • Test voltage: 5V DC nominal
  • Test Duration: Time for test (2s max)
  • Test: Live / Neutral Checks for o/c, s/c and crossed

Protective Conductor Current

  • Test Voltage: Supply Voltage, max current 13A
  • Test Duration: 30s maximum
  • Display Range: 0.15 mA to 9.99 mA
  • Pass Value: 0.75mA/3.5mA (user selectable with 0.75mA as default)

Touch Current

  • Test Voltage: Supply Voltage, max current 13A
  • Test Duration: 30s maximum
  • Display Range: 0.10 mA to 5.00 mA
  • Pass Value: 0.25mA

3 phase differential leakage current (Requires 3 phase adaptor accessory)

  • Test Voltage: 3 phase supply voltage
  • Test Duration: continuous measurement
  • Display Range: 0.10 mA to 9.99 mA
  • Pass Value: 3.5mA

RCD Trip Time

  • Test Voltage: Mains supply voltage
  • Test Current: 10mA / 30mA rms sinusoidal
  • Test Current Phase: 0°/180° auto switched on alternate tests
  • Measuring Range: 0ms – 500ms
  • Pass Value: 200ms

Power Socket Check

  • Input voltage range: 225 – 254V AC max current 13A UK
  • Indicators: Phase to Earth, Phase to Neutral, Neutral to Earth