Socket & See Fuse Finder & Dead Circuit Tracer Kit

Socket & See Fuse Finder & Dead Circuit Tracer Kit

The Socket & See Fuse Finder & Dead Circuit Tracer Kit combines the FFCB200 UK Easy Fuse Finder Kit and the DCF200 Dead Circuit Finder.

DCF200 Dead Circuit Finder

Quickly discover faulty fuses feeding dead circuits by utilising the DCF200 receiver/transmitter and the simple, single button operational system which automatically adjusts to received signal strength. Use the device to trace wires through floors and walls up to 50cm away, detect a break in the wire, locate the correct wire from a loom/bundle and find circuits by tracing the individual conductor.

Indication is given by the DCF200 receiver through audible and visual means, including a user-friendly LED bar graph and an audible tone. The receiver features an auto power-off, low battery indication and self-check facility for continued optimal performance.

The DCF200 transmitter operates with or without an earth, is fully protected against accidental mains connection (up to 440V) and warns the user of a short circuit or potentially dangerous voltage. It also boasts an auto-off feature and low battery indicator.

Both the receiver and transmitter of the DCF200 is powered by a 9V battery and does not require mains connection.

FFCB200 UKA

A comprehensive fuse finder kit, the FFCB200 utilises a visual bar graph and audible tone indicator system when locating fuses and circuit breakers. The included test lead kit provides connection to DBs and lighting circuits.

The FFCB200 employs dual voltage operation 100 to 250VAC (50-60Hz) and an auto scan function to detect fuses and circuits.

The self-calibrating microprocessor built into the FFCB200 ensures accurate results with each use.

Key Features

• Combines the FFCB200 UK Easy Fuse Finder and the DCF200 Dead Circuit Finder
• User-friendly DCF200 with single button system for finding the fuse feeding the dead circuit
• A receiver which automatically adjust to incoming signal strength
• Trace wires through walls and floors
• Detect a break in the wire and identify a wire in a loom/bundle
• The DCF200 receiver employs a dual visual/audible indicator and self-check facility
• The transmitter functions with or without an Earth being present
• Both the receiver and transmitter of the DCF200 are battery powered with an auto-off feature
• The FFCB200 UK indicates results through an LED bar graph combined with an audible tone
• Dual voltage operation 100 to 250VAC (50-60Hz)
• Auto scan function
• Self-calibrating microprocessor for consistently accurate results

Socket & See part number: SOC/FFCDCFKIT